DESIGN AND CONSTRUCTION OF AUTOMATIC GATE OPENING AND CLOSING USING INFRARED SENSOR
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of automatic gate opening and closing using infrared sensor" Please, sit back and study the below research material carefully. This project topic "design and construction of automatic gate opening and closing using infrared sensor" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of automatic gate opening and closing using infrared sensor" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of automatic gate opening and closing using infrared sensor" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF AUTOMATIC GATE OPENING AND CLOSING USING INFRARED SENSOR
BY
---
EE/H2013/01430
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
SCHOOL OF ENGINEERING
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of automatic gate opening and closing using infrared sensor" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on Electrical and Electronics Engineering has been approved.
By
Engr. --- Engr. ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
Engr. ---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work “design and construction of automatic gate opening and closing using infrared sensor” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “design and construction of automatic gate opening and closing using infrared sensor” visible for everyone, then the complete material on “design and construction of automatic gate opening and closing using infrared sensor” is to be ordered for. Happy viewing!!!
The project is titled design and construction of an automatic gate opener using infrared sensor. Opening and closing of doors is always a tedious job, especially in places like shopping malls, hotels and theatres where a person is always required to open the door for visitors.
This project proposes a system of automatic opening and closing of door by using sensors. The PIR sensor transmitter emit infrared radiation from a considerable distance and sends it to the receiver, commanding the receiver to either open the gate or to close it. This sensing signal is fed to a controller to operate a door motor through motor driver IC. The sensor sends a logical command to open the door. The door automatically closes with a fixed time delay
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- SCOPE OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- PROBLEM OF THE PROJECT
- LIMITATION OF THE PROJECT
- APPLICATION OF THE PROJECT
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- REVIEW OF PIR SENSORS AND ITS APPLICATION
- TYPES OF MOTION SENSORS
- OTHER MOTION SENSOR FEATURES
- REVIEW OF DIFFERENT AUTOMATIC DOOR SENSORS
- REVIEW OF THE RELATED STUDY
- RESEARCH AND INVESTIGATION
CHAPTER THREE
SYSTEM DESIGN
- SYSTEM CIRCUIT DIAGRAM
- CIRCUIT DESCRIPTION
- SYSTEM COMPONENTS
- DESCRIPTION OF COMPONENTS USED
CHAPTER FOUR
TESTING AND RESULTS
- CONSTRUCTION PROCEDURE AND TESTING
- INSTALLATION OF THE COMPLET DESIGN
- CASING AND PACKAGING
- ASSEMBLING OF SECTIONS
- TESTING OF SYSTEM OPERATION
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCE
CHAPTER ONE
1.1 INTRODUCTION
An automatic opening and closing of door sensor involves open and closing a door using sensor: The most common single-technology sensor operated door uses passive infrared (PIR) energy to recognize the movement of heat in a protected space, and the sensor compose of the transmitter and the receiver.
This project proposes a system of automatic opening and closing of door by pressing a remote when we want the door to be close and vice-versa. This is achieved with help of a PIR (Passive Infrared) sensor. When the remote is pressed the sensor emits infrared energy which is been received by the receiver from a considerable distance. This sensing signal is fed to a controller to operate a door motor through motor driver IC.
When the remote is pressed, it sends a logical command to open or close the door. The door automatically closes with a fixed time delay. If there is no further movement within the PIR operating range. Interrupt signals are used through limit switches to avoid locked rotor condition of the motor.
1.3 OBJECTIVE OF THE PROJECT
The objective of this work is constructing a device that will automatically open a door by detecting the presence of human approaching the door.
1.4 SCOPE OF THE PROJECT
The principle of the project lies in the functioning of the PIR Sensor. A PIR or Passive Infra-red Sensor, as the name indicates, doesn’t emit infrared rays but only detects them.
All humans emit infrared radiations in the form of body heat. A PIR Sensor will capture the difference between the room temperature and body temperature in the form of change in infrared radiation. This change in infrared pattern is converted to a voltage. The voltage from the Data Out of the PIR Sensor can be given to an integrated circuit for further processing like controlling a motor. This work was built around : transformer, an ic, transistor, PIR sensor, diodes, motor with sliding door, Motor Driver IC
1.5 SIGNIFICANCE OF THE PROJECT
Automatic doors operate with the help of sensors. Sensors do exactly what they sound like they’d do: they sense things. There are many different types of sensors that can sense different types of things, such as sound, light, weight, and motion.
For example, some automatic doors operate when they’re triggered by sensors that sense weight. These weight sensors might be disguised in a rubber mat in front of the door. When you step on the mat, the sensors send a signal to the automatic doors that tells them to open.
Other automatic doors operate on optic or motion sensors. These sensors might be mounted above a set of automatic doors or built on the top or the sides of the frame of the automatic doors.
When these optic or motion sensors sense motion nearby, they trigger the automatic doors to open and then close. This is why, when you approach a set of automatic doors, they will open as soon as you get close enough to activate the sensors.
Automatic doors have many useful purposes, which is why you can find them in many different types of locations. From supermarkets to airports and many types of large buildings, automatic doors make it easier for people to get into and out of buildings. They are especially helpful for people who are handicapped.
Similar to revolving doors, automatic doors also help to save energy, since they limit the amount of time that doors are open to only those times people are entering or exiting a building. And if you’ve ever shopped until your hands are full of bags, you know how handy automatic doors can be when it’s time to head to the car!
1.6 PROBLEMS OF THE PROJECT
An automatic door have some problem:
- it has a limited distance to detect the human presence
- if the sensor for the automatic door is not mounted securely, normal vibration, sign, plants and neon light can trigger the door open.
- It cannot detect the small objects such as insects or raindrop.
- Other objects such as dogs can trigger the circuit
- The reliability of the sensor may also be affected by rapid environmental changes and direct sunlight. Also, things like a fireplace, and direct wind from an air conditioner or heater. This is because a PIR sensor actually detects changes in infrared energy - specifically, the "heat energy" emitted by normal human skin temperature.
1.7 LIMITATION OF THE PROJECT
- The establishment of electric entryways involves a good amount of money related use. This ranges from buying the gate to services for installation. to paying for the administration of the installers.
- Most of the companies give free after sales services to a certain period of time. However, it is super costly after the time period is lapsed.
- In case of power failure, malfunctioning system or anyone trapped inside your property can cause inconvenience.
- This device has a limited range to cover.
Automatic door aren't just used for home security only. In industrial fields, they are used on assembly lines to keep track of the number of products and to shut down dangerous equipment if a person gets too close. Here are a few other ways PIR sensors are used:
- To open and close automatic Doors
- To turn on and off automatic water faucets and toilets
- To turn on lights when a person enters a room
- To control ATM displays
- At automatic ticket gates
- For some parking meters
1.9 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to motion based automatic door opener. In this chapter, the background, significance, objective limitation and problem of an automatic door opener were discussed.
Chapter two is on literature review of an automatic door opener. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
CHAPTER TWO: The complete chapter two of “design and construction of automatic gate opening and closing using infrared sensor” is available. Order full work to download. Chapter two of “design and construction of automatic gate opening and closing using infrared sensor” consists of the literature review. In this chapter all the related work on “design and construction of automatic gate opening and closing using infrared sensor” was reviewed.
CHAPTER THREE: The complete chapter three of “design and construction of automatic gate opening and closing using infrared sensor” is available. Order full work to download. Chapter three of “design and construction of automatic gate opening and closing using infrared sensor” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of “design and construction of automatic gate opening and closing using infrared sensor” is available. Order full work to download. Chapter four of “design and construction of automatic gate opening and closing using infrared sensor” consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a “design and construction of automatic gate opening and closing using infrared sensor” is available. Order full work to download. Chapter five of “design and construction of automatic gate opening and closing using infrared sensor” consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.
For more information contact us through Any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
Watsapp No :+2348146561114
To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.