+234 8146561114 (MTN) or
+2347015391124 (AIRTEL)

DESGN AND CONSTRUCTION OF AN RF SIGNAL DETECTOR

USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of an rf signal detector" Please, sit back and study the below research material carefully. This project topic "desgn and construction of an rf signal detector" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "desgn and construction of an rf signal detector" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "desgn and construction of an rf signal detector" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


APPROVAL PAGE

This is to certify that the research work, "desgn and construction of an rf signal detector" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on Electrical and Electronics Engineering has been approved.

By
Engr. ---                                                     Engr. ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
 Engr. ---
External Invigilator


DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work “desgn and construction of an rf signal detector” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “desgn and construction of an rf signal detector” visible for everyone, then the complete material on “desgn and construction of an rf signal detector” is to be ordered for. Happy viewing!!!


ABSTRACT

This work is an RF signal detector circuit which can be used to trace the presence of RF signals and electromagnetic noise in your residential area, office or shop. It can be a useful tool while testing or designing RF circuits. It can also be used to detect electrical noise in your premises. Electromagnetic noises can be produced by sparking in electrical installations or other sources. To detect the presence of RF signal or noise, you need a wide-band receiver that can capture these signals, this device is used.

TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT

CHAPTER ONE
1.0      INTRODUCTION
1.1      BACKGROUND OF THE PROJECT
1.2      AIM OF THE PROJECT
1.3      OBJECTIVE OF THE PROJECT
1.4      SIGNIFICANCE OF THE PROJECT
1.5      PURPOSE OF THE PROJECT
1.6      APPLICATION OF THE PROJECT
1.7      ADVANTAGES OF THE PROJECT
1.8      PROBLEM/LIMITATION OF THE PROJECT
1.9      PROJECT ORGANISATION

CHAPTER TWO
2.0     LITERATURE REVIEW
2.1      REVIEW OF RELATED STUDIES
2.2      REVIEW OF RELATED TERMS
2.3      REVIEW OF RF SIGNALS

CHAPTER THREE
3.0     CONSTRUCTION METHODOLOGY
3.1      SYSTEM CIRCUIT DIAGRAM
3.2     SYSTEM OPERATION
3.3      CIRCUIT DESCRIPTION
3.4      SYSTEM CIRCUIT DIAGRAM
3.5      CIRCUIT OPERATION
3.6      IMPORTANCE AND FUNCTION OF THE MAJOR COMPONENTS USED IN THIS CIRCUIT
3.7      POWER SUPPLY UNIT

CHAPTER FOUR
RESULT ANALYSIS
4.0      CONSTRUCTION PROCEDURE AND TESTING
4.1      CASING AND PACKAGING
4.2      ASSEMBLING OF SECTIONS
4.3      TESTING
4.4.1 PRE-IMPLEMENTATION TESTING
4.4.2  POST-IMPLEMENTATION TESTING
4.5      RESULT
4.6      COST ANALYSIS
4.7      PROBLEM ENCOUNTERED

CHAPTER FIVE     
5.1      CONCLUSION
5.2      RECOMMENDATION
5.3      REFERENCES


CHAPTER TWO: The complete chapter two of “desgn and construction of an rf signal detector” is available. Order full work to download. Chapter two of “desgn and construction of an rf signal detector” consists of the literature review. In this chapter all the related work on “desgn and construction of an rf signal detector” was reviewed.

CHAPTER THREE: The complete chapter three of “desgn and construction of an rf signal detector” is available. Order full work to download. Chapter three of “desgn and construction of an rf signal detector” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of “desgn and construction of an rf signal detector” is available. Order full work to download. Chapter four of “desgn and construction of an rf signal detector” consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a “desgn and construction of an rf signal detector” is available. Order full work to download. Chapter five of “desgn and construction of an rf signal detector” consist of conclusion, recommendation and references.



To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.


For more information contact us through Any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No
:+2348146561114

E
mail Address :engr4project@gmail.com


CLICK HERE FOR MORE RELATED TOPICS/MATERIAL

IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.