phonelogo+234 8146561114 or +2347015391124
DESIGN AND FABRICATION OF MECHANICAL FOOTSTEP POWER GENERATOR

USER'S INSTRUCTIONS: The project work you are about to view is on design and fabrication of mechanical footstep power generator. Please, sit back and study the below research material carefully. This project topic (design and fabrication of mechanical footstep power generator) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and fabrication of mechanical footstep power generator" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and fabrication of mechanical footstep power generator" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

DESIGN AND FABRICATION OF MECHANICAL FOOTSTEP POWER GENERATOR

BY

---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018



APPROVAL PAGE

This is to certify that the research work, design and fabrication of mechanical footstep power generator by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work "design and fabrication of mechanical footstep power generator" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and fabrication of mechanical footstep power generator: visible for everyone, then the complete material on "design and fabrication of mechanical footstep power generator" is to be ordered for. Happy viewing!!!


ABSTRACT

In this project we are generating electrical energy by means of a non- conventional method just by walking on the footsteps. Non conventional  system for energies are very much required at this time. Energy generation using footsteps requires no any fuel input to generate electricity. In this project we are generating electricity just with the help of rack and pinion arrangement along with alternator and chain drive mechanism.
For its proper functioning such that it converts Force into electrical energy, the mechanism consists of rack & pinion, chain drives, alternator and battery. We have discussed its various alternate applications with extension also. The power generation is much worthy but it has little initial cost effective factors.

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1      BACKGROUND OF THE PROJECT

    1. PROBLEM STATEMENT
    2. OBJECTIVE OF THE PROJECT
    3. SCOPE OF THE PROJECT
    4. PROJECT MOTIVATION
    5. ADVANTAGES OF THE PROJECT
    6. PROBLEMS OF THE PROJECT
    7. APPLICATIONS OF THE PROJECT

CHAPTER TWO
LITERATURE REVIEW

    1. REVIEW OF RELATED STUDIES
    2. NEED FOR THE MODEL
    3. STATISTICS ON LOAD AND POWER GENERATION

CHAPTER THREE
METHODOLOGY

    1. SYTEM BLOCK DIAGRAM
    2. COMPONENTS USED
    3. DESCRIPTION OF MATERIAL USED
    4. SYSTEM DIAGRAM
    5. SYSTEM OPERATION
    6. OUTPUT POWER
    7. SYSTEM DESIGN DIAGRAM

CHAPTER FOUR
4.0 RESULTS
4.1      CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
4.2      ASSEMBLING OF SECTIONS
4.3      TESTING OF SYSTEM OPERATION
4.4      ADVANTAGES
4.5      DISADVANTAGES

CHAPTER FIVE

    1. CONCLUSION
    2. RECOMMENDATION
    3. REFERENCES

 

CHAPTER ONE

  • INTRODUCTION

For an alternate method to generate electricity there are number of methods by which electricity can be produced, if such methods footstep energy generation can be an effective method to generate electricity.  Walking is the most common activity in human life. When au person walks he loss his energy to the road in the form of impact,vibration,sound etc,due the transfer of his weight on to the road surface through foot falls on the ground during every step. This energy can be tapped and converted in usable form such as in electrical form. If this device embedded in the foot path can convert foot impact energy in to electrical form.
In this project the weight which acts on the foot step is used to  generate electrical energy. When a  person walks over the foot step, a force acts on the step. One can simply be amazed by knowing how much energy a person can have just by walking on the floor with normal speed. Whenever a person walks, manages to lose energy towards the floor by means excess weight to the floor. That energy may be used and converted into electrical energy. The Mechanical energy(weight)is converted into electrical energy using drive mechanism, in this case rack and pinion. Generated energy can be stored in batteries. Then the output of the battery is used to lighten the lamps in the room.
1.1                                         BACKGROUND OF THE PROJECT
The availability and its per capita consumptions are regarded as the index of national standard of living in the present day civilization. Energy is an important input in all the sectors of any countries economy. Energy crisis is due to two reasons, firstly the population of the world has been increased rapidly and secondly standard of living of human beings has increased.
India is the country, which majorly suffers with lack of sufficient power generation. The capital energy consumption of U.S.A is about 8000 K.W.H., whereas per INDIA is only 150 K.W.H. U.S.A. with 7% of world population consumes 32% of world population consumes 32% of total power generation where as INDIA as developing country with 20% of world population consumes only 15 of total energy consumed in the world. The availability of regular conventional fossil fuels will be the main sources for power generation, but there is a that they will get exhausted eventually by the next few decades. Therefore, we have to investigate some approximate. Another major problem, alternative, new sources for the power generation, which is not deflected by the very few years, which is becoming the exiting topic for today is the pollution. It suffers all the living organisms of all kinds as on the land, in aqua and in air. Power stations and automobiles are the major pollution producing places. Therefore, we have to investigate other types of renewable sources, which produce electricity without using any commercial fossil fuels, which is not producing any harmful products. There are already existing such systems using renewable energy such as solar wind), OTEC (ocean thermal energy conversions) etc… for power generation. The latest technology which is used to generate the power by such renewable energy is the “mechanical footstep power generator”.

1.2                                             OBJECTIVE OF THE PROJECT
The objective of this project is to generate the electric power through the fabrication of foot step arrangement. Now a day’s demand is increased, so this project is used to generate the electrical power in order to compensate the electric power demand. The whole human/bio-energy being wasted if can be made possible for utilization it will be great indentation and crowd energy frames will be very useful energy in crowded countries.

1.3                                                 SCOPE OF THE PROJECT
In this project the conversation of the force energy into electrical energy by mechanical energy. The control mechanism carries the spring, metal plates, metal bars, rack and pinion gears, chain drive system, bearings, small size generator and inverter which are used to drive AC/DC loads. The inverter is used to convert the 12 volts DC to 230 volt AC.

1.4                                                  PROJECT MOTIVATION
Proposal for the utilization of the waste energy of foot power with human locomotion is very much relevant and important for highly populated countries like china and India where the roads, railway stations, bus stops, temples etc., are all over crowded and million of people moves around the clock. This whole human being wasted if can be made for possible for it will be great invention and crowed energy farm will very useful energy sources in crowed countries. Walking across a crowed farm, then will be a fun for ideal people who can improve their health by exercising in such farms with earning. The electrical energy generated at such farms will be useful for nearby applications.

1.5                                          ADVANTAGES OF THE PROJECT

  • Free Energy Source
  • No Dependency on Sun Or Wind
  • Environment Friendly
  • Easy To Deploy
  • Power generation simply walking on steps.
  •   Power also generated by running.
  •   No need fuel input.
  • This is a conventional system.
  •   Battery is used to store the generated electricity.

1.6                                            PROBLEMS OF THE PROJECT

  •  Only applicable for Particular places.
  •  Initial cost of this arrangement is high.
  • Mechanical moving part is high.
  • Care should be taken for batteries

1.7                                         APPLICATIONS OF THE PROJECT

  •   This can be implemented on railway station to generate electric power
  •  In bus stand
  •   In car parking system
  •   In Airports
  •   In Lift systemu  In street lights
  •   Electric escalators
  •   Speed Breakers

 

CHAPTER TWO
   2.0                                                 LITERATURE REVIEW
      2.1                                      REVIEW OF RELATED WORKS

  • “PowerGeneration in Automobile Suspension System” by C.Nithiyesh Kumar,K.Gowtham, M.Manikandan, P.Bharathkanna, T.Manoj Kumar

In this research paper author studied three methods of foot step power generation namely piezoelectric method, rack and pinion method and fuel piston method comparatively and found that the rack and pinion mechanism is    more efficient     with moderate cost of operation and maintenance

  • “Generation of Electrical Energy from Foot Step Using Rack and Pinion Mechanism” by Md.Azhar, Zitender Rajpurohit, Abdul Saif, Nalla Abhinay, P.Sai Chandu
In this research paper authors used regulated 5V power, 500mA power supply. Bridge type full wave rectifier is used to rectify the ac output of secondary of 230/12V step down transformer…

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of design and fabrication of mechanical footstep power generator is also available. Order full work to download. Chapter two of design and fabrication of mechanical footstep power generator consists of the literature review. In this chapter all the related work on design and fabrication of mechanical footstep power generator was reviewed.

CHAPTER THREE: The complete chapter three of design and fabrication of mechanical footstep power generator is available. Order full work to download. Chapter three of design and fabrication of mechanical footstep power generator consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of design and fabrication of mechanical footstep power generator is available. Order full work to download. Chapter four of design and fabrication of mechanical footstep power generator consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a design and fabrication of mechanical footstep power generator is available. Order full work to download. Chapter five of design and fabrication of mechanical footstep power generator consist of conclusion, recommendation and references.

 

CLICK HERE FOR MORE RELATED TOPICS/MATERIAL


To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions


For more information contact us through any of the following means:

Mobile No phonelogo:+2348146561114 or +2347015391124 [Mr. Innocent]

Email address emailus:engr4project@gmail.com

Watsapp No whatsapp.html :+2348146561114


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp Nowhatsapp.html
:+2348146561114


E
mail Address emailus:engr4project@gmail.com


FOLLOW / VISIT US VIA:

tweeter instagram.htmlfacebook logo