USER'S INSTRUCTIONS: The project work you are about to view is on "fabrication of electrical pop corn machine" . Please, sit back and study the below research material carefully. This project topic "fabrication of electrical pop corn machine" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "fabrication of electrical pop corn machine" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "fabrication of electrical pop corn machine" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
APPROVAL PAGE
This is to certify that the research work, "fabrication of electrical pop corn machine" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "fabrication of electrical pop corn machine" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "fabrication of electrical pop corn machine" visible for everyone, then the complete material on "fabrication of electrical pop corn machine" is to be ordered for. Happy viewing!!!
An electric pop corn machine is a machine that is used to pop com for human consumption. It uses electricity as its source of energy, transfer heat energy, that is used to rotate due to the convention of electrical energy from the source to mechanical energy in the motor, the stirrer turns the corn so that it will not burns. This project went as far as meeting most of the requirement of advancement in technology, which lead to make work easy and comfortable for the user.
To be candid, the burden of mankind because of the existence of technology for this reasons, the government is expected to encourage the young technologist and engineers who has graduated and those who are yet to be graduated from school. By providing them with financial assistance, installation of functional and adequate equipment and facility various installations, competent and qualified personnel and in addition making education free for those who are not financially buoyant. By so doing, we will be boasting of technological advancement if we are ready to adopt indigenous technical experience rather than that of western one, which rather more expansion and at-time in appropriate.
This project is divided into five chapters, chapter one: introduction, literature review, specification of problem which include requirement of the design, condition for use, characteristic, appearance.
Chapter two: Description of components parts, Body frame work and various types of heating element and material needed for construction.
Chapter three: comprises assembly, principles of operation and control.
Chapter four: Precaution and theory of analysis.
Chapter five: recommendation and conclusion together with references.
TABLE OF CONTENTS
Title Page i
Certification ii
Dedication iii
Acknowledgement vi
Abstract v
Table of contents vii
CHAPTER ONE
INTRODUCTION
- The Background of the Project 1
- Literature Review 1
- Specification of Problems 2
- Requirement of Design 2
- Condition for Use 2
- Characteristics 3
- Appearance 3
CHAPTER TWO
2.1 Description of component part 5
2.2 Body frame work 5
2.3 Material needed for construction 7
2.4 Various types of heating element 8
2.4.1 A pan with a lid on it 9
2.4.2 Microwave pop corn machine 9
2.4.3 An open fire pop corn machine 10
2.4.4 Hot air pop corn machine 11
2.4.5 Manually operated pop corn machine 11
2.4.6 Electrically operated pop corn machine 11
2.5 Best of the project 12
CHAPTER THREE
3.1 Assembly and finishing 13
3.2 Principles of operation and control of pop corn machine 14
3.2.1 The aluminum pot 14
3.2.2 Lifting mechanism 14
3.2.3 The stirring mechanism 15
3.2.4 Principle of operation 15
CHAPTER FOUR
4.1 Precaution 17
4.2 Theory of design and analysis 17
CHAPTER FIVE
CONCLUSION AND RECOMMENDATION 19
5.1 Conclusion 19
5.2 Recommendation 19
REFERENCES 21
CHAPTER ONE
1.0 INTRODUCTION
1.1 The Background of The Project
The basic aim of this project is to improve the quality and standard of production of a pop-corn machine and how its producing the popcorn.
Therefore, it act or promote and improve production rate and limit the frying time, as much as it could performed and lastly production it in a sanitary condition.
The design and construction of pop corn machine is brought from the perspective of its availability in market.
Also this project is also a means of promoting the diversity in utilization to suit different taste.
This is the past related work that has been carried out before this project and which are relevant to this project.
Therefore, for the past few years, several processes have been proposed for producing pop-corn machine in commercial use other than local ones i.e (Electrically popcorn machine and natural fire of heat pop corn machine).
1.2 Specification of Problem
The design is expected to achieve the following objective:-
- Production of pop corn in long scale
- Increase the efficiency of producing pop corn
- Moderate the rotation of the stirrer by using right motor
- To reduce the heat that will be lost by logging the out put
- To regulate the voltage used to produce popcorn
- The presence of bulb to enhance production at night
- Condition For Use
- The machine might be used under elevated temperature
- The machine should be store after used in a clean and dry place
- Routines clean would be necessary to avoid rusting of the pot
- The motor should be service from time to time to maintain its efficiency
1.3.3 Characteristic
The machine should not be heavy, the machine should not be big to enhance effecting stirring. The distance between the pots should not be too large to reduce heat loss. Aluminum should be used for both the frame profile and the construction of the stirrer. Glass should be used due to the case because of the transparency.
1.3.4 Appearance
The product should have a glistening appearance which can attract the prospective consumer of the pop corn.
Reliability and life
The expected useful life in normal circumstances should be less than 10 years.
LIMITATION
- There was no conveyor that should remove the popcorn from the hot pot
- There was no time to indicate when the corn is fully popped
- There was no thermostat to regulate the temperature of the system
CHAPTER FIVE
CONCLUSION AND RECOMMENDATIONS
5.1 Conclusion
- After testing the machine, we discovered that we are able to pop higher amount of popped coin due to the fact that pot is bigger than the previous ones constructed.
- Stirrer touches all the botton part of the pot
- A detachable container is constructed so as to reduce the wastage of pop-corn when transferring from pot to the containers.
Also my conclusions give me the room for production of high demand of pop-corn
5.2 Recommendation
From the experience and the operation carried out during the process of this project is here by Recommended that, process of the pop‑ corn machine is made to be electrically operated for popping of corn.
- Also, in order to improve effective and high standard reputable project, continue improvement should be constantly made
- It is recommended that project for every out going student should make it in a way such that it will meet the standard of improved ones.
- The container should be well lagged so that heat transfer by conductive from the heating element will be reduce.
- The polytechnic and departmental authority should make more buildings available necessary machine and the maintenance of this machine for engineering student should be provided. Most especially the Mechanical Engineering student.
- In view of the problems, recommendation and suggestions can be made, that the institution authority should build more workshop and provide necessary and enough equipment and machines because it is my hope that this project would meet the needs of students, industries and other research centre in their quest for basic training on production, fabrication and operations of pop‑ corn machine.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "fabrication of electrical pop corn machine" is also available. Order full work to download. Chapter two of "fabrication of electrical pop corn machine" consists of the literature review. In this chapter all the related work on "fabrication of electrical pop corn machine" was reviewed.
CHAPTER THREE: The complete chapter three of "fabrication of electrical pop corn machine" is available. Order full work to download. Chapter three of "fabrication of electrical pop corn machine" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "fabrication of electrical pop corn machine" is available. Order full work to download. Chapter four of "fabrication of electrical pop corn machine" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of "fabrication of electrical pop corn machine" is available. Order full work to download. Chapter five of "fabrication of electrical pop corn machine" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
