USER'S INSTRUCTIONS: The project work you are about to view is on "fabrication of a 200w 24v monocrystalline solar panel" Please, sit back and study the below research material carefully. This project topic "fabrication of a 200w 24v monocrystalline solar panel" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "fabrication of a 200w 24v monocrystalline solar panel" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "fabrication of a 200w 24v monocrystalline solar panel" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

FABRICATION OF A 200W 24V MONOCRYSTALLINE SOLAR PANEL

BY

---
EE/H2013/01430
DEPARTMENT OF
SCHOOL OF
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, "fabrication of a 200w 24v monocrystalline solar panel" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a B.Sc on ... has been approved.

By
Dr. ---                                                    Dr. ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
 Dr. ---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work “fabrication of a 200w 24v monocrystalline solar panel” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” visible for everyone, then the complete material on “the rate and causes of infant mortality in edo state (case study of irrua specialist teaching hospital)” is to be ordered for. Happy viewing!!!

---

This work is on fabrication of a 200W/24V monocrystalline solar panel. Monocrystalline solar panel converts the variable direct current (DC) output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be fed into a commercial electrical grid or used by a local, off-grid electrical network. It is a critical component in a photovoltaic system, allowing the use of ordinary AC-powered equipment.
In solar energy, monocrystalline solar panel produce direct electricity with the help of electrons that are moving from negative to positive direction. Most of the appliances that we use at home work on alternative current. This AC is created by the constant back and forth of the electrons from negative to positive. In AC electricity the voltage can be adjusted according to the use of the appliance.  As solar panels only produce Direct current the solar inverter is used to convert the DC to AC.
                                                                                                                                      

CHAPTER ONE
1.0                                                        INTRODUCTION
1.1                                           BACKGROUND OF THE STUDY
Solar panels produce direct electricity with the help of electrons that are moving from negative to positive direction. Most of the appliances that we use at home work on alternative current. This AC is created by the constant back and forth of the electrons from negative to positive. In AC electricity the voltage can be adjusted according to the use of the appliance.  As monocrystalline solar panel only produce Direct current the solar inverter is used to convert the DC to AC.
An inverter produces square waves or a sine wave which can be used for running lights, televisions, lights, motors etc. However these inverters also produce harmonic distortion. Expensive inverters make use of lots of steps to produce a sine wave and thus are found in residential solar inverters. Basically inverters should be a large one so that it supplies enough power to all the necessary appliances.
A monocrystalline solar panel is similar to a normal electric inverter but uses the energy of the Sun, that is, Solar energy. A monocrystalline solar panel with inverter helps in converting the direct current into alternate current with the help of solar power. Direct power is that power which runs in one direction inside the circuit and helps in supplying current when there is no electricity. Direct currents are used for small appliance like mobile e phones, MP3 players, IPod etc. where there is power stored in the form of battery. In case of alternative current it is the power that runs back and forth inside the circuit. The alternate power is generally used for house hold appliances. A monocrystalline solar panel helps devices that run on DC power to run in AC power so that the user makes use of the AC power. Solar energy is preferable to other source of energy because it makes use of the solar energy which is available in abundant from the Sun and is clean and pollution free.
monocrystalline solar panel with inverters are also called as photovoltaic solar inverters. These devices can help you save lot of money.  The small-scale grid  one have just two components i.e. the panels and inverter while  the off grid systems are complicated and consists of batteries which allows users to use appliances during the night when there is no Sunlight available.  The monocrystalline solar panel and the batteries that are placed on rooftops attract Sun rays and then convert the Sunlight into electricity. The batteries too grab the extra electricity so that it can then be used to run appliances at night.

1.2                                               PROBLEM STATEMENT
As a result of continuous power failure and fluctuation in power supply by Power Holding Company of Nigeria (PHCN), sensitive appliances and system are affected by interruption power supply and also the blackout also affect human generally in that it takes away our happiness. Then, this project is to provide a back-up and reliable power supply of 200W from a renewable energy source (solar panel) to power some selected home appliances such as computers, television set, lighting systems.

1.3                                        AIM/OBJECTIVE OF THE PROJECT
The main objective of the study is to fabricate a device that can collect an input dc voltage from the monocrystalline solar panel and convert it to 220vac output which can be use to power ac appliances. This device delivers an output power of 200w to a load.

1.4                                              PURPOSE OF THE PROJECT
The purpose of this work is to transform direct current (DC) generated by a PV system into alternating current (AC), which can be sent into an AC appliances. This device can be used either in concert with battery systems or to directly power certain devices.

•                                    SIGNIFICANCE OF THE PROJECT
• monocrystalline solar panel has always helped in reducing global warming and green house effect.
• Also use of monocrystalline solar panel helps in saving money many people have started using solar based devices
• A monocrystalline solar panel helps in converting the Direct current into batteries or alternative current. This helps people who use limited amount of electricity.
• Apart from solar inverters there are other devices too that make use of monocrystalline solar panel namely, solar cooker, heater.
• monocrystalline solar panel are the best way and they are better than the normal electric ones. Also their maintenance does not cost much money

1.6                                           LIMITATION OF THE PROJECT

• Initially you need to shell out a lot of money for buying a solar inverter. It will work effectively and produce direct current only when the Sunlight is strong.
• The monocrystalline solar panel that are used to attract Sunlight requires lots of space
• The device can work efficiently only if the presence of the Sun is strong.
• monocrystalline solar panel produces  24v output.

1.7                                                 SCOPE OF THE PROJECT
The main function of monocrystalline solar panel is to convert battery's Direct Current (DC) into Alternative Current (AC) to feed home compliances.
Solar energy consisted of monocrystalline solar panel, charger controllers, inverters and rechargeable batteries, while solar DC power system is not included inverters. The inverter is a power conversion device, which can be divided into self-excited oscillation inverter and external excited oscillation inverter.

1.8                                         METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

• Study of the previous work on the project so as to improve it efficiency.
• Draw a block diagram.
• Test for continuity of components and devices,
• Design and calculation for the device was carried out.
• Studying of various component used in circuit.
• Construction of the device was carried out.
• Finally, the whole device was cased and final test was carried out.

1.9                                                         PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work,  chapter two presents the literature review of the study,  chapter three describes the methods applied,  chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.

CHAPTER TWO: The complete chapter two of “fabrication of a 200w 24v monocrystalline solar panel” is available. Order full work to download. Chapter two of “fabrication of a 200w 24v monocrystalline solar panel” consists of the literature review. In this chapter all the related work on “fabrication of a 200w 24v monocrystalline solar panel"

CHAPTER THREE: The complete chapter three of “fabrication of a 200w 24v monocrystalline solar panel” is available. Order full work to download. Chapter three of “fabrication of a 200w 24v monocrystalline solar panel” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of fabrication of a 200w 24v monocrystalline solar panel” is available. Order full work to download. Chapter four of “fabrication of a 200w 24v monocrystalline solar panel” consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a “fabrication of a 200w 24v monocrystalline solar panel” is available. Order full work to download. Chapter five of “fabrication of a 200w 24v monocrystalline solar panel” consist of conclusion, recommendation and references.

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.

---

For more information contact us through Any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com

---

IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.