This work is titled design and construction of a close circuit monitor. A close circuit monitor involves using a video camera or photography camera to monitor the situation of an environment. Closed-circuit monitor is the use of cameras to transmit a signal to a specific place, on a limited set of monitors.
It differs from broadcast television in that the signal is not openly transmitted, though it may employ point to point (P2P), point to multipoint, or mesh wireless links. Though almost all video cameras fit this definition, the term is most often applied to those used for surveillance in areas that may need monitoring such as banks, casinos, airports, military installations, and convenience stores. Many cities and motorway networks have extensive traffic-monitoring systems, using closed-circuit monitor to detect congestion and notice accidents. Many of these cameras however, are owned by private companies and transmit data to drivers' GPS systems.
This monitor utilizes a video recorder which records and saves any event monitored for future references.
The aim of this work is to design a system that monitors the situation of an environment through a camera which can be view through computer system immediately or after the monitoring.
CHAPTER ONE
1.0 INTRODUCTION
Closed-circuit monitor is the use of video cameras to transmit a signal to a specific place, on a limited set of monitors. It differs from broadcast television in that the signal is not openly transmitted, though it may employ point to point (P2P), point to multipoint, or mesh wireless links. Though almost all video cameras fit this definition, the term is most often applied to those used for surveillance in areas that may need monitoring such as banks, casinos, airports, military installations, and convenience stores. Video telephony is seldom called "CCTV" but the use of video in distance education, where it is an important tool, is often so called.
In industrial plants, close circuit monitor equipment may be used to observe parts of a process from a central control room, for example when the environment is not suitable for humans. Close circuit monitor systems may operate continuously or only as required to monitor a particular event. A more advanced form of close circuit monitor, utilizing digital video recorders (DVRs), provides recording for possibly many years, with a variety of quality and performance options and extra features (such as motion detection and email alerts). More recently, decentralized IP cameras, some equipped with megapixel sensors, support recording directly to network-attached storage devices, or internal flash for completely stand-alone operation. Surveillance of the public using close circuit monitor is particularly common in many areas around the world. In recent years, the use of body worn video cameras has been introduced as a new form of surveillance.
1.1 OBJECTIVE OF THE PROJECT
The objective of this work is to design a system that can be used to monitor the situation of an environment through a monitoring camera and which can be view through a television.
1.2 PURPOSE OF THE PROJECT
The system is intended to provide an increased level of security in the University environment for the benefit of those who study, work, live in or visit the campus.
The close-circuit system will be used to respond to the following key objectives:
- To detect, prevent or reduce the incidence of crime.
- To prevent and respond effectively to all forms of harassment and public disorder.
- To improve communications and the operational response of security patrols in and around the areas where Closed-circuit monitor operates.
- To reduce the fear of crime.
- To create a safer community.
- To gather evidence by a fair and accountable method.
- To provide emergency services assistance.
- To assist with health and safety.
- To monitor the University car parks
As community confidence in the system is essential, all cameras will be operational. An appropriate maintenance programme will be established.
1.3 SIGNIFICANCE OF THE PROJECT
As a student, this work exposed me to the working principle of the close circuit monitor and also enlightens me on how to setup the system in other to use it to monitor an environment.
Probably the most widely known use of close circuit monitor is in security systems and such applications as retail shops, banks, government establishments, etc. The true scope for applications is almost unlimited. Some examples are listed below.
- Monitoring traffic on a bridge.
- Recording the inside of a baking oven to find the cause of problems.
- A temporary system to carry out a traffic survey in a town centre.
- Time lapse recording for the animation of plasticize puppets.
- Used by the stage manager of a show to see obscured parts of a set.
- The well-publicized use at football stadiums.
- Hidden in buses to control vandalism.
- Recording the birth of a gorilla at a zoo.
- Making a wildlife program using a large model helicopter.
- Reproducing the infrared vision of a goldfish!
- Aerial photography from a hot air balloon.
- Production control in a factory.
This material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We make abstract and chapter one visible for everyone.
All Project Topics on this site have complete 5(five) Chapters . Each Project Material include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
To view other related topics click HERE
To "SUMMIT" new topic(s) OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research for your new topic? if yes, click "HERE"
For more information call us on:+2348146561114 (MTN) or +2347015391124 (AIRTEL)
IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.