phonelogo+234 8146561114 or +2347015391124

DESIGN AND CONSTRUCTION OF ELECTRONIC SCROLLING MESSAGE DISPLAY BOARD WITH BACK UP BATTERY

USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of electronic scrolling message display board with back up battery". Please, sit back and study the below research material carefully. This project topic (design and construction of electronic scrolling message display board with back up battery) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of electronic scrolling message display board with back up battery" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of electronic scrolling message display board with back up battery" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018



APPROVAL PAGE

This is to certify that the research work, "design and construction of electronic scrolling message display board with back up battery" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work "design and construction of electronic scrolling message display board with back up battery" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of ""design and construction of electronic scrolling message display board with back up battery visible for everyone, then the complete material on "design and construction of electronic scrolling message display board with back up battery" is to be ordered for. Happy viewing!!!


ABSTRACT

This report is aimed at explaining the Design and Construction of electronic message display board. It enumerate why we need electronic scrolling message display which is primarily for passage of information across the staff, students and public. It also includes the aim and objectives, advantages and disadvantages with a well narrated literature review and timeline that relates to digital display and its current trends in digital world.
Adequate coverage was given to mode of operation, result and discussion on the project work including Conclusion, Recommendations for further study, Bill of Engineering Measurement and Evaluation (BEME) and Reference.             

 

 

 

 

TABLE OF CONTENTS
Title Page…………………………………………………………………i
Certification……………………………………………………….......ii
Abstract…………………………………………………………………iii
Dedication……………………………………………………………..iv
Acknowledgements……………………………………………..…….v
Table of Content………………………………………....................vi-ix
List of figures………………………………………………………….x-xi
CHAPTER ONE

    1.  Introduction…………………………………………................1
    2. Problem Statement ………………………………………….
    3. Motivation……………………………………………….............
    4. Aim……………………………………………………………………..
    5. Objectives……………………………………………………………
    6. Research Methodology…………………………………………….

CHAPTER TWO
2.0 Literature Review………………………………………………10
2.1 Traditional/Conventional Billboards……………………………….
2.2 Billboard Advertising………………………………………………
2.3 Digital Signals………………………………………….18-19
2.4 DIGITAL BILLBOARD
2.5     ELECTRONIC LED BILLBOARDS

 

CHAPTER THREE
3.0   System Design, Methodology and Circuit Analysis
3.1     System Design.
3.2  THE HARDWARE SECTION.
3.2.1  THE POWER SUPPLY UNIT.
3.2.1.1        LM7805 VOLTAGE REGULATOR.
3.2.2  THE INPUT UNIT.
3.2.2.1        MAX232.
3.2.2.2        RS-232.
3.2.3  THE CONTROL UNIT.
3.2.3.1        THE AT89C51 MICROCONTROLLER.
3.2.3.2.1     MEMORY ORGANIZATION
3.2.3.2.4     REGISTER BANKS.
3.2.4  DISPLAY UNIT.
3.2.4.1        LIGHT EMITTING DIODES (LEDS).
3.2.4.2        LED-Display-Unit-Module
3.3     DESIGN DATA AND CALCULATION.
3.4     SOFTWARE/FIRWARE DESIGN SECTION.
3.5              HOW THE ENTIRE SYSTEM SEND DATA INPUT INTO   MICROCONTROLLER.
3.6     HOW THE MICRO CONTROLLER WORK WITH THE ENTIRE SYSTEM

CHAPTER FOUR
4.0 System Implementation, Testing and Result.
4.1 System Implementation.
4.1.1 HARDWARE IMPLEMENTATION
4.1.2  SOFTWARE/FIRMWARE IMPLEMENTATION
4.2     TESTING
4.3     RESULT (THE PERFORMANCE ANALYSIS).

 

CHAPTER FIVE
5.0 Conclusion………………………………………………………….54
5.1 Recommendation………………………………………………….54
5.2 Bill of Engineering Measurement and Evaluation(BEME)………………………………………............56
5.3 Reference………………………………………………………….57
Appendix………………………….. ..........................................58-59

 

 

 

 

 

 

 

 

LIST OF FIGURES
Fig 2.1 Street lightning system………………………………………..13 Fig 2.2 Control switch…………………………………………………..14
Fig 2.3.1 Circuit diagram of dark activated relay switch……….15
Fig 2.3.2 Manual switch……………………………………………….16
Fig 2.7.1 Distribution board………………………………………….22
Fig 2.7.2 Circuit breaker………………………………………………22
Fig 3.1.1 (a) 4 Core by 6mm2 cable…………………………………24
(b) Earth Leakage Circuit Breaker (ELCB)
(c) Streetlight fittings              
(d) Electric pole……………………………………………24
Fig 3.1.2 (a) Plumb  …………………………………………………..25
(b) Measuring tape  
(c) Shovel……………………………………………………25
Fig 3.1.3 (a) Iron frame and wooden base frame………………..26
(b) Round pipe
(c) Cement              
(d) Sharp sand & Gravel………………………………..26
Fig 3.3.1  Choke……………………………………………………….29
Fig 3.3.2 Discharge lamp…………………………………………….30
Fig 3.3.3 Ignitor……………………………………………

                                                CHAPTER ONE
1.1     INTRODUCTION
Communication has become inevitable and vital thing in this present age, it is even believed to be a commodity meant for consumption by any targeted audience. One of the important qualities possessed by all animals is the ability to communicate with each other or one another at a given time.
An information display is a way of providing information and is used as an object for notification. It can be used for both indoor and outdoor which makes it universal fit for any form of alerts.
The extent of development in information dissemination has made it possible that the well known method of displaying information using sign posts, placards, notice boards, etc has to be modified by using electronic information board.
In the previous years, the means by which adverts, information are display has been through the use of static mode of sign display such as banners, flyers etc, they are becoming boring and unattractive.
Electronic scrolling message display advertisements are designated to catch a people’s attention and create a memorable impression very quickly, leaving the reader thinking about the advertisement after they have driven past it. They have to be readable in a very short time because, they are usually read while being passed at high speeds.
This piece of digital technology can be found in a number of places and are being used for different purposes.
In banks, it is used to display interest rates as well as exchange rates. In hotels and pubs, it is used to display the menu and prices, in schools it is used to display information related to the school programme and update news
1.2     MOTIVATION
The motivation of this project comes from the change involved with information in respect to time this days now prompt the huge step of constructing a reprogrammable SCROLLING MESSAGED DISPLAYER OR MOVING MESSAGE DISPLAYER to give information about anything at a particular moment to the targeted audience and need to know how electronic billboards can at least provide some improved measures to the limitations of conventional billboards listed in the problem statements. The astonishing and spectacular display of an electronic display is as well a source of inspiration.

 

1.3     AIM OF THE PROJECT.
To design and construct an outdoor-scrolling message display
1.4     OBJECTIVES OF THE PROJECT WORK

  1. To design and construct an electronic display board with back-up battery which can be used to pass across information such as emergence phone contacts  in form of scrolling message to staff, students and general public within the school premises.
  2. To know the various electronic components that makes up an electronic billboard.
  3. To design and construct an electronic message displayer with backup battery that will serves as a link of communication within the school premises
  4. To have practical knowledge on how these electronic components are interface and controlled to achieve the desired results.
  5. To develop and implement how a microcontroller can be interface with a LED dot matrix display board
  6. To have a good knowledge and understanding of the software/firmware needed to control the hardware section.
  7. To acquire more knowledge about digital world.

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of electronic scrolling message display board with back up battery" is also available. Order full work to download. Chapter two of "design and construction of electronic scrolling message display board with back up battery" consists of the literature review. In this chapter all the related works on ""design and construction of electronic scrolling message display board with back up battery were reviewed.

CHAPTER THREE: The complete chapter three of ""design and construction of electronic scrolling message display board with back up battery is available. Order full work to download. Chapter three of "design and construction of electronic scrolling message display board with back up battery" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of ""design and construction of electronic scrolling message display board with back up battery is available. Order full work to download. Chapter four of ""design and construction of electronic scrolling message display board with back up battery consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of electronic scrolling message display board with back up battery" is available. Order full work to download. Chapter five of "design and construction of electronic scrolling message display board with back up battery" consist of conclusion, recommendation and references.

 

CLICK HERE FOR MORE RELATED TOPICS/MATERIAL


To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions


For more information contact us through any of the following means:

Mobile No phonelogo:+2348146561114 or +2347015391124 [Mr. Innocent]

Email address emailus:engr4project@gmail.com

Watsapp No whatsapp.html :+2348146561114

Visit the link below to see our recent works, and SUBSCRIBE to receive notification for our electronics teachings and practicals.
https://www.youtube.com/channel/UChY9Z1-egigJbYjYnapd0nw


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp Nowhatsapp.html
:+2348146561114


E
mail Address emailus:engr4project@gmail.com


FOLLOW / VISIT US VIA:

tweeter instagram.htmlfacebook logomyyoutubelogo.html