USER'S INSTRUCTIONS: The project work you are about to view is on" design and construction of dc power based emergency lighting and burglar system for four bedroom flat". Please, sit back and study the below research material carefully. This project topic (" design and construction of dc power based emergency lighting and burglar system for four bedroom flat") have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this" design and construction of dc power based emergency lighting and burglar system for four bedroom flat"project research material is to reduce the stress of moving from one school library to another all in the name of searching for" design and construction of dc power based emergency lighting and burglar system for four bedroom flat"research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF DC POWER BASED EMERGENCY LIGHTING AND BURGLAR SYSTEM FOR FOUR BEDROOM FLAT
BY
---
EE/H2013/01430
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
SCHOOL OF ENGINEERING
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work," design and construction of dc power based emergency lighting and burglar system for four bedroom flat" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on Electrical and Electronics Engineering has been approved.
By
Engr. --- Engr. ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
Engr. ---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work" design and construction of dc power based emergency lighting and burglar system for four bedroom flat" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of " design and construction of dc power based emergency lighting and burglar system for four bedroom flat" visible for everyone, then the complete material on" design and construction of dc power based emergency lighting and burglar system for four bedroom flat" is to be ordered for. Happy viewing!!!
This device does two different works. It does the work of an emergency light and also the work of burglar alarm. It consists of two different circuits the two different works. The automatic emergency light part of the device turns light ON during dark condition. Automatic Emergency Light will turn ON the emergency light only during the Dark condition. While the burglar part of the device works as a security alarm. It ensures a proper security to building against theft or intruder. The circuit uses CD4011 Cmos IC which was wired as a timing circuit, as tone generator and amplifier to obtain a maximum audible sound. The CD4011 times the circuits and also generates a tone and this tone is send to transistor which amplifies the tone generated through a loud speaker or buzzer. The aim of the device is to ensure security of lives and properties and at the same time ensure the illumination of an environment.
CHAPTER ONE
1.1 INTRODUCTION
This device Provides light when the ordinary lighting fails due to a power cut. Required especially in villages where there are long power cuts. Important to install it near stairs or the place where level changes. Near safety signs it should be installed.
The guard was also susceptible to sleep at times. It was then that home alarm system based upon electronic circuits were developed which proved to be highly reliable and were appreciated by the people as they were relieved from constant monitoring of their homes.The burglar alarm is used to ensure a proper security to building against theft or intruder. The circuit uses CD4011 Cmos IC which was wired as a timing circuit, as tone generator and amplifier to obtain a maximum audible sound. The CD4011 times the circuits and also generates a tone and this tone is send to transistor which amplifies the tone generated through a loud speaker or buzzer.
1.1 PROBLEM STATEMENT
The need for having a constant home illumination and home protection has always been there. But in the recent times, considering a dramatic rise in petty crimes like robbery and theft, the need has been more strongly felt to have a fool proof protection of the belongings and the family members. Home security has come a long way in the last few decades. It was in the hands of a guard who manually provided surveillance during nights in the earlier days, but it was not fool proof as it was only normal for him to have momentary lapse of concentration. The need for illumination is to protect the occupant of the house against stumbling. This device brought solution to this need. It gives illumination by triggering a dc powered LED lamp and also ensure adequate protection against intruders.
1.2 AIM AND OBJECTIVE
The main aim and objective of the design and construction this project is to create a comfort in the minds of house owners when they out from their premises without much fear of intruder and also automatically power the lighting system during dark time.
1.3 SIGNIFICANCE OF THE PROJECT
This device functions as an electronics watch dog. This device functions as a major security alarms used in residential, commercial, industrial, and military properties for protection against burglary (theft) or property damage, as well as personal protection against intruders.
Dc operated emergency lighting serves as a source of light to the user. It also help in energy shedding or conservation. Basically a battery packed light device. This automatically switched on when the light is switched off or there is a blackout. It is used in child’s study rooms to avoid the sudden power failure, as an emergency lamp in homes, used in security systems to switch ON the lights automatically during the power failure and Common in commercial and standard residential buildings. This device is:
- Battery Efficient
- Pollution free.
- Easy to use.
- Very cheap
1.4 APPLICATION OF THE PROJECT
Emergency light and Burglar alarms are used in residential, commercial, industrial, and military properties for illumination and protection against stumbling and burglary (theft) or property damage, as well as personal protection against intruders. Car alarms likewise protect vehicles and their contents. Prisons also use security and emergency systems for control of inmates.
1.5 SCOPE OF THE PROJECT
This circuit will help you to guard your precious documents as well as jewellery from intruders or theft. All you need is just to place this circuit in front of the locker or below the mat so when any unknown person come and walk over the switch, the circuit will trigger and sound of alarm comes. The main benefit of the circuit is that these can be implied in two places at a time as two different switches produces two different sounds.
Automatic Emergency light is often considered same as a light device running on an inverter. It is considered a device which has its one end connected to a power source and when the power supply is cut, the bulb glows with the power of inverter. emergency lighting work on the principle that when a power failure occurs in a household at night, a power failure light responds to provide emergency illumination so that the occupants may move about safely in order to take measures to restore the illumination either by changing fuses, if necessary, or by finding and deploying other light sources such as candles, portable electric lanterns, or the like.
1.6 LIMITATION OF THE PROJECT Can Be Expensive: High quality, state-of-the-art alarm systems don’t come cheap. They require substantial initial investment, which includes equipment cost, installation and subscription of security monitoring service. False Alarm: Most systems are prone to false alarms that involve the alarm going off on you, or the alarm sounding off even when there’s no emergency situation. This can be extremely embarrassing, especially when the alarm sound sounds and the authorities – show, only to find that you tried to “break” your own house.
1.7 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this works is on the introduction to this study. In this chapter, the background, significance, aim/objective limitation and problem to this study were discussed.
Chapter two is on literature review of this study. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
CHAPTER TWO: The complete chapter two of " design and construction of dc power based emergency lighting and burglar system for four bedroom flat" is available. Order full work to download. Chapter two of " design and construction of dc power based emergency lighting and burglar system for four bedroom flat" consists of the literature review. In this chapter all the related work on " design and construction of dc power based emergency lighting and burglar system for four bedroom flat" was reviewed.
CHAPTER THREE: The complete chapter three of " design and construction of dc power based emergency lighting and burglar system for four bedroom flat" is available. Order full work to download. Chapter three of " design and construction of dc power based emergency lighting and burglar system for four bedroom flat"consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of " design and construction of dc power based emergency lighting and burglar system for four bedroom flat" is available. Order full work to download. Chapter four of " design and construction of dc power based emergency lighting and burglar system for four bedroom flat" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a " design and construction of dc power based emergency lighting and burglar system for four bedroom flat" is available. Order full work to download. Chapter five of " design and construction of dc power based emergency lighting and burglar system for four bedroom flat" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.
For more information contact us through Any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
Watsapp No :+2348146561114
To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.