USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of temperature control automatic switch." Please, sit back and study the below research material carefully. This project topic "design and construction of temperature control automatic switch" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography. Our aim of providing this "design and construction of temperature control automatic switch " project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of temperature control automatic switch " research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF TEMPERATURE CONTROL AUTOMATIC SWITCH
BY
---
EE/H2013/01430
DEPARTMENT OF ---
SCHOOL OF --
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of temperature control automatic switch" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a B.Sc on --- has been approved.
By
Dr. --- Dr. ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
Dr. ---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work “design and construction of temperature control automatic switch” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” visible for everyone, then the complete material on “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” is to be ordered for. Happy viewing!!!
This project is titled design and construction of a temperature control automatic switch. It is designed to control electric appliances such as electric kettle, oven, incubator, or lamp through the variation of temperature range (0°C -100°C) which must be set by the user or operator. And this can be achieved by the use of temperature sensor known as THERMISTOR. This thermistor is a temperature control device with a high or low resistance value which can go high or low when the temperature is increased or reduced depending on the type.
In this project, 100C is used as a set temperature. And this device is design in such a way that when the set temperature of the device is reached, the relay of the device will automatically triggered and will maintain this stage until when the temperature of the sensor is dropped 97°C, and then it will return normally open stage in order to maintain that 100°C. And this automatic feature is controlled by a high current relay, and the two LED used are for power and temperature indication.
TABLE OF CONTENT
Title Page
Approval Page
Dedication
Acknowledgement
Abstract
Table of Content
CHAPTER ONE
1.0 Introduction
1.1 background of the project
1.2 problem statement
1.3 objective of the project
1.4 significance of the project
1.5 application of the project
1.6 scope of the project
1.7 methodology
1.8 project organisation
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 Overview of temperature controller
2.2 Review of different types of temperature controller and their working principle
2.3 Major Component’s Description
2.1 Resistors
2.2 Diodes
2.3 Capacitors
2.4 Transformers
2.5 Transistor
2.6 Integrated Circuit
2.7 Thermistor
CHAPTER THREE
3.0 Sectional Description of the System
3.1 Comparator Section
3.2 Switching (relay) Section
3.3 Power supply
3.4 sensor
3.5 circuit operation
CHAPTER FOUR
4.0 Construction Procedure and Testing
4.1 Casing and Packaging
4.2 Assembling of Sections
4.3 Testing of System Operation
4.4 Installation of the Completed System
4.5 Problem Encountered
4.6 Cost Analysis
CHAPTER FIVE
5.1 Conclusion
5.2 Recommendation
5.3 Bibliography
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
A temperature controlled automatic switch controls appliances such as household electric kettle, which is usually has a heating element which is mounted at the bottom of a water tank through a heat conducting base. A conventional temperature control system typically uses a bi-metal temperature sensor (also known as a thermostat) to sense the temperature of the device, if it is used in electric kettle: the temperature of the water inside the kettle is measured and the steam when the water is boiled, and then cut off the electric power if the water temperature reaches the bi-metal action temperature point or if sufficient amount of steam is detected. Some modern temperature control switch uses more precise electronic temperature sensors such as the NTC (Negative Temperature Coefficient) resistors (thermistors), which are capable of sensing the temperature through a very wide range of points instead of just one point. In some cases, the control systems of the system is configured to take into account the temperature rising rate in addition to the absolute temperature value so that the control precision is greatly improved.
The idea behind the design and construction of this switch is to make available or alternative means providing safety and accuracy demand for switching household or industrial electrical appliances. This goes a long way in helping to curb the problem frequently encountered as a result of fire outbreak, burning of food, and inaccuracy found in measuring and maintaining temperature. That notwithstanding it makes it possible to have other means of heating food without constant temperature monitoring until when the required temperature will be achieved thereby creating time for the operator to be engaged on other works while the system is in operation.
Moreover, there are higher rate of fire accident cause by switching of devices. So there is every need that other means of safety should be made available for constant running of our electric equipments and gadgets and also to provide comfort to man. Hence, with the help of a Thermistor, which has come to solve the problem of fire accident and inaccuracy found in temperature measurement in Nigeria, a steady running and operation of our electric equipments and gadgets is guaranteed.
1.2 PROBLEM STATEMENT
Today’s world is affected by a phenomenon of global warming due to which the temperature is rising which makes the human lives uneasy. Thus, there is a prevalent use of a Air Conditioners in homes thus there is a huge requirement of power. In this project work, we are going to control the temperature of multiple rooms using Air-Conditioners by sharing the temperature among them. This will start the AC depending upon the temperature label in a room by sharing the load
1.3 OBJECTIVE OF THE STUDY
The objective of this work is to design a device which will automatically control or switch ON and OFF electrical appliances by sensing the temperature of the environment or the device which it is controlling without the help of the user.
1.4 SIGNIFICANCE OF THE PROJECT
Temperature controlled switch typically uses a temperature sensor (also known as a thermistor) to sense the temperature and then cut off the electric power if the temperature reaches the action temperature point. The temperature sensors, NTC (Negative Temperature Coefficient) resistors (thermistor), which is capable of sensing the water temperature through a very wide range of points.
1.5 APPLICATION OF THE PROJECT
Outside the culinary world, temperature control switch is used for a number of purposes.
Furnace: A furnace can be used either to provide heat to a building or used to melt substances such as glass or metal for further processing. A blast furnace is a particular type of furnace generally associated with metal smelting (particularly steel manufacture) using refined coke or similar hot-burning substance as a fuel, with air pumped in under pressure to increase the temperature of the fire.
kiln: A kiln is a high-temperature temperature control electric kettles used in manufacturing to convert mineral feedstock (in the form of clay or calcium or aluminum rocks) into a glassier, more solid form. In the case of ceramic kilns, a shaped clay object is the final result, while cement kilns produce a substance called clinker that is crushed to make the final cement product.
Autoclave: An autoclave is an kettle-like device with features similar to a pressure cooker that allows the heating of aqueous solutions to higher temperatures than water's boiling point in order to sterilize the contents of the autoclave.
Industrial electric kettle:Industrial temperature control electric kettles are similar to their culinary equivalents and are used for a number of different applications that do not require the high temperatures of a kiln or furnace.
1.6 SCOPE OF THE PROJECT
Temperature controlled switch include a relay, power supply and a sensor for sensing the temperature of the environment or device, and a control unit being configured to collect data during the operation of the circuits. The control unit is also configured to execute a predetermined program and calculate a cut-off temperature based on the data and a predetermined target temperature. The control unit is further configured to turn off the electric power provided to the controlled appliances through a relay, when the temperature of the sensor is equal to or greater than the calculated cut-off temperature.
1.7 LIMITATION OF THE PROJECT
Though temperature controlled switch is designed to controlled appliances, but when the sensor is directly exposed to liquid (water) can damaged the sensor thereby causing the sensor to malfunctioning.
1.8 METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:
- Study of the previous work on the project so as to improve it efficiency.
- Draw a block diagram.
- Test for continuity of components and devices,
- Design and calculation for the device was carried out.
- Studying of various component used in circuit.
- Construction of the circuit was carried out.
- Finally, the whole device was cased and final test was carried out.
1.9 PROJECT ORGANISATION
The work is divided into five sections including this introduction. Section 2 is on the trend and causes of oil spillage in Nigeria whereas the study area and method of data collection are in Section 3. Results of findings are discussed in Section 4. The way forward is and conclusion in Section 5.
CHAPTER TWO: The complete chapter two of “design and construction of temperature control automatic switch” is available. Order full work to download. Chapter two of “design and construction of temperature control automatic switch” consists of the literature review. In this chapter all the related work on “design and construction of temperature control automatic switch "
CHAPTER THREE: The complete chapter three of “design and construction of temperature control automatic switch ” is available. Order full work to download. Chapter three of “design and construction of temperature control automatic switch” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of temperature control automatic switch ” is available. Order full work to download. Chapter four of “design and construction of temperature control automatic switch” consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a “design and construction of temperature control automatic switch ” is available. Order full work to download. Chapter five of “design and construction of temperature control automatic switch” consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.
For more information contact us through Any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
Watsapp No :+2348146561114
To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.