DESIGN AND CONSTRUCTION OF HOME AUTOMATION SYSTEM USING ESP 32
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of home automation system using esp 32". Please, sit back and study the below research material carefully. This project topic "design and construction of home automation system using esp 32" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of home automation system using esp 32" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of home automation system using esp 32" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
APPROVAL PAGE
This is to certify that the research work, "design and construction of home automation system using esp 32" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of home automation system using esp 32" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of home automation system using esp 32" visible for everyone, then the complete material on "design and construction of home automation system using esp 32" is to be ordered for. Happy viewing!!!
This project is on a home automation system using ESP32. This work is aimed at building a circuit for Home Automation using ESP32. ESP32 is a low-power and low-cost microcontroller board which has a built-in WiFi and a dual-mode Bluetooth module.
Method: The device was first built on a breadboard which is later transfer to vero board and soldered.
Result: The device was completely build and coupled, the result during the test shows that the device was able to respond to its operation - it was able to control home appliances wirelessly.
Conclusion and Recommendation: At the end of this project – home automation using ESP32, this device was built and tested. This type of device is important because there are times when the home owners will not be around and the need to control appliances will arise. I recommend that device should be modify to control more four appliances.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- BACKGROUND OF THE PROJECT
- PROBLEM STATEMENT
- AIM/OBJECTIVE OF THE PROJECT
- SCOPE OF THE PROJECT
- LIMITATIONS OF THE PROJECT
CHAPTER TWO
2.0 LITERATURE REVIEW2.1 HISTORICAL BACKGROUND OF THE STUDY
2.2 THEORITICAL FRAMEWORK
2.3 REVIEW OF RELATED STUDIES
CHAPTER THREE
3.0 MATERIAL AND METHOD
3.1 MATERIALS USED
3.2 METHOD
3.3 DESCRIPTION OF MAJOR COMPONENTS USED
3.4 CHALLENGES AND CONSTRAINTS
CHAPTER FOUR
4.0 RESULT AND DISCUSSION
4.1 RESULT
4.2 BILL OF ENGINEERING AND MANAGEMENT EVALUATION
4.3 DISCUSSION
CHAPTER FIVE
5.1 SUMMARY
5.2 CONCLUSIONS
5.3 RECOMMENDATION
5.4 REFERENCES
APPENDIX
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
As technology developing faster, researchers are taking it as an advantage to implement new intelligent systems or enhancing the existing systems. Home automation system or smart home systems are getting more popularity in recent days. These home automation systems are enhancing by changing existing features like communication medium or features day to day.
Home automation systems enable users to control and monitor every home appliance from remote places. Many wireless technologies have introduced and enhanced in implementation of home automation systems in recent days. The available wireless technologies infrared, Bluetooth, ZigBee, Wi-Fi, RFID and GSM are used to develop a commercially viable smart home systems.
This system is a combination of ESP32, relays and power supply unit. So this system is cost effective, secure and reliable.
1.2 PROBLEM STATEMENT
Most homes make use of many electrical and electronics appliances such as the television set, standing fan, ceiling fan, air conditioner, lighting bulbs, video players, radio, etc. All these appliances require switching to turn on and turn off these appliances traditionally. This manual switching of any home appliance is an inconvenient method for physically disabled or elderly or even for the young and busy individuals when frequent switching operation is required. Thus, an easier method of switching is developed to replace this manual switching method, using an advanced switching method for electronic home appliances – ESP32. This involves using ESP32 module to switch ON and OFF of home appliances.
1.3 AIM AND OBJECTIVES OF THE PROJECT
The main aim of this project is to build a home automation system using ESP 32. The objectives of the work are:
- To build the system prototype
- To enable users to remotely control their home appliances and systems using a ESP32 module -based interface.
- To apply internet of things (IoT) in our homes
1.4 SCOPE OF THE PROJECT
This device allows for a user to remotely control and monitor multiple home appliances using a ESP 32 Wifi module. This system will be a powerful and flexible tool that will offer this service at any time, and from anywhere with the constraints of the technologies being applied. Possible target appliances include (but are not limited to) climate control systems, security systems, and lights; anything with an electrical interface.
The following is a list of limitations for the project.
Only devices with electrical controlling input ports will be possible targets for control.
The receiver must have a power source (220vac) attached at all times.
There must be a connection between the system ESP32 module and phone wifi.CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of home automation system using esp 32" is also available. Order full work to download. Chapter two of "design and construction of home automation system using esp 32" consists of the literature review. In this chapter all the related work on "design and construction of home automation system using esp 32" was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of home automation system using esp 32" is available. Order full work to download. Chapter three of "design and construction of home automation system using esp 32" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of home automation system using esp 32" is available. Order full work to download. Chapter four of "design and construction of home automation system using esp 32" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of "design and construction of home automation system using esp 32" is available. Order full work to download. Chapter five of "design and construction of home automation system using esp 32" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
