USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of smart pool". Please, sit back and study the below research material carefully. This project topic"design and construction of smart pool"have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this"design and construction of smart pool"project research material is to reduce the stress of moving from one school library to another all in the name of searching for"design and construction of smart pool"research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

---

APPROVAL PAGE

This is to certify that the research work,"design and construction of smart pool"by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work"design and construction of smart pool"research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of"design and construction of smart pool"is to be ordered for. Happy viewing!!!

---

Due to the increase in drowning cases, the lack of pure water, and increasing or decreasing the temperature of water in the pool. So, monitoring of swimming pool has become one of the daily routine tasks that may consume time and effort and may be dangerous at times in deep pools. The need for an automated system arose to monitor the swimming pool and the ability to know data remotely through the webpage.
Our project seeks to provide a system that performs several operations, including checking the quality of water. Also, this system checks the temperature of the water in the pool to avoid some problems that may occur, especially when the water freezes. Also, the system measures the temperature of pool water then the system will turn on the heater. This system also deals with drowning cases that may occur. Therefore, this system provides the inhabitant with all the information that it may need from anywhere he is located through a webpage without time or effort and without the need to manually check the pool.
The system has been built and verified to meet the requirements of this project, and it was found that it performs as it should and meets the needs of the project.

 

TABLE OF CONTENTS
Cover page
Title page
Approval page
Dedication
Acknowledgement
Abstract
CHAPTER ONE
INTRODUCTION
1.1      Background of the study

• Problem statement
• Aim and objective of the study
• Motivation and importance of the project
• Scope of the study
• Significance of the study

CHAPTER TWO
LITERATURE REVIEW

• Overview of internet of things

    Wireless sensor and actuator network

    Communication protocols

    Review of related work

CHAPTER THREE
METHODOLOGY

• System block diagram
• System circuit diagram
• Hardware description

Controlling Platforms

Sensors

Mobile Application

• Software description
• System  flowchart
• Proposed system implementation
• Power supply unit

CHAPTER FOUR
4.0  SYSTEM IMPLEMENTATION, TESTING, AND DISCUSSION
4.1     Introduction

•      Description of the implementation
•      Testing
•     Discussion

CHAPTER FIVE

•     Conclusion and Future work

5.1      Conclusion
5.2      Future work
References

CHAPTER ONE
1.0                                          INTRODUCTION
1.0                                     Background of the study
Information and communications technology, over the years, has been progressively present in human life, being a branch that is in constant evolution and an essential part in our everyday life. With this evolution there is a growing number of physical objects and devices connected to the Internet, giving rise to the concept of the Internet of Things (IoT) (Al-Fuqaha et al., 2015). IoT consists of a network of physical objects that are able of being connected to the Internet, identifying themselves, and communicating with each other to achieve a common goal. The main purpose of this technology is to exchange and update data between physical objects and hence to achieve an optimum performance (Saha et al., 2017).
When talking about IoT it is also useful to approach another concept called Wireless Sensor Networks (WSN), a technology that is inherent in the development of smart systems. Recently, IoT and WSN have been great bets in the development of monitoring and control systems by researchers (Marais et al., 2017). This capability of monitoring and control covers a growing range of applications, among which some related to monitoring of swimming pools.
Swimming pool conditions directly depend on how well their chemical properties are monitored (Gouws et al., 2017). Its maintenance requires the performance of some tests that may be more complex when performed by a human. Therefore, it is important to implement a sensor network that is able to perform those tests correctly and more precisely. To optimize its daily maintenance, instead of manually evaluate the water properties (pH, chlorine, water level, temperature), machine room condition and surrounding space quality, comes up the proposed system, which main purpose is to control and monitoring swimming pools automatically.
Sustainability assumes an important role in preserving the planet Earth sources. Thus, it is increasingly important for the society to have sustainable attitudes in simple daily activities and particularly in the development of new technologies. In the specific case of swimming pools, it becomes relevant to monitor the water and energy consumption levels through a sensor network and, consequently, to adjust their consumption, so that there is no waste of those resources for purposes deemed not essential for the correct operation and maintenance of swimming pools.
Taking into consideration that the incorrect use of fresh water in recreational activities is nowadays a big concern as well as the need to keep track of water quality in order to inform the user about potential risk situations, swimming pool monitoring systems is something we can see in numerous automation projects already developed.
The Smart Pool System is an internet of thing (IoT) based device that is capable of automating the pool processes by Drowning alert (warning) for the pool, knowing the water quality and water temperature.

The project aims to design a system that we will be commanded the Arduino microcontroller through a webpage to control the problem of drowning, water quality, and water temperature.
Where the system finds solutions to the following problems: temperature drop below 18 degrees Celsius, Low water quality (the degree of pollution of the swimming pool water exceeds 700), and the case of drowning in the water as follow:

• If the temperature drops below 18 degrees Celsius, the system turns on the heater which raises the temperature of the pool.
• If the water quality drops so that the water pollution exceeds 700 degrees, the system withdraws all the water from the pump to replace it with clean water.
• To avoid drowning, the person dressed a hat, if the water touches this hat for 15 continuous seconds the buzzer will start working and beep.

1.2                                          Problem statement
Many problems and dangers are related to swimming pools, people were drowned while swimming especially children, pollution of the pool water and the presence of sediments inside it which makes it unsuitable for swimming and taking into account the ideal water temperature appropriate for each category age.
This device was carried out to provide solution to above mentioned problems. The main objective of our project is to design a simple, easy to install, microcontroller-based circuit to monitor the pool. It communicates with the various sensor modules in real-time to control the important parameter. Communication will be wirelessly to make the system expandable in the future. The user has only to start the system with one click on a webpage.
1.3      Aim and objectives of the study
The main aim of this study is to build a smart pool system that will provide resources savings for the final user in financial and natural resources, contributing to a sustainable environment.
The main objectives of this system are:

• To build the system prototype
• To reduce the requirements for human intervention in the swimming pool maintenance
• The system will be sent a notification (warning) to the webpage in drowning cases.
• The system will be able to check the quality of water.
• The system will be able to check the water temperature at a certain threshold.

1.4      Motivation and importance of the project
One of the most important motives for this project in the current era is that one of the biggest problems the world faces is drowning (especially for children), also low water temperature which leads to dangerous diseases like respiratory diseases and low water quality that affects the health of people who swim in swimming pools where it leads to serious skin diseases especially water that contains chlorine, so a system is required to ensure that the pool is used wisely.
It will also have many advantages for swimming pools. Pool control will become much easier and more convenient, We have chosen this project to make swimming pools easier to care for and to handle most efficiently, to ensure a safe environment for the human body, and to eliminate the difficulties involved in the system by minimizing human intervention as much as possible.
1.5      Scope of the study
The scope of this study covers providing a new scheme for monitoring and controlling the swimming pool’s quality through a low-cost system based on wireless sensor networks, which can reduce the requirements for human intervention in the swimming pool maintenance. The proposed system enables users with administrator permissions to control actions in the swimming pool, in order to stabilize some required parameters for its good quality using microcontroller and sensors.
1.6      Significance of the project
This project will serve as a means of providing information and management system for swimming pools. This system consists of a sensor node interfacing with sensors (to measure pH, chlorine level, temperature, cleaner mobility and water level) and actuators, and a web-based user interface that can be accessed remotely for controlling the system. The project has really accurate sensors, providing an optimum maintenance of the swimming pools. However, the implemented sensors are extremely expensive, which creates a system that is not easily accessible to all users.

CHAPTER FIVE
5.1                         CONCLUSIONS AND FUTURE WORK
This paper presents a proposal for a system that provides users the capability to effectively control and monitor their swimming pools. The proposed solution has the main goal of promoting a sustainable environment, reducing the consumption of natural and financial resources for the final user and thus achieve a high-efficiency level. The proposed architecture is based on WSNs, combining low-cost and low power hardware with long range communication modules, that allows the system to be more efficient and run on batteries for extensive time periods.
For future work, the system needs to be implemented and tested in real case environments in order to analyse its performance and thus conclude if it is possible to reach the desired efficiency level.
Although this system was designed for swimming pools, other water features, such as artificial fountains or lakes, can be used as additional implementation scenarios.
A smart pool system can solve many of the problems facing people, such as checking the quality of water, which if it is not pure, affects the health of individuals, and solving the problems that may occur in the smart pool in terms of low water temperatures, drowning case, which saves a lot of time and effort and eliminates the danger that may occur. In this system, users can view all their data through the web page, and they can control the pump on the
pool by making it on or off. The control also deals with some things that may lead to low temperature, water quality, which may sometimes occur without the knowledge of the user, which reduces time, effort, and cost.
This system has been built and verified to work as required to achieve the requirements of this project, and it was found that it works as required and meets the needs of this project.
future recommendation
In the future, we look forward to adding important features to the system, the most important of which are:

1. Develop the system to deal with more than one pool
2. Developing and enlarging the pump system inside the pool so that the pool can be emptied during the drowning process and polluted water inside the pool can be purified faster.
3. Connecting the system with the authorities responsible for managing the swimming pools so that it can be controlled better and faster.

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of"design and construction of smart pool"is also available. Order full work to download. Chapter two of"design and construction of smart pool"consists of the literature review. In this chapter all the related work on"design and construction of smart pool"was reviewed.

CHAPTER THREE: The complete chapter three of"design and construction of smart pool"is available. Order full work to download. Chapter three of"design and construction of smart pool"consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of"design and construction of smart pool"is available. Order full work to download. Chapter four of"design and construction of smart pool"consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of"design and construction of smart pool"is available. Order full work to download. Chapter five of"design and construction of smart pool"consist of conclusion, recommendation and references.

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: