USER'S INSTRUCTIONS: The project work you are about to view is on ''electricc arc welding machine''. Please, sit back and study the below research material carefully. This project topic ''electricc arc welding machine'' have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this ''electricc arc welding machine'' project research material is to reduce the stress of moving from one school library to another all in the name of searching for ''electricc arc welding machine'' research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

---

APPROVAL PAGE

This is to certify that the research work ''electricc arc welding machine'' by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work ''electricc arc welding machine'' research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of ''electricc arc welding machine'' visible for everyone, then the complete material on ''electricc arc welding machine'' is to be ordered for. Happy viewing!!!

---

CHAPTER ONE

1.0 INTRODUCTION

In the past with the necessary of metals it always seems impossible to join two metals together with grooving riveting, this idea leads to alternative of finding a lasting solution to the problem. This brought about the idea of a welding machine with a well laminated core and coil wound together to form a high rated transformer which is immersed in a can of oil.
Welding is the most economical and efficient way to join metals permanently. It is the only way of joining two or more pieces of metal permanently to make a single piece. Welding is vital to our economy.
It is even said that over (50%) of the gross nation product of the industries is related to welding in one way or the other. Welding ranks high economy industrial process and involve more science and variable than those involved in any other industrial process.
The electrode is either a rod that simply carried current between the tip of the tong and the work, or a rod or wire that melts and supplies, fill metal to the joint.
The basic arc welding circuit is an alternating current (A.C) or direct current (D.C) power source connected by a “hot” cable to an electrode, when the electrode is positioned close to the work piece, an arc is created across the gap between the metal and the hot cable electrode. An ionized column of gas developed to complete the circuit.

1.1     BREIEF HISTORY AND HISTORICAL BACKGROUND
Arc welding did not come into practice until much later. In 1802, “Vasily Petrov” discovered the continuous electric Arc and subsequently proposed its possible practical applications including welding. The French electrical inventor “Auguste Demeritens” produced first carbon arc touch, patented in 1881, which was successfully used for welding leading in the manufacturer of lead-acid batteries. In 1881-1882 a Russian inventor “Nikolai Bernardo” created the electric arc welding method for steel known as carbon arc welding, using carbon electrode. (Lincoln Electric 1994), the procedure hand book of arc welding, Cleceland Ohiho Lincoln Electric ISBN 99949-25-82-2. The advance in arc welding contacted with the inventor of metal electrode in the late 19th century by a Russian, “Nikolai Slavyanov” 1888 and an American, “C.L coffin”. Around 1900 A.P strotimenger released in Britain a coated metal electrode which gave more stable arc, in 1905 Russian scientist “Vladimir Mitevich” proposed the usage of three phase electric arc for welding.
In 1919 the alternating current welding was invented by “C.J Hoslag” not become popular for another decade. Competing welding process such as resistance welding and oxy-fuel welding were developed during this especially the later, faced stiff competition from arc welding especially after metal coving (known as flux) for the electrode to stabilized the arc and shield the base material from impurities continued to be developed.
The arc welding was not common until during world war I, welding started to be used in ship building in Great Brittan in place of riveted steel plates. The Americans also became more of accepting of the new technology when the process allowed them to repair their ships quickly after a German attack in the New York Harbor at the beginning of the war. Even in the good old days, Nigeria make use of forgoing whereby two pieces of metal are join together by heating them to a high temperature ant then hammering them together (forge welding).
In 1919 the British ship builder “Cammel Laird” started construction of merchant ship, the fillager, with entire welding hill, she was launched in 1921.
During the following decade, further advanced allowed for the welding of reactive such as aluminum and magnesium, this in conjunction with the development in automatic welding, alternating current, flux fed a major expansion of arc welding during the 1930’s and then during world war two after decades of development, was finally perfected in 1941 and gas metal arc welding followed in 1948, allowing for fast welding of non-ferrous material but required more expensive shielding gases. Using a consumable electrode and a carbondioxide atmosphere as shielding gas. It quickly becoming to most popular arc welding process , in 1957. The flux cored arc welding process debuted in which the self-shielded wire automatic equipment, resulting in greatly increased welding speeds. In that same year plastic arc welding was invented. Electro slag welding as released in1958 and was followed by it cousin, electro-gas welding in 1961.

1.2     LITERATURE REVIEW
This write up is fully based on the method and ways of carrying out welding work and construction of the machine. Welding is a fabrication or sculptural process that joins material usually metals or thermoplastics, by causing fusion, which is distinct from the lower temperature metal. Joining techniques such as brazing or soldering which do not melt the base metal. The value of welding as a standard method of joining metal was not fully appreciated before world war one, then because of the need for speed of production in every metal using and metal fabrication industry, the order of welding processes came on their own. During and after world war two, the new welding method were developed, which further increased speed and facilitates the joining of the many special purpose alloys that were developed during this period.
Limited in its early application to small or less important parts, welding in the second half of the 20th century was employed in fabrication too numerous to mention, such as ship, locomotives, rail and cars. The petroleum industry is a classic example. The cutting edge of the bit used to drill on wells consist of a hard weld metal fused to backing transportation to and from refinery is via all welded transport iron material.
Whenever a piece of apparatus is intended to contain a liquid or gas, welding is the logical method of fabrication. As such, it has almost completely replaced other method. Welding as of course by no means of confined to wide application where leak tightness is involved. In the conventional body on frame automobile, there are some 8,000 to 10,000 resistance welds and up to 40ft of arc welding.
Building and bridges can be erected y welding with a saving of (10%) to (20%) in the amount of steel requires. The proportion of structures erected by welding was increasing in the second half of the 20th century and trend appeared likely to continue.
The processes of welding may be divided into four processes

• Forge welding
• Arc welding
• Gas welding
• Resistance welding

Arc welding will be expansiated on, in accordance to the title of the project.

1.3     OBJECTIVES OF THE PRESENT WORK

• To find alternative replacement replacement for the imported models.
• To make it affordable at relatively cheap price.
• To further understand the fabrication or construction/working principle of the machine.
• To acquire basic understanding of operating and welding of transformer.

1.4     SCOPE OF ELECTRICC ARC WELDING MACHINE
The machine is designed to be supplied with an input ranging from 220volt to 240 volt. A good weld must be strong as parent metal. The scope of welding process in the modern industries has taken a greater dimension more than the previous year. Today the science and act of welding involves a wide range of process and procedure applicable to materials of any thickness and shape. These may range from more a very thin electronic component to a large machine and structure. The arc produces a temperature of about 3600oc at the top armed melts part of the metal being welded and part of electrode. This produces a pool of molten metal that cools and solidifies behind electrode as it moved along the joint.
This electric arc welding machine is a heavy duty machine which is capable of welding 12 gauges of electrodes while in operation.

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of ''electricc arc welding machine''is also available. Order full work to download. Chapter two of ''electricc arc welding machine'' consists of the literature review. In this chapter all the related work on ''electricc arc welding machine''was reviewed.

CHAPTER THREE: The complete chapter three of ''electricc arc welding machine'' is available. Order full work to download. Chapter three of ''electricc arc welding machine'' detector consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of ''electricc arc welding machine'' is available. Order full work to download. Chapter four of ''electricc arc welding machine'' detector consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of ''electricc arc welding machine'' is available. Order full work to download. Chapter five of ''electricc arc welding machine'' detector consist of conclusion, recommendation and references.

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: