+234 8146561114 (MTN) or
+2347015391124 (AIRTEL)

DESIGN AND CONSTRUCTION OF EXCLUSIVE SINE WAVE GENERATOR

USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of exclusive sine wave generator" Please, sit back and study the below research material carefully. This project topic "design and construction of exclusive sine wave generator" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of exclusive sine wave generator " project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of exclusive sine wave generator " research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

DESIGN AND CONSTRUCTION OF EXCLUSIVE SINE WAVE GENERATOR

BY

---
EE/H2013/01430
DEPARTMENT OF ---
SCHOOL OF --
INSTITUTE OF ---

DECEMBER,2018



APPROVAL PAGE

This is to certify that the research work, "design and construction of exclusive sine wave generator" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a B.Sc on --- has been approved.

By
Dr. ---                                                    Dr. ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
 Dr. ---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work “design and construction of exclusive sine wave generator ” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” visible for everyone, then the complete material on “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” is to be ordered for. Happy viewing!!!


ABSTRACT

This work is on a Sine wave generator which is an electronic equipment that provides standard test signals of sinewave. It is also called an oscillator, since it produces periodic signals. This work describes the operational amplifier (op-amp) sine-wave oscillator, together with the criteria for oscillation to occur using RC components. It delineates the roles of phase shift and gain in the circuit and then discusses considerations of the op amp. A brief analysis of a Wien-Bridge oscillator circuit is provided. Several examples of sine-wave oscillators are given, although it is recognized that there exist many additional types of oscillator to which the principles of this application note also apply. 

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE

    1. INTRODUCTION
    2. BACKGROUND OF THE PROJECT
    3. PROBLEM STATEMENT
    4. OBJECTIVE OF THE STUDY
    5. SCOPE OF THE PROJECT
    6. SIGNIFICANCE OF THE PROJECT
    7. APPLICATION OF THE PROJECT
    8. LIMITATION OF THE PROJECT
    9. METHODOLOGY
    10. PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW

    1. OVEVIEW OF THE STUDY
    2. SINE-WAVE OSCILLATOR DEFINED
    3. REQUIREMENTS FOR OSCILLATION
    4. PHASE SHIFT IN THE OSCILLATOR
    5. GAIN IN THE OSCILLATOR

CHAPTER THREE
3.0          METHODOLOGY

    1. BLOCK DIAGRAM
    2. CIRCUIT DIAGRAM
    3. DESIGN ANALYSIS

CHAPTER FOUR
4.0      RESULT ANALYSIS

    1. CONSTRUCTION PROCEDURE AND TESTING
    2. CASING AND PACKAGING
    3. ASSEMBLING OF SECTIONS
    4. TESTING OF SYSTEM OPERATION

CHAPTER FIVE

    1. CONCLUSION
    2. RECOMMENDATION
    3. REFERENCES

CHAPTER ONE
1.0                                                        INTRODUCTION
1.1                                           BACKGROUND OF THE STUDY
A sine wave is a geometric waveform that oscillates (moves up, down or side-to-side) periodically, and is defined by the function y = sin x. In other words, it is an s-shaped, smooth wave that oscillates above and below zero.
Sine waves are used in technical analysis and trading to help identify patterns and cross-overs related to oscillators.
The sine wave is important in physics because it retains its wave shape when added to another sine wave of the same frequency and arbitrary phase and magnitude. It is the only periodic waveform that has this property.
A sine wave is a wave whose form resembles a sine curve. Often in power electronics, we need a sine wave generator for some applications; a dc/ac power inverter, for example. Here is a simple attempt to fill a niche that seems to be lacking in the power inverters world — one for which a fairly efficient, inexpensive “inverter heart” offers a pure sine wave output. Utilizing pulse-width modulation and analog components, the output will be a clean sinusoid with very little switching noise. Note that pure sine wave inverters are able to simulate precisely the ac power that is delivered by a conventional wall outlet.

1.2                                                  PROBLEM STATEMENT
Because of the disadvantage noticed when using other form of waves such as the fact that peak voltages usually varies with the voltage of the battery and can cause electronic devices to behave erratically because of power surges and loses power during conversion process. Because of these disadvantages led to the invention of sine wave generator which overcomes all these problems.

1.3                                             OBJECTIVE OF THE PROJECT
The main aim of this work is to construct a sine wave generator circuit with minimum distortion.

1.4                                                 SCOPE OF THE PROJECT
The Sine Wave Generator is an excellent tool for generating waves with speakers or wave drivers. It allows both the frequency (1-800 Hz) and amplitude of the sine wave output to be varied. Both fine and coarse frequency controls are included and the digital display features a 0.1 Hz resolution. In addition, the generator can "learn" the fundamental frequency for a particular configuration.

1.5                                        SIGNINFICANCE OF THE PROJECT
This study exposes us to the uses of sine wave in power supply system such as: AC power sources provide clean, regulated power that is identical to or even better than the power supplied by your local utility company – as compared to “modified sine wave” or “square wave” products, which all provide a fluctuating output voltage that is suitable for powering only a limited selection of loads.
If one wants to run equipment exactly to the manufacturer’s specifications, you must use a power source with a pure sine wave output. With pure sine wave, motor loads start easier and run cooler due to the reduced harmonics associated with the pure sine wave shape. In fact, some equipment will operate properly only from a true sine wave source: Some examples include laser and motor driven printers, variable speed motors, medical equipment, and any equipment deriving timing signals from the input.
All AC appliances and equipment are designed to run off of a pure sine wave.  Pure sine wave energy is the type of power that is produced by your local utility company.
Output voltage wave form is pure sine wave with very low harmonic distortion and clean power like utility-supplied electricity.
Inductive loads like microwave ovens and motors run faster, quieter and cooler.
Reduces audible and electrical noise in fans, fluorescent lights, audio amplifiers, TV, Game consoles, Fax, and answering machines.
Prevents crashes in computers, weird print out, and glitches and noise in monitors.
Reliably powers the following devices that will normally not work with modified sine wave inverters:

1.6                                          APPLICATION OF THE PROJECT
This device is used to produce sine wave signal or output which can be use to operate devices such as: Inverter, Ups, Solar inverters, Laser printers, photocopiers, magneto-optical hard drive, Certain laptop computers etc.

1.7                                           LIMITATION OF THE PROJECT
Producing sine wave signal is not cheap and easy compare to other types of waves.

1.8                                                        METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

  1. Study of the previous work on the project so as to improve it efficiency.
  2. Draw a block diagram.
  3. Test for continuity of components and devices,
  4. Design and calculation for the device was carried out.
  5. Studying of various component used in circuit.
  6. Construction of the circuit was carried out.
  7. Finally, the whole device was cased and final test was carried out.

1.9                                                         PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study,  chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.

CHAPTER TWO: The complete chapter two of “design and construction of exclusive sine wave generator” is available. Order full work to download. Chapter two of “design and construction of exclusive sine wave generator” consists of the literature review. In this chapter all the related work on “design and construction of exclusive sine wave generator "

CHAPTER THREE: The complete chapter three of “design and construction of exclusive sine wave generator ” is available. Order full work to download. Chapter three of “design and construction of exclusive sine wave generator” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of exclusive sine wave generator ” is available. Order full work to download. Chapter four of “design and construction of exclusive sine wave generator” consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a “design and construction of exclusive sine wave generator ” is available. Order full work to download. Chapter five of “design and construction of exclusive sine wave generator” consist of conclusion, recommendation and references.



To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.


For more information contact us through Any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No
:+2348146561114

E
mail Address :engr4project@gmail.com


CLICK HERE FOR MORE RELATED TOPICS/MATERIAL

IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.