phonelogo+234 8146561114 or +2347015391124

DESIGN SIMULATION AND ANALYSIS OF AN INFRARED BASED MEASURING DEVICE

USER'S INSTRUCTIONS: The project work you are about to view is on "design simulation and analysis of an infrared based measuring device". Please, sit back and study the below research material carefully. This project topic (design simulation and analysis of an infrared based measuring device) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design simulation and analysis of an infrared based measuring device" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design simulation and analysis of an infrared based measuring device" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018



APPROVAL PAGE

This is to certify that the research work, "design simulation and analysis of an infrared based measuring device" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work "design simulation and analysis of an infrared based measuring device" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design simulation and analysis of an infrared based measuring device" visible for everyone, then the complete material on "design simulation and analysis of an infrared based measuring device" is to be ordered for. Happy viewing!!!


ABSTRACT

Infrared thermometry is a mature but dynamic technology that has gained the respect of many industries and institutions. It is an indispensable technique for many temperature measurement applications, and the preferred method for some others. The study is on an infrared based temperature measuring device which uses MLX90614 as Infrared Temperature Sensor . The device utilizes a MLX90614 Infrared Temperature Sensor to detect an object's temperature without any contact at all and to also sense the ambient temperature surrounding this sensor. The results will be displayed in both, degrees Fahrenheit and degrees Celsius on the serial monitor. Many real-world applications uses an infrared temperature sensor to either be an aid for the user or for autonomous monitoring, and some of those applications include: body thermometers, fire detectors, water heaters, room heaters etc.

TABLE OF CONTENTS

 TITLE PAGE

APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
TABLE OF CONTENT

CHAPTER ONE

    1. INTRODUCTION
    2. BACKGROUND OF THE STUDY
    3. PROBLEM STATEMENT
    4. AIM/OBJECTIVE OF THE STUDY
    5. PURPOSE OF THE PROJECT
    6. SIGNIFICANCE OF THE STUDY
    7. APPLICATION OF THE PROJECT
    8.  SCOPE OF THE PROJECT
    9. PROJECT WORK ORGANISATION

CHAPTER TWO
LITERATURE REVIEW
2.0      LITERATURE REVIEW
2.1      HISTORICAL BACKGROUND ANDDEVELOPMENT OF THE STUDY
2.2     PHYSICAL PRINCIPLES OF THERMOMETRY
2.3      THERMOMETRIC MATERIALS
2.4      PRIMARY AND SECONDARY THERMOMETERS
2.5      CALIBRATION OF THERMOMETERS
2.6     REVIEW OF TWO KINDS OF CONVENTIONAL THERMOMETERS
CHAPTER THREE

3.0      METHODOLOGY

3.1      SYSTEM BLOCK DIAGRAM
3.2     
HARDWARE DESCRIPTION
3.3      SYSTEM DESCRIPTION
3.4      CIRCUIT DIAGRAM AND DESCRIPTION
3.5      SOURCE CODE/PROGRAM
3.6      SOURCE CODE/PROGRAM

CHAPTER FOUR

4.0      RESULT ANALYSIS
4.1      CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
4.2      CASING AND PACKAGING
4.3      TESTING OF SYSTEM OPERATION
4.4      BILL OF MATERIALS
CHAPTER FIVE
5.1      CONCLUSIONS
5.2      REFERENCES  

CHAPTER ONE
1.0                                        INTRODUCTION
1.1                            BACKGROUND OF THE STUDY
A thermometer is a device that measures temperature or a temperature gradient. A thermometer has two important elements: (1) a temperature sensor in which some physical change occurs with temperature, and (2) some means of converting this physical change into a numerical value (e.g. the visible scale that is marked on a mercury-in-glass thermometer). Thermometers are widely used in industry to control and regulate processes, in the study of weather, in medicine, and in scientific research.
In daily life, the measurement of body temperature is a basic way to determine the normal life of the human body. Although the price of traditional mercury thermometers is cheap , the existing problems are as follows when it is used: Mercury thermometer must contact with the human body , and temperature measurement process need lasted 5 to 10 minutes, because infants is active, let parents become very headache for infant body temperature; And in the number of temperature meter reading, easy to read wrong due to external light and other factors; Mercury thermometer is easy to rupture when heated or stored improperly, It can lead to mercury poisoning due to human body exposure to mercury [1]. Infrared temperature sensor is used for measuring temperature, The measurement trouble of the traditional contact thermometer is avoided. It is especially suitable for infants and young children to measure the body  temperature ,and the measured temperature is displayed by the liquid crystal display module, it is accurate, and it has the function of voice broadcast, it is convenient for the people with poor eyesight. The main aim of this work is to build an infrared thermometer which is a thermometer which infers temperature from a portion of the thermal radiation sometimes called black-body radiation emitted by the object being measured. This permits temperature measurement from a distance without contact with the object or to be measured.
This configuration facilitates temperature measurement from a distance without contact with the object to be measured. As such, the infrared thermometer is useful for measuring temperature under circumstances where thermocouples or other probe type sensors cannot be used or do not produce accurate data for a variety of reasons.
Some typical circumstances are where the object to be measured is moving; where the object is surrounded by an EM field, as in induction heating; where the object is contained in a vacuum or other controlled atmosphere; or in applications where a fast response is required.
Infrared thermometers allow users to measure temperature in applications where conventional sensors cannot be employed. Specifically, in cases dealing with moving objects ( i.e., rollers, moving machinery, or a conveyor belt), or where non-contact measurements are required because of contamination or hazardous reasons (such as high voltage), where distances are too great, or where the temperatures to be measured are too high for thermocouples or other contact sensors.

1.2                                PROBLEM STATEMENT
Traditionally, thermometer was made to be used and read by making contact with the patient or an object which is to be tested and this wastes lot of time, inefficient and at the same time can expose users to contagious diseases. Also, temperature Sensors like DS18B20, LM35 & MAX6675 are only sense the temperature when the heat is applied to them directly on their surface. But if you wish to measure the temperature of a very hot body like a flame or hot iron, one can’t rely on these sensors.
In order to realize object temperature fast and non-contact measurement, an infrared thermometer is designed. We need some sensors that can measure the temperature without any contact & sensing the temperature through IR is the best method. For this, you can use the MLX90614 infrared thermometer from Melexis for this project. The MLX90614 sensor uses contactless temperature sensing to measure the temperature data without any physical contact to particular surface.

1.3                    AIM / OBJECTIVES OF THE PROJECT
The main aim of this work is to build an infrared based thermometer which is a device used to measure the temperature of any object or living body and displays the reading. A thermometer scale can be in Fahrenheit or Celsius. The objectives of the study are:

  1. To build the prototype model of the system
  2. To maintain high level of hygiene when taking measurement
  3. To ensure efficient and accuracy of measurement.

1.4                       PURPOSE OF THE PROJECT
The main purpose of this work is to carry out a temperature measurement without making contact with the object to be measured.

1.5                      SIGNIFICANCE OF THE PROJECT
Non-contact: No contact guarantees the best hygiene, thereby greatly reducing the risk of being tested and the operator being infected by bacterial viruses.
Efficient and accurate: Simple operation non-contact sensitive, no need to wait accurate measurement.
infrared sensor: Self-develop infrared module accurate to 0.2 celsius stable, fast and accurate strong adaptability 5.5cm infrared filter wide measurement range.
Smart power saving: Supports automatic shutdown Two AAA batteries can be used more than 3000 times.

1.6                              APPLICATIONS OF THE PROJECT
Medical Applications: The non-contact thermometers are used to measure human body temperature around 37C. These thermometers are mostly probe type or ear type. It measures oral, rectal and arm pit body temperature.
Marine Applications: non-contact thermometers with high temperature exhaust gas sensor as the temperature sensor can be used in marine applications for measuring the local temperature.
Industrial Applications: non-contact thermometers are also used in power plants, nuclear power plants, blast furnaces, ship building industries etc. They can measure temperature from -220C to +850C.

1.7                                 SCOPE OF THE PROJECT
The scope of this study covers building an Infrared Thermometer using MLX90614 Infrared Temperature Sensor & Arduino Board. It displays the temperature reading on SSD1306 0.96″ OLED Display.

1.9                           PROJECT WORK ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study,  chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.


CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design simulation and analysis of an infrared based measuring device" is also available. Order full work to download. Chapter two of "design simulation and analysis of an infrared based measuring device" consists of the literature review. In this chapter all the related works on "design simulation and analysis of an infrared based measuring device" were reviewed.

CHAPTER THREE: The complete chapter three of "design simulation and analysis of an infrared based measuring device" of an automated light system using photo-sensitive switch" is available. Order full work to download. Chapter three of "design simulation and analysis of an infrared based measuring device" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design simulation and analysis of an infrared based measuring device" is available. Order full work to download. Chapter four of "design simulation and analysis of an infrared based measuring device" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "design simulation and analysis of an infrared based measuring device" is available. Order full work to download. Chapter five of "design simulation and analysis of an infrared based measuring device" consist of conclusion, recommendation and references.

 

CLICK HERE FOR MORE RELATED TOPICS/MATERIAL


To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions


For more information contact us through any of the following means:

Mobile No phonelogo:+2348146561114 or +2347015391124 [Mr. Innocent]

Email address emailus:engr4project@gmail.com

Watsapp No whatsapp.html :+2348146561114


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp Nowhatsapp.html
:+2348146561114


E
mail Address emailus:engr4project@gmail.com


FOLLOW / VISIT US VIA:

tweeter instagram.htmlfacebook logomyyoutubelogo.html