USER'S INSTRUCTIONS: The project work you are about to view is on "design n construction of touch free water dispenser machine". Please, sit back and study the below research material carefully. This project topic"design n construction of touch free water dispenser machine"have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this"design n construction of touch free water dispenser machine"project research material is to reduce the stress of moving from one school library to another all in the name of searching for"design n construction of touch free water dispenser machine"research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

---

APPROVAL PAGE

This is to certify that the research work,"design n construction of touch free water dispenser machine"by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work"design n construction of touch free water dispenser machine"research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of"design n construction of touch free water dispenser machine"is to be ordered for. Happy viewing!!!

---

A water dispenser is a system or a machine which is designed and capable of responding to an instruction or request made by the user in other to dispense a particular liquid. This paper developed a touch free water dispenser that eliminates manual operation of the dispenser’s pumps. This is achieved by the use of ultrasonic sensor in the control unit that automatically detects the presence of hand holding cups or other container. It also solves the issue of overflow of fluid due to loss of concentration by the tap operator. The system built with arduino microcontroller. The outcome at the end of the specified design period was a working prototype that was able to dispense a liquid if the user places the cup or other container below the sensor. The result shows that ultrasonic sensor carries out its sensing functionality satisfactorily.

 

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1      BACKGROUND OF THE PROJECT

1. PROBLEM STATEMENT
2. AIM AND OBJECTIVES OF THE PROJECT
3. SCOPE OF THE PROJECT
4. LIMITATION OF THE PROJECT
5. METHODOLOGY
6. PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW
2.1      REVIEW OF THE STUDY
2.2      OVERVIEW OF WATER DISPENSER
2.3     TYPE OF WATER DISPENSER
2.4     WATER SOURCE AND PURIFICATION
2.5     COOLING AND HEATING METHODS
2.6      HISTORY OF THE WATER DISPENSER

CHAPTER THREE
METHODOLOGY

1. SYSTEM BLOCK DIAGRAM
2. COMPONENTS USED
3. DESCRIPTION OF COMPONENTS USED
4. WORKING PRINCIPLE
5. CIRCUIT DIAGRAM
6. CIRCUIT DESCRIPTION
7. WORKING PRICIPLE
8. PROGRAMMING THE ARDUINO BOARD
9. DESIGN CODE

CHAPTER FOUR
TEST AND RESULT ANALYSIS

1. INSTALLATION OF THE COMPLET DESIGN 
2. CONSTRUCTION PROCEDURE AND TESTING
3. ECONOMIC OF THE PROJECT
4. PROJECT VIABILITY
5. RELIABILITY
6. MAINTAINABILITY
7. PROJECT EVALUATION
8. RESULT ANALYSIS

CHAPTER FIVE

1. CONCLUSION
2. RECOMMENDATION
3. REFERENCES

 

CHAPTER ONE
1.0                                                      INTRODUCTION
1.1                                              BACKGROUND OF THE STUDY
Water pumps are very useful in the water supply, the  first wooden pumps are came into existence in 1700s the other pumps which came into the existence in mid 1800s and these pumps are known as metal piston type pumps which are driven by steam. The first submersible pumps are came into existence in 1920s
Touch free water dispenser is containing a series of many functions like controlling the water level, showing the value of TDS, showing the value of temperature, and automatic ejection of water.
In today’s life there must be some elements which is needed to be controlled, therefore the touch free water dispenser is providing the good quality of water for the human beings. In day to day life intelligent systems are used in a wide range and these are embedded in design.
There are some physical elements which are needed to be controlled in day to day life in order for them to perform their expected task.
This paper is based on a touch free water dispenser using arduino microcontroller. A water dispenser is a system or a machine which is designed and capable of responding to the instruction or request made by the user in other to dispense a particular liquid [1]. At the present era, organization like in offices, banks, and homes have been using dispenser through the manual control in which the user operate the system by pushing, holding or turning a  button until the desired amount is dispensed at regular interval. The process consumes more time and sometimes the water might overflow due to loss of concentration by the user. There is a need in the residential/commercial organization for a self-dispense liquid dispenser that responds to cup presence using an ultrasonic sensor in the system. Also, restaurants and bar businesses are always looking for a way to increase efficiency and reduce cost. This water dispenser provides these function that will precisely dispense a specific amount of liquid while reducing human labor and effort.
.
1.2                                            STATEMENT OF PROBLEM
This research work seeks to showcase how a self-dispense detecting water dispenser based on microcontroller technology will be used to solve the issues that  surrounding the existing systems like;

1. The manual operation of the liquid pumps by users.
2. Overflow of liquid due to loss of concentration by users.
3. Expensive liquid dispensers.
4. Importation of already made liquid dispenser in local content driven nation like Nigeria.

1.3                                       AIM AND OBJECTIVE OF STUDY
The main aim of this research work in trying to solve the bottle necks of the existing system will facilitate the design and construction of the arduino microcontroller based liquid dispenser system. The objectives are:

1. Elimination the manual operation of the dispensers’ pumps by the use of ultrasonic sensor in the control unit that will automatically detect the presence of cups or other container(depending on the user choice) thereby improving quick and effective response time of the products need for the user.
2. Solving the issues of overflow of fluid due loss of concentration by users. This will be addressed by the introduction of electronic keypad which enables the users to input their desired amount of liquid and also see on the display board the amount of liquid before putting the cup under the pump.
3. Minimizing cost by using our local available materials and resources for the dispenser.
4. Eradicating the importation of already made liquid dispenser into the local market when properly enforced.

1.4                                            SCOPE OF THE RESEARCH
This research covers the construction of an touch free water dispensing system. The physical prototype will be constructed with local available materials which will be able to bring out the specific amount of liquid input by user, dispense the amount of liquid in the presence of a human hand holding cup or any container.
1.5                                               LIMITATION OF STUDY
As we all know that no human effort to achieve a set of goals goes without difficulties, certain constraints were encountered in the course of carrying out this project and they are as follows:-

1. Difficulty in information collection: I found it too difficult in laying hands of useful information regarding this work and this course me to visit different libraries and internet for solution.
2. Financial Constraint:        Insufficient fund tends to impede the efficiency of the researcher in sourcing for the relevant materials, literature or information and in the process of data collection (internet).
3. Time Constraint:   The researcher will simultaneously engage in this study with other academic work. This consequently will cut down on the time devoted for the research work.

1.6                                             RESEARCH METHODOLOGY
In the course of carrying this study, numerous sources were used which most of them are by visiting libraries, consulting journal and news papers and online research which Google was the major source that was used.
1.7                                    PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work,   chapter two presents the literature review of the study,  chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.

CHAPTER FIVE

5.1                                                           CONCLUSION

This research work has successfully presented a functional and highly efficient low cost IR sensor-controlled water dispenser machine which is usable in different places within our geographical environment and settings such as hotels, homes, hospitals, executive offices, restaurants, schools etc. as way of adopting a good hand washing process or procedure hence improving hygienic condition of individuals; and this eliminates the transfer of facial pathogens from one person to another.
5.2                                                     RECOMMENDATION
Working on this topic as my project is a good idea and it comes at the right time. I am suggesting that this particular topic should also be given to other students both in higher and lower class.
This device was limited to be powered with the mains supply; I hereby recommend that a solar power should be built with the device in order for it to be used during power failure.
Different Solenoid vales have different operating voltage and current rating, make sure your solenoid operates on 12V and consumes not more than 1.5A maximum. 

 

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of"design n construction of touch free water dispenser machine"is also available. Order full work to download. Chapter two of"design n construction of touch free water dispenser machine"consists of the literature review. In this chapter all the related work on"design and construction of an arduino based public address system"was reviewed.

CHAPTER THREE: The complete chapter three of"design n construction of touch free water dispenser machine"is available. Order full work to download. Chapter three of"design n construction of touch free water dispenser machine"consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of"design n construction of touch free water dispenser machine"is available. Order full work to download. Chapter four of"design n construction of touch free water dispenser machine"consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of"design n construction of touch free water dispenser machine"is available. Order full work to download. Chapter five of"design n construction of touch free water dispenser machine"consist of conclusion, recommendation and references.

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: