USER'S INSTRUCTIONS: The project work you are about to view is on design and fabrication of a pedal operated hacksaw. Please, sit back and study the below research material carefully. This project topic (design and fabrication of a pedal operated hacksaw) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and fabrication of a pedal operated hacksaw" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and fabrication of a pedal operated hacksaw" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND FABRICATION OF A PEDAL OPERATED HACKSAW
BY
---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, design and fabrication of a pedal operated hacksaw by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and fabrication of a pedal operated hacksaw" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and fabrication of a pedal operated hacksaw: visible for everyone, then the complete material on "design and fabrication of a pedal operated hacksaw" is to be ordered for. Happy viewing!!!
This project is on the design and construction of a pedal operated hacksaw machine. Pedal Powered Hacksaw Machine is a device which is used for cutting wood, plastic and metals. The basic principle of this machine is slider crank mechanism, which is an inversion of four bar mechanism. The concept of this mechanism is that the rotary motion is converted into reciprocating motion. The mechanism has four links connected to form sliding pair. Thus when one link is moved along the circumference of the circle, the final link will generate the sliding movement for cutting process.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 AIM OF THE PROJECT
1.3 OBJECTIVE OF THE PROJECT
1.4 SCOPE OF THE PROJECT
1.5 SIGNIFICANCE OF THE PROJECT
1.6 SCOPE OF THE PROJECT
1.7 LIMITATION OF THE PROJECT
1.7 PURPOSE OF THE PROJECT
1.8 APPLICATION OF THE PROJECT
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF THE STUDY
2.2 REVIEW OF THE RELATED WORK
2.3 TYPES OF HACKSAWING
2.4 FEATURES OF MODERN HACKSAW
2.5 DESCRIPTION OF HACKSAW
2.6 REVIEW OF COMPONENTS USED
CHAPTER THREE
3.0 METHODOLOGY
3.1 PROPOSED METHODOLOGY
3.2 COMPONENTS USED AND CALCULATIONS
3.3 DESCRIPTION OF THE HACKSAW MACHINE
- DESCRIPTION OF THE PROJECT SETUP
3.5 WORKING OF THE PROJECT
3.6 DESIGN DIAGRAM
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 MOUNTING PROCEDURE
4.4 TESTING OF SYSTEM OPERATION
4.5 RESULT
4.6 COST ANALYSIS
CHAPTER FIVE
5.0 CONCLUSION, FUTURE SCOPE, AND REFERENCES
5.1 CONCLUSION AND FUTURE SCOPE
5.2 RECOMMENDATION
5.2 REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
Pedal power is the transfer of energy from a human source through the use of a foot pedal and crank system. This technology is most commonly used for transportation and has been used to propel bicycles for over a hundred years. Less commonly pedal power is used to power agricultural and hand tools and even to generate electricity. Some applications include pedal powered laptops, pedal powered grinders and pedal powered water wells. Some third world development projects currently transform used bicycles into pedal powered tools for sustainable development. This project concentrates on pedal powered hacksaw machining. An individual can generate four times more power (1/4 HP) by pedaling than by hand- cranking. At the rate of ¼ HP, continuous pedaling can be served for only short periods, approximately 10 minutes. However, pedaling at half this power (1/8 HP) can be sustained for close to 60 minutes but power capability can depend upon age. As a consequence of the brainstorming exercise, it was apparent that the primary function of pedal power one specific product was particularly useful: the bicycle. Many devices can be run right away with mechanical energy. A saw is a tool that uses a hard blade or wire with an abrasive edge to cut through softer materials. The cutting edge of a saw is either a serrated blade or an abrasive. A saw may be worked by hand, or powered by steam, water, electric or other power. An abrasive saw uses an abrasive disc or band for cutting, rather than a serrated blade.
The principle of pedal power hacksaw is to change circulatory motion or cycling motion into translatory motion with the help of metal cutting rod. This is mainly used for cutting metals and plastics. it is manually pedal operated system. If we use dynamo then we can produce electricity which will be help to lighting the work piece area when electricity is not available in mechanical workshop. A hacksaw is a fine- tooth saw with a blade under tension in a frame, used for cutting materials such as metal or plastics. Hand-held hacksaw consist of a metal arch with a handle, usually a pistol grip, with pins for attaching a narrow disposable blade. A screw or other mechanism is used to used to put the thin blade under tension. It is a fine tooth hand saw with a blade under tension. It is used to cut metals and PVC pipes. It would be useful in many projects discussed on this site which used plastic pipes as materials. Blades of hacksaw are measured in TPI (Tooth per Inch). Different TPI is needed for different jobs of cutting.
1.1 BACKGROUND OF THE PROJECT
Generally, a hacksaw is a handheld tool used to cut through materials like plastic tubing and metal pipes. Its cutting mechanism is provided by removable blades which feature sharp teeth along their outer edge. In most cases, a hacksaw consists of a metal frame that resembles a downward- facing. A handle of plastic, wood, or metal is typically affixed to one end of the frame. The frame’s ends feature adjustable pegs that can be tightened to secure a blade in place, and loosened to remove it. Hacksaw blades are long, thin strips of hardened steel that feature a row of teeth along their cutting edge. Each end of the blade is punched with a small hole that fits onto the saw frame’s pegs. Most blades range in length from ten to 12inches (25.4 to 30.48 cm), although six-inch (15.24 cm) blades can be purchased to fit smaller hacksaw models.
1.2 AIM OF THE PROJECT
The aim of this work is to design and construct a pedal driven hacksaw machine that will use a less effort pedaling power to produce uniform cutting of PVC pipes, metals, wood and as the same time serve as an exercising machine for fitness. it is also done to show the performance difference between hand driven and pedal driven hacksaw.
1.3 PURPOSE OF THE PROJECT
The main purpose this project is to save man power and time in cutting metals in order to achieve high productivity. It is a cutting machine with teeth on its blade used specially for cutting metals. This machine save man power and time in cutting metals and at the same time achieve high productivity
1.4 OBJECTIVE OF THE PROJECT
The objective of this work is:
- To cater to the issue of competition in mechanical industry the need for automation is assess by all the industry.
- To identify the key policy avenues considered to be appropriate to meet the challenge of sustainable manufacturing and packaging industry for the future.
- To provide alternative for industries aiming toward reducing human effort and improvement in material handling system by implementing automation.
- Sustainable and practical automation solutions for the future industrial environment.
1.4 SIGNIFICANCE OF THE PROJECT
A device that applies force, changes the direction of a force, or changes the strength of a force, in order to perform a task, generally involving work done on a load. This machine is often designed to yield a high mechanical advantage to reduce the effort needed to do that work. A simple machines a wheel, a lever or an inclined plane. All other machines can be built using combinations of these simple machines.
- The machine can solve the problem of time consumption.
- Waste of resources in face of labor cost is reduced.
- The machine can be used in the industry where it is manufactured, at the packaging sector.
- And it is used as hardware in large quantity like in fabrication of machine
- It provide alternative for industries aiming toward reducing human effort
- It generates sustainable and practical automation solutions for the future industrial development.
1.5 SCOPE OF THE PROJECT
- Working medium adopted is mechanical power.
- The machine works without the help of electricity.
- The rotary motion of the pedalling operation performed to our required on the cutting job.
- The work piece is clamped on the work table using suitable clamp devices like clamp.
- After clamping by pedalling the rotary motion of the pedal is converted into to and fro motion of the cutting tool and cutting operation takes place on the work piece.
- After machining work piece is removed and cleaned
1.6 NEED FOR THE PROJECT
The operation of the system is based on the mechanization. Mechanization is the process of doing work with machinery. In an early engineering text a machine is defined as follows:
“Every machine is constructed for the purpose of performing certain mechanical operations, each of which supposes the existence of two other things besides the machine in question, namely, a moving power, and an object subject to the operation, which may be termed the work to be done. Machines, in fact, are interposed between the power and the work, for the purpose of adapting the one to the other.” In some fields, mechanization includes the use of hand tools. In modern usage, such as in engineering or economics, mechanization implies machinery more complex than hand tools and would not include simple devices such as an un- geared horse or donkey mill. Devices that cause speed changes or changes to or from reciprocating to rotary motion, using means such as gears, pulleys or sheaves and belts, shafts, cams and cranks, usually are considered machines. After electrification, when most small machinery was no longer hand powered, mechanization was synonymous with motorized machines
This work is design to overcome the stress attached to hand cutting of engineering materials by turning it into an exercise for body fitness.
1.7 LIMITATIONS OF THE PROJECT
- Leads to physical stress
- High thick wood cannot be cut
- More amount of human efforts is required.
1.8 ADVANTAGES OF THE PROJECT
- Pedal powered hacksaw can be used for light duty cutting operations of plywood.
- Pedal powered hacksaw can be used in remote places where electricity is not available.
- It is designed as a portable one which can be used for cutting in various places.
- The ply wood can be cut without any external energy like fuel or current.
- Since Pedal powered hacksaw uses no electric power and fuel, this is very cheap and best.
- Pedal powered hacksaw saw helps to obtain less effort uniform cutting.
- There are fewer losses in power transmission by using pedal powered hacksaw
- As pedalling is done by human it is good exercise and is goo to health.
1.9 APPLICATION OF THE PROJECT
- In a furniture making industry at production it is widely used
- It can perform cutting operation in various kinds of industries.
- This machine can be applied in carpentry and plumbing works also.
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF THE STUDY
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of design and fabrication of a pedal operated hacksaw is also available. Order full work to download. Chapter two of design and fabrication of a pedal operated hacksaw consists of the literature review. In this chapter all the related work on design and fabrication of a pedal operated hacksaw was reviewed.
CHAPTER THREE: The complete chapter three of design and fabrication of a pedal operated hacksaw is available. Order full work to download. Chapter three of design and fabrication of a pedal operated hacksaw consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of design and fabrication of a pedal operated hacksaw is available. Order full work to download. Chapter four of design and fabrication of a pedal operated hacksaw consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a design and fabrication of a pedal operated hacksaw is available. Order full work to download. Chapter five of design and fabrication of a pedal operated hacksaw consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
