DESIGN AND CONSTRUCTION OF IOT BASED VEHICLE MONITORING AND REPORTING SYSTEM
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of iot based vehicle monitoring and reporting system". Please, sit back and study the below research material carefully. This project topic "design and construction of iot based vehicle monitoring and reporting system" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of iot based vehicle monitoring and reporting system" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of iot based vehicle monitoring and reporting system" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
APPROVAL PAGE
This is to certify that the research work, "design and construction of iot based vehicle monitoring and reporting system" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of iot based vehicle monitoring and reporting system" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of iot based vehicle monitoring and reporting system" visible for everyone, then the complete material on "design and construction of iot based vehicle monitoring and reporting system" is to be ordered for. Happy viewing!!!
Although many traffic laws are introduced, we still don’t see any fall in traffic rule violations or death caused by such negligence. The factors causing such failure can either be people or the system. So to solve this issue we propose in this paper a device using Arduino Uno that will monitor each vehicle individually with the help of sensors and modules, that it is attached on and will store data of speed violation and impact or crash along with the location and time. The device when in the range of receivers (attached to signals) on any junctions will send data to receiver devices. This data then will be uploaded to a centralized database using IOT without any human interaction.
CHAPTER ONE
1.1 INTRODUCTION
With increase in population we are facing an increase in traffic related problems such as over speeding, accidents, hit and run, and so on. With the current system in force, that is, traffic police the problem is still not curbed. There are hardly any action taken on masses that violate rules daily, most of which goes unnoticed due to negligence by either traffic police or by the people themselves. So we are proposing in this paper out device that will monitor each vehicle for its over speeding and crash and store the data locally. But the problem now comes is that no one will voluntarily allow their vehicle to send the data simply by not enabling data service to send that stored data. So what I propose is to build this system over IOT, where the data stored in the local storage of the device will be passed to a receiver that will forward this data to a centralized database over the Internet. Each traffic signals will we equipped with a receiver that will receive data from each vehicle from a particular direction, i.e., the receiver will only collect data from the device that is waiting on that particular side of the road. These receivers are connected to internet and will pass the collected data to a centralized database.
1.2 BACKGROUND OF THE PROJECT
The Internet of Things (IoT) is an arrangement of interrelated computing gadgets, mechanical and digital machines, objects, animals or individuals that are given one kind of an identifiers and the capacity to exchange information over a system without requiring human-to-human or human-to-PC communication. IoT is a new concept that has evolved from the convergence of wireless technologies. Wireless communication is the transfer of information or signal between two or more points that are not connected by an electrical conductor. In IoT devices equipped with Wi-Fi allow the machine-to- machine communication.
Using this from of industrial machines to wearable or wireless devices, using built-in sensors to gather data and take action on that data across a network. The sensor and actuator can be setup in different place but they are working together over an internet network.
Using IoT technique a vehicle tracking system (VTS) can be built. A vehicle tracking system combines the use of automatic vehicle location of individual vehicles with software that collects these fleet data for a comprehensive picture of vehicle locations. Modern vehicle tracking systems commonly use GPS or GLONASS technology for locating the vehicle, but other types of automatic vehicle location technology can also be used. Vehicle information can be viewed on electronic maps via internet with specialized software. The history of vehicle tracking dates to the beginning of GPS technology in 1978. In the early years, the technology was not yet operational, due to an insufficient number of satellites orbiting the earth. On Jan. 17, 1994, after years of gradual growth, the final of the first 24 satellites was launched, and the GPS system was considered fully operational. Early GPS was designed primarily only for military but in 1996, President Bill Clinton determined that the system would be an asset to civilians as well as the military. This policy change made GPS technology available to the average individual, including fleet managers, who could see the benefit of using the technology to keep tabs on their vehicles. In the early days of fleet tracking, in order to properly track a fleet, each vehicle had to be enabled with a costly GPS device. The company was required to pay a typically high monthly fee to use the satellite tracking system. While helpful, these early systems were difficult to implement, costly to use and sometimes inconvenient for drivers and fleet management alike. Thus it took several years for the concept to catch on. In the earliest days, only large, wealthy fleets took advantage of the technology. The modern fleet tracking system provides the necessary data to fleet managers allowing them to run their operations more efficiently. Reports on driver behavior, vehicle performance and fuel use all make it easier for the fleet manager to cut costs and increase efficiencies. These systems go beyond simple reporting of each vehicle’s location, offering fleet managers a wealth of information about their vehicles and their drivers [1].
Major constituents of the GPS-based tracking are:
- GPS tracking: The device fits into the vehicle and captures the GPS location information apart from other vehicle information at regular intervals to a central server. Other vehicle information can include fuel amount, engine temperature, altitude, reverse geocoding, door open/close, tire pressure, cut off fuel, turn off ignition, turn on headlight, turn on taillight, battery status, GSM area code/cell code decoded, number of GPS satellites in view, glass open/close, fuel amount, emergency button status, cumulative idling, computed odometer, engine RPM, throttle position, GPRS status and a lot more. Capability of these devices actually decide the final capability of the whole tracking system; most vehicle tracking systems, in addition to providing the vehicle's location data, feature a wide range of communication ports that can be used to integrate other on board systems, allowing to check their status and control or automate their operation.
- GPS tracking server: The tracking server has three responsibilities: receiving data from the GPS tracking unit, securely storing it, and serving this information on demand to the user.
- User interface: The UI determines how one will be able to access information, view vehicle data, and elicit important details from it [2].
In Bangladesh this VTS is available. There are some company like GP, ROBI provides Vehicle Tracking Service (VTS) which has some common features like tracking the vehicle using satellite GPS & GSM communication. But there is no system which can detect accident and also give the service of VTS. Here comes carsafe project which can detect speed of a car, location of a car, and if there is any accident occur it can communicate automatically to the nearest police station, hospital and owner to reduce instant loss or damage.
1.3 OBJECTIVE OF THE PROJECT
Here the following objectives are set, in the view of above mentioned research background for the present work in VTS, accident detection and rescue information system.
- To design a vehicle accident detection and rescue information system based on GSM/GPRS/GPS technology.
- To implement a web service for the vehicle owner, nearest police station and hospital to receive notification about the accident occurrence and its location.
1.4 PURPOSE OF THE PROJECT
The main purpose of this work is to stop violation of traffic law which is the major cause of road accident.
1.5 PROJECT MOTIVATION
There are some company provides vehicle tracking system. Every VTS do the same thing like speed check, track vehicle. Some VTS can detect an accident. But there is no VTS that gives notification to the nearest hospital and police station if any accident occurs. In Nigeria, where a person who faces an accident get less facility in treatment there need a system that can communicate to the nearest hospital and police station. Statistics shows, there are more than 3,000 people die on Nigeria's roads every year. The country has one of the highest rates in the world, with more than 85 deaths for every 10,000 registered motor vehicles. That's around 50 times higher than the rate in most western countries. According to the World Health Organization (WHO), road traffic injuries cause a loss of about 2% of GDP in Nigeria, or about £1.2bn annually. This is almost equal to the total foreign aid received in a fiscal year. The losses include direct and indirect expenses, such as medical costs, insurance loss, property damage, family income losses and traffic congestion [3].
1.5 SIGNIFICANCE OF THE PROJECT
Use of technologies like Internet of Things (IoT) can ease the process of data collection and analysis. The advantages of idea proposed by this paper are reduction in number of accidents, inconvenience during driving.
1.6 APPLICATION OF THE PROJECT
This device is designed to be used by drivers in order to reduce the number of accident that happens on our ways.
1.7 PROBLEM OF THE PROJECT
The only problem discovered in this technology which can also make majority of drivers not to use it is the cost. The cost of installing this device is higher than when installing other automobile devices.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "AA" is also available. Order full work to download. Chapter two of "design and construction of iot based vehicle monitoring and reporting system" consists of the literature review. In this chapter all the related work on "design and construction of iot based vehicle monitoring and reporting system" was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of iot based vehicle monitoring and reporting system" is available. Order full work to download. Chapter three of "design and construction of iot based vehicle monitoring and reporting system" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of iot based vehicle monitoring and reporting system" is available. Order full work to download. Chapter four of "design and construction of iot based vehicle monitoring and reporting system" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of "design and construction of iot based vehicle monitoring and reporting system" is available. Order full work to download. Chapter five of "design and construction of iot based vehicle monitoring and reporting system" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
