USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of bulk layer earth drilling machine" Please, sit back and study the below research material carefully. This project topic "design and construction of bulk layer earth drilling machine" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of bulk layer earth drilling machine" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of bulk layer earth drilling machine" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

DESIGN AND CONSTRUCTION OF BULK LAYER EARTH DRILLING MACHINE

BY

---
EE/H2013/01430
DEPARTMENT OF ---
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, "design and construction of bulk layer earth drilling machine" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a B.Sc on Public Health Education has been approved.

By
Dr. ---                                                    Dr. ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
 Dr. ---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work “design and construction of bulk layer earth drilling machine” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” visible for everyone, then the complete material on “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” is to be ordered for. Happy viewing!!!

---

This work is a bulk layer earth drilling machine. Drilling involves making a hole in a material using cutting equipment and can be done on the earth’s surface. A bulk layer earth drilling machine is a drilling method that uses a large helical shaped screw to extract material from the ground. When used for drilling, the auger drill bit screws into the soil and material is automatically moved up the shaft of the rotation device.
The purpose of this work is to increase the productivity and related traditional methods in agriculture.  

 

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT

CHAPTER ONE
INTRODUCTION
1.1      BACKGROUND OF THE PROJECT

1. PROBLEM STATEMENT
2. OBJECTIVE OF THE PROJECT
3. ADVANTAGES OF THE PROJECT
4. APPLICATION OF THE PROJECT
5. SCOPE OF THE PROJECT
6. LIMITATION OF THE PROJECT
7. PURPOSE OF THE PROJECT
8. PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW

1. REVIEW OF THE RELATED STUDY
2. OVERVIEW OF DRILL
3. HISTORICAL BACKGROUND OF DRILIING MACHINE

CHAPTER THREE
METHODOLOGY

1. DESIGN REQUIREMENT
2. COMPONENTS USED
3. WORKING
4. DESIGN OF DRILLING
5. DESIGN CALCULATION
6. DESIGN DIAGRAM

CHAPTER FOUR
TEST AND RESULT ANALYSIS

1. CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
2. ASSEMBLING OF SECTIONS
3. TESTING OF SYSTEM OPERATION
4. RESULTS AND DISCUSSION

CHAPTER FIVE

1. CONCLUSION
2. REFERENCES

CHAPTER ONE
1.0                                                        INTRODUCTION
1.1                                           BACKGROUND OF THE STUDY
Drilling is the act of making a hole in a material using cutting equipment and can be done on the earth’s surface. Hole drilling on the earth’s surface is primarily done for several purposes, which include erection of structures, extraction of oil or planting trees. The structures erected in drilled holes include electricity poles, flag posts, masts; buildings etc [1].
Drilling for a bulk layer earth is a cutting process that uses a drill bit to cut or enlarge a hole of circular cross-section in solid materials. The drill bit is a rotary cutting tool, often multipoint. The bit is pressed against the work piece and rotated at rates from hundreds to thousands of revolutions per minute [2]. This forces the cutting edge against the work piece, cutting off chips from the hole as it is drilled.
Boring is used to achieve greater accuracy of the diameter of a hole, and can be used to cut a tapered hole. Boring can be viewed as the internal-diameter counterpart to turning, which cuts external diameters. In combine drilling and boring machine both the drilling and boring operations are done in a single phase. This is used for mass production, a great time saver where many pieces of jobs having many holes are to be drilled. It can used in mechanical industry in order to increase the productivity of machining systems [3].
In today’s market the customer demands the product of right quality, right quantity, right cost, & at right time. Therefore it is necessary to improve productivity as well as quality. One way to achieve this is by using combine machine. On the other hand, in order to meet quality requirements of final product [3].

1.2                                  PROBLEM STATEMENT
In the last decade, drilling of earth hole is performed manually and traditionally with shovel which wastes time, cost energy loss, tedious and not efficient. Due to their inefficiency, there has been need for a better way. This machine is used to drill earth layer with easy, which is fast and simple and at the same time east to operate [3][4].

1.3                                                   AIM OF THE PROJECT
The main aim of this work is to build a machine that uses a drill bit to cut or enlarge a hole of circular cross-section in solid materials.

1.4                                          ADVANTAGES OF THE PROJECT

1. With the help of this machine we can do drilling operation together in single pass.
2. Desired depth of the hole can be obtained.
3. The size of machine is smaller than the older machine so it is very simple to move it from one place to another.
4. Machine can be easily transported. The overall space required is also minimize.
5. The efficiency of this machine is better than the older machine.
6. The machine is very simple to operate.
7. No need of skilled operator for the operation.

1.5                                          APPLICATION OF THE PROJECT
The device used to drill hole for electricity poles, flag posts, masts; buildings etc. extraction of oil involves a vigorous drilling exercise of extracting oil from depths of over 800 feet. Hole drilling for Planting trees is a major activity that involves digging holes using either a drilling machine mechanism [3].

1.6                                                 SCOPE OF THE PROJECT
This machine is drilling equipment used for agriculture purpose. It can be used to drill in soil. It can be tractor operated. It consists of a frame of a cultivator, universal joint, spur gears, bearings, chain sprocket, tractor, drill bit. Frame is attached to the tractor universal joint connects the spur gears and shaft, drill bit is mounted below the frame and is connected to spur gears through chain drive. Power transmission:- tractor’s shaft- universal joint - spur gears – chain drive – drill bit [5][6].

1.7                                  PURPOSE OF THE STUDY
The main purpose of this work is make drilling of earth layer easy, fast and simple.

1.8                                                         LIMITATION OF THE PROJECT

1. It is difficult to control due to the weight of the device
2. It requires considerable muscular effort and difficult to maintain because of the difficult operative nature of the motorized drilling bit. With the hand held motorized augers, the hole drilling process is labor intensive.
3. This machine tends  to scatter dirt away from the holes being drilled by the auger, resulting in more difficult effort to pack soil around during the process
4. The movement of machine around is cumbersome.
5. The cost of machines involved is high

1.9                                                         PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study,  chapter three describes the methods applied,  chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.

CHAPTER TWO: The complete chapter two of “design and construction of bulk layer earth drilling machine” is available. Order full work to download. Chapter two of “design and construction of bulk layer earth drilling machine” consists of the literature review. In this chapter all the related work on “design and construction of bulk layer earth drilling machine"

CHAPTER THREE: The complete chapter three of “design and construction of bulk layer earth drilling machine” is available. Order full work to download. Chapter three of “design and construction of bulk layer earth drilling machine” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of design and construction of bulk layer earth drilling machine” is available. Order full work to download. Chapter four of “design and construction of bulk layer earth drilling machine” consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a “design and construction of bulk layer earth drilling machine” is available. Order full work to download. Chapter five of “design and construction of bulk layer earth drilling machine” consist of conclusion, recommendation and references.

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.

---

For more information contact us through Any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com

---

IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.