USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of an iot based smart fan". Please, sit back and study the below research material carefully. This project topic "user’s satisfaction with functionality of space in selected sport complex" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of an iot based smart fan" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of an iot based smart fan" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
APPROVAL PAGE
This is to certify that the research work, "design and construction of an iot based smart fan" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of an iot based smart fan" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of an iot based smart fan" visible for everyone, then the complete material on "design and construction of an iot based smart fan" is to be ordered for. Happy viewing!!!
Electricity has been known as a resource in our daily life; it is also used almost in all the places both in office, home and industries. Presently, in developing countries such as Nigeria, the supply of electricity is witnessing a huge short supply and doesn’t meet the current population demand. This is due to two main constraints; the one is that there is a limited amount of electricity production and the second one is due to the misuse of electricity just by ignoring to switch off the device when they are not needed. The first constraint can be resolved by change in the government policy to increase more number of production units, whereas the second constraint will be eliminated by adopting the emerging IoT technologies. In this paper we proposed a special type of device called Smart Fan as a model for addressing the above scenario. The Smart Fan includes an ultrasonic sensor with wireless enabled IoT technologies that activates and deactivates the ON/OFF operation based on detecting the human presence. The system also contains a LCD display unit for indicating the room temperature. The model was integrated with the android mobile app for controlling the Smart Fan manually as well. The device is implemented in the office working environment, which results a huge power saving of electricity and helps to improve the life of the fan unit.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
- BACKGROUND OF THE PROJECT
- PROBLEM STATEMENT
- AIM AND OBJECTIVE OF THE PROJECT
- PURPOSE OF THE STUDY
- APPLICATION OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- LIMITATION OF STUDY
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- HISTORICAL BACKGROUND OF FAN
- REVIEW OF DIFFERENT TYPES OF FANS
- OVERVIEW OF INTERNET OF THINGS
- HISTORICAL BACKGROUND OF INTERNET OF THINGS
- APPLICATIONS OF IOT
- REVIEW OF RELATED STUDIES
CHAPTER THREE
METHODOLOGY
- SYSTEM BLOCK DIAGRAM
- HARDWARE USED
- SOFTWARE USED
- CIRCUIT DIAGRAM
- WORKING OF THE SYSTEM
CHAPTER FOUR
4.0 TEST AND RESULT ANALYSIS
- RESULT AND DISCUSSION
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
REFERENCES
CHAPTER FOUR
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Energy conservation is the effort made to reduce the consumption of energy by using less of an energy service. Energy saving, in any system, deals with the minimization of energy wastage. To achieve this, the efficiency of the individual components and processes of the system needs to be improved. Automatic control refers to any controlling mechanism which does not require any human intervention.
Automation has become a popular topic in the modern-day technology. Each person tends to use automated devices in his or her daily life due to multiple reasons ranging from safety to ease of handling. The small-scale industrialists, therefore, have focused to increase their market to the public in a more efficient way.
Most of the living rooms are not well arranged with air conditioning. So fan is the main way of cooling down and is used in most of the houses. In traditional fan the user has to control it manually each time by walking towards the switch board. The basic need of automatic speed control is to reduce the consumption of power and human effort. In the traditional system there is wastage of electrical energy and it is controlled manually. To overcome the drawbacks of the traditional system an automatic control system of the fan is proposed.
The Internet of Things (IOT) has also emerged to make smart devices smarter. With the evolution of Internet of Things (IOT) all these manually controlled electrical and electronic devices can be controlled automatically using a smartphone or other similar devices. China Communication Standards Association gives three layer structure of IOT: The first layer is the sensing layer mainly used for collecting information; the second layer is the network layer used for information transmission and processing; the third layer is the application layer used for storage and decision making.
The main concept of IOT is that it can create a virtual connection between a hub or a network and electronic and electrical objects. This virtual connection helps to control, locate, and track down these connected objects. On the basis of device-to -device connectivity concept the development of smart sensor together with communication technologies such as Wi-Fi, Bluetooth etc.
So we have designed a circuit which will solve the above problems using above method and make the use of fan more user friendly by making the process smart.
The rest of this paper is organized as follows. We will first start with problem statement then introduce the various Hardware and Software used in this system. In next section we will represent and explain the block diagram for the system. Then we will show and explain the circuit diagram of the system. It is followed by the flow chart of the system. Then it’s ended by the conclusion.
The main problem with existing conventional fans like ceiling fan, table fans, pedal fans, etc. is that the user has to control it manually each time by walking towards the switch board; which can be a serious issue for senior or disabled persons. In addition, the power consumption in these types of conventional fans is high given the amount of air flow produced. Our proposed method can solve this problem effectively and provide a smart speed control in a much efficient way. The final prototype fan can increase user’s comfort level as it can be controlled automatically based on human presence and manually using smart phone.
1.3 AIM AND OBJECTIVES OF THE STUDY
The main aim of this study is to build an IOT based electric fan which operates both automatically and manually – using android.
The objectives are:
- To build a fan that is controlled with your smart phone which can be useful and friendly to disable people in a room.
- To build a fan is able to sense temperature of the environment and work with it via temperature sensors.
- To save energy
- To reduce human labour
1.4 PURPOSE OF THE STUDY
The purpose of the study is to conserve electricity and to increase user’s comfort level as it can be controlled automatically based on human presence and manually using smart phone.
1.5 APPLICATION OF THE PROJECT
This device can be used for temperature control electrical appliances such as:
- Air conditioner
- Refrigerator
- Fan,
- furnace etc.
- homes
- industries
1.6 SIGNIFICANCE OF THE PROJECT
i. The advantages of such a system are less energy usage, and provides more convenient to the consumers.
ii. This will help in saving the energy / electricity.
1.7 LIMITATION OF STUDY
As we all know that no human effort to achieve a set of goals goes without difficulties, certain constraints were encountered in the course of carrying out this project and they are as follows:-
- Difficulty in information collection: I found it too difficult in laying hands of useful information regarding this work and this course me to visit different libraries and internet for solution.
- Financial Constraint: Insufficient fund tends to impede the efficiency of the researcher in sourcing for the relevant materials, literature or information and in the process of data collection (internet).
- Time Constraint: The researcher will simultaneously engage in this study with other academic work. This consequently will cut down on the time devoted for the research work.
1.8 PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study, chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of an iot based smart fan" is also available. Order full work to download. Chapter two of "design and construction of an iot based smart fan" consists of the literature review. In this chapter all the related work on "design and construction of an iot based smart fan" was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of an iot based smart fan" is available. Order full work to download. Chapter three of "design and construction of an iot based smart fan" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of an iot based smart fan" is available. Order full work to download. Chapter four of "design and construction of an iot based smart fan" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of "design and construction of an iot based smart fan" is available. Order full work to download. Chapter five of "design and construction of an iot based smart fan" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA: