DESIGN AND CONSTRUCTION OF NOISE DETECTOR IN LIBRARY
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of noise detector in library". Please, sit back and study the below research material carefully. This project topic "design and construction of noise detector in library" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of noise detector in library" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of noise detector in library" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
APPROVAL PAGE
This is to certify that the research work, "design and construction of noise detector in library" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of noise detector in library" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of noise detector in library" visible for everyone, then the complete material on "design and construction of noise detector in library" is to be ordered for. Happy viewing!!!
This project is titled design and construction of a noise detector in library. Noise detector in library is an electrical device that turns ON an alarm whenever noise is detected. The most important feature of the noise detector in library is its small microphone. The microphone detects sound, such as laughs, slamming doors, and claps of hands. The sound is changed into electrical waves. The electrical waves are magnified by a transistor. The transistor feeds the amplified sound to a flip-flop circuit. The flip-flop reverses the output and feeds another amplified circuit. The amplified circuit is connected to a buzzer which blows alarm.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- PURPOSE OF THE PROJECT
- APPLICATION OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- PROBLEM STATEMENT
- SCOPE OF THE PROJECT
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- OVERVIEW OF NOISE
- REGULATION OF ACOUSTIC NOISE
- REVIEW OF RECORDING AND REPRODUCTION NOISE
- REVIEW OFTHE RELATED STUDY
- THEORY OF SOUND
- REVIEW OF COMPONENTS USED
CHAPTER THREE
3.0 CONSTRUCTION
3.1 SYSTEM OPERATION
3.2 CIRCUIT DIAGRAM
3.3 PARTS LIST
3.4 CIRCUIT OPERATION
3.5 POWER SUPPLY UNIT
3.6 MICROPROCESSOR UNIT
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING OF SYSTEM OPERATION
4.4 COST ANALYSIS
CHAPTER FIVE
5.0 CONCLUSION
5.1 RECOMMENDATION
5.2 REFERENCES
CHAPTER ONE
- INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Library is a place within a school or state where students, staff, and often, parents of a public or private school have access to a variety of resources. The goal of the school library media center is to ensure that all members of the school community have equitable access "to books and reading, and to information.
Library is the place of peace and silence where students get opportunity to study and view different reference materials. Peace and silence is the most important feature of library. But many times students don’t give much attention to it and consider it to be the normal place. So students make noise in library and ruin its attribute. So taking this issue into consideration, a simple electronic device was designed that can solve this problem.This project is for the design and construction of the NOISE DETECTOR IN LIBRARY. This device is able to detect the noise, compare the intensity of louder sound and hence producing the warning signal to the librarian. This system is very economical and helpful in maintaining peace in library.
1.2 OBJECTIVE OF THE PROJECT
The objective of this project is to design and construct a noise activated alarm circuit that can be used to monitor the school library. It gives an indication to the librarian whenever there is noise in the library.
1.3 PURPOSE OF THE PROJECT
The purpose of the project is to maintain the quietness of the library through an electronics device. This noise detector alarm circuit comprising a sound amplifier and a flip flop is presented here.
1.4 APPLICATION OF THE PROJECT
This device can be used in both in school and states libraries or anywhere noise is been monitored.
In industries, sound activated switch is used to control an alarm and time of danger when the security of any place in industries is needed, and also used to monitor intruders in any given environment by activating an alarm when the noise of the intruder gets to the microphone of the system. It can be used to switch on/off any electrical appliances.
1.5 SIGNIFICANCE OF THE PROJECT
This study exposes me to the function of a microphone such as that microphone converts the pressure waves caused by sound into vibrations within a coil which transforms the vibrations into electric signals.
This work also exposed me to application of transistor such as using transistor as a switch and also application of a relay such as relay is also used as a switch as well to control load.
Finally, this work mostly exposed me to how to construct this system and also exposed me to know the applications of the system such as: homes, noise activated switch is as used to control a lamp in our rooms and environs.
In industries, noise activated switch is used to control an alarm and time of danger when the security of any place in industries is needed, and also used to monitor intruders in any given environment by activating an alarm when the noise of the intruder gets to the microphone of the system.
1.6 STATEMENT OF THE PROBLEM
The only problem we discovered in this work is that the device’s alarm can cause distraction to the users of the library whenever noise is been detected.
1.7 SCOPE OF THE PROJECT
In this project we have designed a technology to detect the noise and produce the output according to the intensity of noise made. When the sound exceeds the threshold, it is considered as noise which in turn triggers the timer and an output is seen in the LED.
1.8 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to a noise detector. In this chapter, the background, significance, objective limitation and problem of a noise detector were discussed.
Chapter two is on literature review of a noise detector. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of noise detector in library" is also available. Order full work to download. Chapter two of "design and construction of noise detector in library" consists of the literature review. In this chapter all the related work on "design and construction of noise detector in library"was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of noise detector in library" is available. Order full work to download. Chapter three of "design and construction of noise detector in library" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of noise detector in library" is available. Order full work to download. Chapter four of "design and construction of noise detector in library" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of "design and construction of noise detector in library" is available. Order full work to download. Chapter five of "design and construction of noise detector in library" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
