USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of door security system using remote control and sensors". Please, sit back and study the below research material carefully. This project topic (design and construction of door security system using remote control and sensors) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of door security system using remote control and sensors" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of door security system using remote control and sensors" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, "design and construction of door security system using remote control and sensors" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "design and construction of door security system using remote control and sensors" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of ""design and construction of door security system using remote control and sensors visible for everyone, then the complete material on "design and construction of door security system using remote control and sensors" is to be ordered for. Happy viewing!!!

---

The ultimate purpose of this paper is to develop a remote controlled security door using a microcontroller. It is a means of enforcing security features of the entire building structure, equipped with appropriate management control. In this paper we have designed system that allows unlocking a secure door remotely. The main aim of this paper is to help users improve the door security of sensitive locations, from car parks, shopping centres or corporate head offices to airports, banks or nuclear power plants. This paper takes a cursory look at other security methods of controlling access, their disadvantages and then goes on to the design of the hardware as well as software programming to lock or unlock the door. Both software and hardware for the system were developed in this paper by using arduino microcontrollers, relays, sensors, induction motors and some mechanical system to demonstrate the response of the output and input devices.

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1   BACKGROUND OF THE PROJECT

• PROBLEM STATEMENT
• AIM AND OBJECTIVE OF THE PROJECT
• SCOPE OF THE PROJECT
• APPLICATION OF THE PROJECT
• LIMITATION OF THE PROJECT
• DEFINITION OF TERMS

CHAPTER TWO
LITERATURE REVIEW

• REVIEW OF RELATED WORKS
• REVIEW ON LOCKS
• STRENGTHS AND WEAKNESSES

CHAPTER THREE
METHODOLOGY

• INTRODUCTION
• HARDWARE DESIGN
• SYSTEM BLOCK DIAGRAM
• SYSTEM FLOW CHART
• SYSTEM CIRCUIT DIAGRAM
• PROGRAM CODE

CHAPTER FOUR
TESTING AND RESULTS

• CONSTRUCTION PROCEDURE AND TESTING
• INSTALLATION OF THE COMPLET DESIGN 
• CASING AND PACKAGING
• ASSEMBLING OF SECTIONS
• TESTING OF SYSTEM OPERATION
• RESULT
• DISCUSSION

CHAPTER FIVE

• SUMMARY
• CONCLUSION
• RECOMMENDATION
• REFERENCES

CHAPTER ONE
1.0                                                            INTRODUCTION
1.1                                               BACKGROUND OF THE STUDY
Due to the need to increase the security of life and properties in our environment, security systems are used as selective systems to decide who have access to a given location based on a personal distinctive trait of the user. It also serves the function of sensing or detecting false intrusion (using input sensory devices and gives early warning using audio warning devices alarm – light indicators and remotely controlled computer systems etc). The term false intrusion here is used to mean any form of attempt to gain entry without following the proper pre- designed protocol(s). From time past until present, security locks usually includes mechanical devices made of forged metal i.e. simple lock and bolt, the door chain, pin tumbler lock, the jam lock and padlock etc. Other recently developed security devices are gadgets like laser beam detectors, motion detectors and magnetic card readers. Most recent of these devices are offshoots of biometric engineering. They include voice recognition systems, finger print readers, retina eye scanners, etc. (Prabhakar, 2003). The major characteristic of security devices is to prevent an intruder from gaining access to a location. Most of these devices however have lapses which give an unauthorized person access to where they are barred i.e. the simple jam lock and pad lock can be forced open or the keys duplicated by unauthorized persons and under certain conditions, i.e. physical changes of the individual concerned, the biometric devices sometimes fail in recognizing the authentic individual concerned (Matyás, 2012). Hence they cannot be totally relied on. Furthermore, these devices are very expensive (Chien, 2011), its use is restricted to only a few individuals or organizations that can afford it. Biometric systems may violate users privacy while some users consider them to be personally invasive and may also imply loss of anonymity (Matyás et al., 2012). Devices such as motion detectors, light detectors among others are susceptible to be triggered by false signals such as noise impulses, whenever its sensitivity is increased (Matyás et al., 2012). They are not suitable for most outdoor security protection due to the fact that they don’t posses high discriminative capability during operation and they are fairly expensive.
It is hence imperative to provide a security door, one which is also efficient and reliable; with high discriminative capability, non reliance on the physical quality of the individual concerned does not have key access or any physical locking interface and which is by far less expensive than their counterparts (Alsaadi, 2015). This has led to the design and construction a remote control security door using microcontroller. It includes remote control and using correct personal identification numbers to operate the locking device manually, by conditioning the access based on the configuration of the security device thereby granting access to the user with correct pin number.
The remote control security door finds application in homes, banks in the field of military applications i.e. ammunition ware house, industries and ministries and Government Parastatals, airports nuclear power plants etc.
There are three important components of access control: Identification, Authentication, and Authorization. Identification is the activity of the subject supplying information to identify itself to an authentication service. Authentication is the second part of a credential set to verify the identity of the subject. These mechanisms could be passphrases, passwords, cryptographic keys, PIN numbers, or tokens. Authorization is the process of determining what this identified subject can actually access and what operations it can carry out (Mahdi, 2013).
1.2     Problem statement
The security situation in many parts of the world today leaves much to be desired. In Nigeria particularly, the prevalence of armed robbers and other groups that constitute nuisance to the society has led to the loss of lives and properties worth millions of dollars. Many of the attacks that led to the loss have occurred in the homes or in guarded compounds and the attacks took place in spite of the existence of seemingly impregnable security gates that were designed to ward off intruders. The needs for remote controlled gates that have superior security features to those operated manually thus exist and have been on the increase in recent times.
1.3      Aim and objectives of the study
The main aim of this work is to build a remote control door Lock Circuit for safety purposes. The objectives of this work are:

• To improve security in our homes and industries
• To replace metallic keys by building a fully featured remote enabled electronic security system prototype
• To study the workings of an infrared sensor

1.4   Scope of the study
The scope of this work covers the building of a Remote control Door Lock Circuit for safety purposes. Remote Control Door Locks allow Wireless Control. This means one can unlock or lock their doors with just one click from remote control. It replaces the traditional lock system and provides a modern lock that is way more secure.
Arduino microcontroller is used making this circuit. Electromagnetic door lockwas used in building the device. The Magnetic locks use electromagnetism to deal with the entire locking mechanism. The circuit is easy to build and simple to use required few electronic components.

1.5     Applications of the scope

• We can use it in industries, homes, offices for the security purpose.
• Safety devices.
• Home automation system

1.6                                          LIMITATIONS OF THE PROJECT

It is a low range circuit, i.e. it has limited coverage.

• If there is no power supply and the battery is not charged, it is not possible to open the door.
• IR Transmitter and Receiver require line of sight communication i.e. they need to be facing each other.
• The range of IR communication is less and is reliable for short range and small amounts of data.

1.7                                                  DEFINITION OF TERMS
Secure Area: A designated area in which access into and out of is controlled and can be monitored.
Secure Door: A door in which access through is controlled and can be monitored.
Short Circuit: An unintentional connection that provides a low resistance path between two points in a circuit or between a point in a circuit and ground. A Short Circuit can drastically affect the operation of a circuit. If excessive current flow results from the Short Circuit, a device may be damaged or ruined.
Switch: A device used to either connect or interrupt an electronic circuit.

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of door security system using remote control and sensors" is also available. Order full work to download. Chapter two of "design and construction of door security system using remote control and sensors" consists of the literature review. In this chapter all the related works on "design and construction of door security system using remote control and sensors" were reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of door security system using remote control and sensors" is available. Order full work to download. Chapter three of "design and construction of door security system using remote control and sensors" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of door security system using remote control and sensors" is available. Order full work to download. Chapter four of "design and construction of door security system using remote control and sensors" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of door security system using remote control and sensors" is available. Order full work to download. Chapter five of "design and construction of door security system using remote control and sensors" consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

Visit the link below to see our recent works, and SUBSCRIBE to receive notification for our electronics teachings and practicals.

https://www.youtube.com/channel/UChY9Z1-egigJbYjYnapd0nw

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: