USER'S INSTRUCTIONS: The project work you are about to view is on design and construction of arduino based traffic lights system with vehicle counter. Please, sit back and study the below research material carefully. This project topic (design and construction of arduino based traffic lights system with vehicle counter) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of arduino based traffic lights system with vehicle counter" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of arduino based traffic lights system with vehicle counter" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF ARDUINO BASED TRAFFIC LIGHTS SYSTEM WITH VEHICLE COUNTER
BY
---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, design and construction of arduino based traffic lights system with vehicle counter by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of arduino based traffic lights system with vehicle counter" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of arduino based traffic lights system with vehicle counter: visible for everyone, then the complete material on "design and construction of arduino based traffic lights system with vehicle counter" is to be ordered for. Happy viewing!!!
This project work is on design and construction of a traffic lighting system with vehicle counter. This device was designed to replace a manual traffic control and vehicle method. The device is a portable traffic light unit which can be best utilized in controlling traffic flow in a high way. The automated portable traffic light system can reduce direct costs in man power utilization and increase safety for the road users. This system is applicable for public and privately funded road construction projects that require overnight or 24-hour traffic control as well as in different weather conditions.
The purpose of this project work is to design and construction a traffic light device that can be used to control the flow of traffic at road intersection and also used to counter the number of vehicle that passes on the high way.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- PROBLEM STATEMENT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- ADVANTAGES OF THE PROJECT
- PURPOSE OF THE PROJECT
- METHODOLOGY
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- OVERVIEW OF THE STUDY
- HISTORITICAL BACKGROUND OF TRAFFIC LIGHT
- REVIEW OF RELATED WORK
- TRAFFIC LIGHT MOUNTING
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BLOCK DIAGRAM
3.2 CIRCUIT DIAGRAM
3.3 CODE
3.5 CIRCUIT DESIGN
3.6 WORKING OF THE CIRCUIT
3.7 COMPONENT DESCRIPTION
CHAPTER FOUR
TEST AND RESULT ANALYSIS
- CONSTRUCTION PROCEDURE
- CASING AND PACKAGING
- ASSEMBLING SECTION
- PACKAGING
- MOUNTING PROCEDURE
- TESTING
- RESULT ANALYSIS
CHAPTER FIVE
5.0 CONCLUSION, RECOMMENDATION AND REFERENCES
- CONCLUSION
- RECOMMENDATION
REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Traffic lights, developed since 1912, are signaling devices that are conceived to control the traffic flows at road intersections, pedestrian crossings, rail trains, and other locations. Traffic lights consist of three universal colored lights: the green light allows traffic to proceed in the indicated direction, the yellow light warns vehicles to prepare for short stop, and the red signal prohibits any traffic from proceeding according to Gordon M. (1971)
Nowadays, many countries suffer from the traffic congestion problems that affect the transportation system in cities and cause serious dilemma. In spite of replacing traffic officers and flagmen by automatic traffic systems, the optimization of the heavy traffic jam is still a major issue to be faced, especially with multiple junction nodes [Moyer, Sheldon, 1947]. The rapid increase of the number of automobiles and the constantly rising number of road users are not accompanied with promoted infrastructures with sufficient resources. Partial solutions were offered by constructing new roads, implementing flyovers and bypass roads, creating rings, and performing roads rehabilitation.
However, the traffic problem is very complicated due to the involvement of diverse parameters. First, the traffic flow depends on the time of the day where the traffic peak hours are generally in the morning and in the afternoon; on the days of the week where weekends reveal minimum load while
Mondays and Fridays generally show dense traffic oriented from cities to their outskirts and in reverse direction respectively; and time of the year as holidays and summer.
Secondly, the current traffic light system is implemented with hard coded delays where the lights transition time slots are fixed regularly and do not depend on real time traffic flow. The third point is concerned with the state of one light at an intersection that influences the flow of traffic at adjacent intersections. Also, the conventional traffic system does not consider the case of accidents, road works, and breakdown cars that worsen traffic congestion. In addition, a crucial issue is related to the smooth motion through intersections of emergency vehicles of higher priorities such as ambulances, rescue vehicles, fire brigade, police, and VIP persons that could get stuck in the crowd. Finally, the pedestrians that cross the lanes also alter the traffic system.
The conventional traffic system needs to be upgraded to solve the severe traffic congestion, alleviate transportation troubles, reduce traffic volume and waiting time, minimize overall travel time, optimize cars safety and efficiency, and expand the benefits in health, economic, and environmental sectors. This paper proposes a simple, low-cost, and real time smart traffic light control system that aims to overcome many defects and improve the traffic management.
1.2 PROBLEM STATEMENT
Manual or traditional controlling of traffic flow and taking the count of vehicles passing on the way by the appointed personnel is time consuming and it involves much labour. This design replaces the manually used agent which is the traffic warden positioned at different traffic junctions which at the end improves traffic flow, saves labour and cost.
1.3 AIM OF THE PROJECT
This system aims to decrease the rate of traffic congestion and to determine the number of vehicles that passes on each lane of the traffic using arduino as the heart of the circuit.
1.4 OBJECTIVE OF THE PROJECT
The main objective of the study includes:
- To investigate the practicality of the theoretical knowledge about these components to be used.
- To experiment on the compatibility of the working relation between components to be used.
- To investigate the extent to which the design and construction of the control unit can be useful to mankind.
- To determine the number of vehicles that passes on the way
To investigate the immediate usefulness of the control system as complimentary to traffic wardens.
1.5 ADVANTAGES OF THE PROJECT
Thus with the aid of this circuit, rood accidents and traffic jam or hold up are highly minimized. When properly timed, a traffic signal increases the traffic handling capacity of an intersection, and when installed under conditions that justify its use, a signal is a valuable device for improving the safety and efficiency of both pedestrian and vehicular traffic. In particular, signals may reduce certain types of accidents, most notably, right-angle (broadside) collisions.
1.6 PURPOSE OF THE PROJECT
The primary purpose of the traffic light is to attain the safest and most efficient overall traffic flow possible.
1.7 METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:
- Study of the previous work on the project so as to improve it efficiency.
- Draw a block diagram.
- Test for continuity of components and devices,
- Design and calculation for the device was carried out.
- Studying of various component used in circuit.
- Construction of the circuit was carried out.
- Finally, the whole device was cased and final test was carried out.
1.8 PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study, chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of design and construction of arduino based traffic lights system with vehicle counter is also available. Order full work to download. Chapter two of design and construction of arduino based traffic lights system with vehicle counter consists of the literature review. In this chapter all the related work on design and construction of arduino based traffic lights system with vehicle counter was reviewed.
CHAPTER THREE: The complete chapter three of design and construction of arduino based traffic lights system with vehicle counter is available. Order full work to download. Chapter three of design and construction of arduino based traffic lights system with vehicle counter consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of design and construction of arduino based traffic lights system with vehicle counter is available. Order full work to download. Chapter four of design and construction of arduino based traffic lights system with vehicle counter consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a design and construction of arduino based traffic lights system with vehicle counter is available. Order full work to download. Chapter five of design and construction of arduino based traffic lights system with vehicle counter consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
