USER'S INSTRUCTIONS: The project work you are about to view is on "design and fabrication of a remote control motor car". Please, sit back and study the below research material carefully. This project topic (design and fabrication of a remote control motor car) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and fabrication of a remote control motor car" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and fabrication of a remote control motor car" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their s[tudents to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND FABRICATION OF A REMOTE CONTROL MOTOR CAR
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and fabrication of a remote control motor car" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and fabrication of a remote control motor car" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and fabrication of a remote control motor car" visible for everyone, then the complete material on "design and fabrication of a remote control motor car" is to be ordered for. Happy viewing!!!
This work is on a remote control motor car. Remote controlled car is battery/ powered model cars or trucks that can be controlled from a distance using a specialized transmitter or remote. This Radio controlled system is adopted in many vehicles like cars, boats, planes, and even helicopters and scale railway locomotives. In this work we will use a couple of ICs and a motor fixed to a chassis to make a remote control car. This work involve a brief idea is to transmit control signals through radio frequency and receive it through a receiver module in the car. We will have two switches in our remote control to power each motor of the car.
The objective of this project is to design a low cost remote control toy or robot. In this work we shall assemble the motors, circuit, and wheels on the chassis.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
- BACKGROUND OF THE PROJECT
- PROBLEM STATEMENT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- BENEFIT OF THE STUDY
- LIMITATION OF THE PROJECT
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
2.0 LITERATURE REVIEW
2.1 LITERATURE REVIEW OF REMOTE TECHNOLOGY
2.2 HISTORICAL BACKGROUND OF REMOTE CONTROL
2.4 REVIEW OF DIFFERENT TYPES OF REMOTE CONTROL CAR
CHAPTER THREE
3.0 METHODOLOGY
3.1 INTRODUCTION
3.2 BLOCK DIAGRAM OF THE SYSTEM
3.3 BLOCK DESCRIPTION
3.4 ELECTRONIC COMPONENTS USED
3.5 CIRCUIT DESIGN OF REMOTE CONTROL CAR
CHAPTER FOUR
RESULT ANALYSIS
4.1 CONSTRUCTION PROCEDURE
4.2 ASSEMBLING OF SECTIONS
4.3 MOUNTING PROCEDURE
4.4 TESTING
4.5 RESULT
4.6 ECONOMIC OF THE PROJECT
4.7 RELIABILITY
4.8 MAINTAINABILITY
4.9 PROJECT EVALUATION
4.10 BILL OF ENGINEERING MEASUREMENTS AND EVALUATION
CHAPTER FIVE
- CONCLUSIONS
- RECOMMENDATION
5.3 REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Remote control car referred to as RC Car, RC is short for Radio control or Remote control. In Europe, Japan and Southeast Asian countries, the remote control model car race is a kind of sports competitions and a noble sport, even a high-tech hobby. This is a competition from age limit because enthusiasts who participate in this sport is aged from 8 to 80 years. This also suggests that the remote control cars is the same as remote control aircraft, whether adult or children can play. However, it has a certain degree of risk, because the remote control car is not a simple toy, its principle is the same as the real car. So, I still recommend that children would better to accompany by their parents.
Electric remote control car is primarily provided power by an electric motor. Due to powered by a battery, it has the higher the overall operating efficiency and excellent acceleration performance of vehicles. Because of Clean Energy, the vehicle maintenance is very convenient, just pay attention to the maintenance of transmission parts. But because the electric motor remote control car need high requirements of motor performance and battery performance, so the motor and battery consumption is very high in the beginning, coupled with the electronic speed control, remote equipment costs.
1.2 PROBLEM STATEMENT
Kids using manual car as fun or for recreation involved physical strength and sometimes can be hazardous in that they can be injured whenever the car crash with an object or obstacle. However, this device can to overcome this problem. This device does not involve physical strength in that the motor is been controlled wirelessly suing remote.
1.3 AIM OF THE PROJECT
This project was aimed at building a wireless remotely controlled motor car. It involves using a remote to control movement and direction of a car.
1.4 OBJECTIVES OF THE STUDY
The objective of this project is to design a low cost remote control toy or robot. There are so many projects available to make motor toys. But here we are providing a simple circuit with low cost electronics components.
1.5 SIGNIFICANCE OF THE STUDY
It is very useful to study the basics of wireless communication for electronics beginners. Mainly wireless car projects use two types of technologies Infra-Red (IR) and Radio Frequency (RF). IR remote control sends infrared rays to the car circuit. In case of IR remote control, line of sight with the receiving circuit is necessary and its range is only up to 10 meters. But in case of RF remote Radio Frequency waves plays the role, so signal can go through walls and are able to provide a range up to 35 meters.
1.7 BENEFIT OF THE STUDY
Playing with RC cars can significantly develop and improve a child’s visual-motor coordination. This is the ability to coordinate visual information with motor output. Along with this skill is visual perception, which is the ability to recognize, recall, discriminate and make sense of what we see.
RC car play enhances spatial awareness spatial intelligence and awareness skills, which results in increased dexterity. In addition, kids learn about cause-and-effect during play as they work out which buttons make the car go in each direction.
While playing with other children, it also teaches them to swerve around obstacles they can’t control.
And it is no stretch to say that playing with remote control cares promotes creativity and imagination. While adults may be content to have their cars zip around a parking lot, or engage in structured games or competition, kids tend to use their imagination and create make-believe settings and scenarios.
1.8 LIMITATION OF THE PROJECT
This device was able to provide a range up to 35 meters. To operate this device becomes a problem when the remote is fault or whenever the battery of the remote runs down
1.9 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and fabrication of a remote control motor car" is also available. Order full work to download. Chapter two of "design and fabrication of a remote control motor car" consists of the literature review. In this chapter all the related work on "design and fabrication of a remote control motor car" was reviewed.
CHAPTER THREE: The complete chapter three of "design and fabrication of a remote control motor car" is available. Order full work to download. Chapter three of "design and fabrication of a remote control motor car" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and fabrication of a remote control motor car" is available. Order full work to download. Chapter four of "design and fabrication of a remote control motor car" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a "design and fabrication of a remote control motor car" is available. Order full work to download. Chapter five of "design and fabrication of a remote control motor car" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
