DESIGN AND CONSTRUCTION OF DOT MATRIX DISPLAY PROGRAMMABLE USING GSM (ANDROID)
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of dot matrix display programmable using gsm (android)". Please, sit back and study the below research material carefully. This project topic (design and construction of dot matrix display programmable using gsm (android)) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of dot matrix display programmable using gsm (android)" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of dot matrix display programmable using gsm (android)" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of dot matrix display programmable using gsm (android)" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of dot matrix display programmable using gsm (android)" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of dot matrix display programmable using gsm (android)" visible for everyone, then the complete material on "design and construction of dot matrix display programmable using gsm (android)" is to be ordered for. Happy viewing!!!
This work is on “GSM Based Dot Matrix Display” which can be used by institution, organization or any commercial establishment to display new event or activity to the public. It utilizes GSM, LED and microcontroller to display information.
Hence, this project aims at achieving the above purpose using GSM module which can feed the message dynamically. There is one particular advantage of using GSM Modem in this project. Since this involves SMS, the user can display message of choice even he/she is at any given place via bluetooth.
GSM Based Dot Matrix Display is an automated microcontroller electronic system which scrolls text on an LED board, the message to be displayed can be dynamically changed using GSM module to which the user sends an SMS. The user also gets an acknowledgement in form of SMS on successfully displaying the text. In this project the first line of the message displays steadily while the second line of the messages moves and it is also editable.
When the user sends a text to be displayed via SMS, GSM module receives via Bluetooth and transfers the text to microcontroller. The code in microcontroller converts each character in the text into a 2 Dimensional array of 1’s and 0’s. The array size depends on the size of the LED matrix being used on the LED display board. These 1’s and 0’s are fed to LED driver circuit, which does its own unique role. If the message is successfully displayed, the microcontroller sends a confirmation SMS to the user through GSM bluetooth.
In conclusion, this microcontroller based displaying of text on LED matrices board is advantageous, not to mention low cost, by providing dynamic yet simple and flexible aid to institutions, organizations or commercial establishments to display and scroll texts. The scope of application of this project can be expanded by the choice of the user. Our project is a modest prototype of integrating GSM Based Dot Matrix Display
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
- INTRODUCTION
- BACKGROUND OF THE PROJECT
- PROBLEM STATEMENT
- AIM AND OBJECTIVE OF THE PROJECT
- SCOPE AND LIMITATION OF THE STUDY
- BENEFIT OF THE PROJECT
- SIGNIFICANCE OF THE STUDY
- METHODOLOGY
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- REVIEW OF RELATED STUDIES
- HISTORICAL BACKGROUND OF BILLBOARDS
- GENERAL USE OF BILLBORAD
- REVIEW OF THE EFFECTS OF THE PROJECT
- REVIEW OF ELECTRONIC BILLBOARD REGULATIONS
CHAPTER THREE
METHODOLOGY
- INTRODUCTION
- SYSTEM BLOCK DIAGRAM
- DESCRIPTION OF SYSTEM HARDWARE
- SYSTEM FLOW CHART
- SYSTEM SOFTWARE
- PROGRAMING
- SYSTEM DESCRIPTION AND OPERATION
- POWER SUPPLY
CHAPTER FOUR
- TEST AND RESULT ANALYSIS
- COMPONENTS ASSEMBLY
- CIRCUIT CONSTRUCTION TECHNIQUES
- SELECTION OF COMPONENTS
- STEP-BY-STEP-METHOD
- CONSTRUCTION ON VEROBOARD
- SOLDERING TECHNIQUES
- TESTING/COUPLING
- TIPS ON MAINTENANCE OF THE PROJECT
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Over the last few years, the GSM cellular phone has grown from a luxury item owned by the rich to something so common that one out of five people already owns one. This is amazing when we look at the fact that our country is a developing one with almost half our population living below the poverty line. This continuously growing popularity of the GSM cell phone has spurred the growth of the country’s cellular network infrastructure. The primary reason we can see for this tremendous and unexpected cellular boom is the popularity of the short message service (SMS). A variety of services have grown around SMS.
The GSM Based Dot Matrix Display is aimed at the universities for displaying day-to-day information continuously or at regular intervals during the working hours. Being GSM-based system, it offers flexibility to display flash news or announcements faster than the programmable system (Umesh et al, 2013). GSM Based Dot Matrix Display can also be used at other public places like schools, hospitals, railway stations, gardens etc. without affecting the surrounding environment. The led display system mainly consists of a GSM receiver and a display toolkit which can be programmed from an authorized mobile phone. It receives the SMS, validates the sending Mobile Identification Number (MIN) and displays the desired information after necessary code conversion. It can serve Mobile Identification Number (MIN) and displays the desired information after necessary code conversion It can serve as an electronic notice board and display the important notices instantaneously thus avoiding latency. Being wireless, the GSM Based Dot Matrix Display is easy to expand and allows the user to add more display units at anytime and at any location in the campus depending on the requirement of the institute.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of dot matrix display programmable using gsm (android)" is also available. Order full work to download. Chapter two of "design and construction of dot matrix display programmable using gsm (android)" consists of the literature review. In this chapter all the related works on "design and construction of dot matrix display programmable using gsm (android)" were reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of dot matrix display programmable using gsm (android)" is available. Order full work to download. Chapter three of "design and construction of dot matrix display programmable using gsm (android)" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of dot matrix display programmable using gsm (android)" is available. Order full work to download. Chapter four of "design and construction of dot matrix display programmable using gsm (android)" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of dot matrix display programmable using gsm (android)" is available. Order full work to download. Chapter five of "design and construction of dot matrix display programmable using gsm (android)" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
Visit the link below to see our recent works, and SUBSCRIBE to receive notification for our electronics teachings and practicals.
https://www.youtube.com/channel/UChY9Z1-egigJbYjYnapd0nw
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No
:+2348146561114
Email Address
:engr4project@gmail.com
FOLLOW / VISIT US VIA: