USER'S INSTRUCTIONS: The project work you are about to view is on "design and fabrication of a solar popcorn machine". Please, sit back and study the below research material carefully. This project topic (design and fabrication of a solar popcorn machine) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and fabrication of a solar popcorn machine" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and fabrication of a solar popcorn machine" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, "design and fabrication of a solar popcorn machine" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "design and fabrication of a solar popcorn machine" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and fabrication of a solar popcorn machine" visible for everyone, then the complete material on "design and fabrication of a solar popcorn machine" is to be ordered for. Happy viewing!!!

---

The solar popcorn machine is a device for preparing especial popcorn for the human consumption using sun as the source of energy. The device was produced to help the masses to be self- reliance in this down trodden economy. In this work, a parabolic dish was used as the solar collector while an aluminum pot was used as a popping compartment.  For effective performance the design requires that the solar popcorn heater track the sun continuously, and an automatic electronic control circuit was designed and developed for this purpose. Experimental test runs carried out showed that the overall performance of the solar popcorn machine was satisfactory. Thermal efficiencies of 52% - 56% were obtained, and this range of efficiencies is higher than the designed value of 50%. The use of a linear actuator to track the sun eliminates the need for constant monitoring by a human operator and, thus, reduces the cost of labour.
This project work is divided into five chapters, chapter one; the introduction discusses the relevance of the project work, problems it is meant to address its importance, scope and limitation.
Chapter two comprises the literature review
Chapter three brings to the assembly and principle of operation
Chapter four highlights about the various safety rules project cost evaluation and investment opportunity.
Chapter five discussed on insertion and testing recommendation and conclusion together with references and bibliography.

TABLE OF CONTENTS

 TITLE PAGE

APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT

CHAPTER ONE

• INTRODUCTION
• BACKGROUND AND OVERVIEW OF THE STUDY
• PROBLEM STATEMENT
• AIM/OBJECTIVE OF THE PROJECT
• JUSTIFICATION OF THE PROJECT
• PURPOSE OF THE PROJECT
• SIGNIFICANCE OF THE PROJECT
• ADVANTAGES OF THE PROJECT
• APPLICATION OF THE PROJECT

CHAPTER TWO

LITERATURE REVIEW
2.0      LITERATURE REVIEW
2.1      POPPING HISTORY
2.2     REVIEW OF POPPING METHODS
2.3     HISTORICAL REVIEW OF CORN
2.4     POPPING METHODS
2.5      HEAT TRANSFER (PRINCIPLE OF HEAT TRANSFER)
CHAPTER THREE

3.0    METHODOLOGY

3.1     MATERIALS USED
3.2    SELECTION OF MATERIALS FOR THE CONSTRUCTION OF THE PDSWH
3.3     THEORETICAL BACKGROUND
CHAPTER FOUR
RESULT ANALYSIS

4.1   DESIGN CALCULATIONS

4.2  DEVELOPMENT OF THE ELECTRICAL CONTROL CIRCUIT FOR THE TRACKING MECHANISM
4.3 LIST OF MATERIAL USED
CHAPTER FIVE

• CONCLUSIONS

5.3     REFERENCES 

CHAPTER ONE
1.0                                            INTRODUCTION
1.1                               BACKGROUND OF THE STUDY
Nigeria’s economy has suffered a terrible setback over the year the common man finds it difficult to make for his livelihood, some people take pop-corn as one of their favorite food especially bachelors spinsters who can take pop-corn as super, breakfast and even lunch.
The University and Polytechnics graduate no longer find good employment thereby embarks on self-employment by constructing popcorn machine to meet their needs. 
Popcorn is from a special type of maize unlike other types of corn which pops when heated. The popcorn preparation has long been in practice in Nigeria. It usually required a heating source (stove, fire wood as conventionally used), a frying pan with spoon as the stirrer. It was first discovered and used by the early Americans. Popcorn was introduced to the Western world by Christopher Columbus in the 15th century. The kind of popcorn most people pop in their microwave is the Zea mays. Zea mays everta has a certain amount of moisture content, a strong pericarp that does not allow moisture to escape very fast as other corn when heated. Consequently, a popcorn machine, which is generically used for the purpose of making popcorn for human consumption is essential. Most popcorn machines use gas, some use electricity, while some use the solar as sources of energy. The merits and demerits of these sources are observable in the production rate of the various machines, which in turn depends on the intensity of heat as well as the power source. The objective of the project, therefore, is to design and fabricate a solar popcorn machine that will enhance popcorn production using solar energy. In this work, Solar popcorn machine uses a simple solar thermal applications that convert solar radiation into heat that is used to pop up corn. Solar popcorn machine is now recognized as a reliable practice that saves substantial amounts of electricity or other conventional fuels, leads to peak load reduction and prevents emission of carbon dioxide.
1.2     PROBLEM STATEMENT
The two conventional method of making popcorn are using electricity or natural gas. The erratic nature of electricity and high cost of gas in developing country such as Nigeria has hindered the production of popcorn – which has made many people don’t show much interest in popcorn making business. It was because of this challenges that has made technology to search for solution – by initiating solar energy in popping corn. Solar popcorn machine was invented to solve the problems of power supply and high cost of gas.

1.3     AIM AND OBJECTIVES OF THE STUDY
The main aim of this work is to design and fabricate a solar based popcorn making machine. The objectives of the study are:

• To investigate the performance and optimize the design of a solar popcorn making machine
• To design and construct a parabolic dish solar popcorn machine
• To test the thermal performance of constructed prototype
• To carry out an economic analysis of the solar popcorn making machine.
• To promote local content utilization of manufactured goods and services

1.4                  JUSTIFICATION

The design of the improved and more cost effective solar popcorn making machine will encourage easier adoption of solar popcorn making technology due to the user benefits. The machine will cater for substantial household popcorn making energy needs hence reduce on carbon emissions in the atmosphere and high cost of gas. Implementation of the design will reduce on the time spent on moving from one place to another looking for gas. Certainly the project will enable cost savings compared to alternative electric or gas type.

1.5                               PURPOSE OF THE PROJECT
A solar popcorn making machine is a device which uses the energy of direct sunlight to popcorn. The purpose of introducing solar popcorn making machine is to provide a cheap means of popping corn that does not involve using gas or electricity.

1.6                                    SIGNIFICANCE OF THE PROJECT
The advantages of building a solar popcorn making machine are:
Save Money – approximately 50% of your electricity bill and gas could be saved. Using solar popcorn making machine could drastically reduce the size of installed gas cylinder.
An investment – solar popcorn making machine will add value to your property.
Environmental Friendly – solar energy is clean energy. No pollution.
Self-sufficiency – with a solar popcorn making machine you are protected from the ever-increasing cost and erratic.

1.7                           ADVANTAGES OF THE PROJECT
(1) It does not require constant attendance while popping.
(2) Since corn pops slowly, it becomes more nutritious.
(3) It does not require gas. It requires only sunlight.
(5) It can also be used as an oven for baking.

1.8                           APPLICATION OF THE PROJECT

Applications and uses of solar popcorn making machine are listed below:

• Water Distillation
• Solar Smelting
• Roasting coffee and peanut for commercial purposes.
• Wax melting
• Grain Sterilization
• Water Purification
• Dehydration

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and fabrication of a solar popcorn machine" is also available. Order full work to download. Chapter two of "design and fabrication of a solar popcorn machine" consists of the literature review. In this chapter all the related works on "design and fabrication of a solar popcorn machine" were reviewed.

CHAPTER THREE: The complete chapter three of "design and fabrication of a solar popcorn machine" is available. Order full work to download. Chapter three of "design and fabrication of a solar popcorn machine" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and fabrication of a solar popcorn machine" is available. Order full work to download. Chapter four of "design and fabrication of a solar popcorn machine" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "design and fabrication of a solar popcorn machine" is available. Order full work to download. Chapter five of "design and fabrication of a solar popcorn machine" consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: