USER'S INSTRUCTIONS: The project work you are about to view is on "fabrication of electrical pop corn machine". Please, sit back and study the below research material carefully. This project topic (fabrication of electrical pop corn machine) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "fabrication of electrical pop corn machine" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "fabrication of electrical pop corn machine" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, "fabrication of electrical pop corn machine" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "fabrication of electrical pop corn machine" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of ""fabrication of electrical pop corn machine" visible for everyone, then the complete material on "fabrication of electrical pop corn machine" is to be ordered for. Happy viewing!!!

---

An electric pop corn machine is a machine that is used to pop com for human consumption. It uses electricity as its source of energy, transfer heat energy, that is used to rotate due to the convention of electrical energy from the source to mechanical energy in the motor, the stirrer turns the corn so that it will not burns.
This project went as far as meeting most of the requirement of advancement in technology, which lead to make work easy and comfortable for the user.
To be candid, the burden of mankind because of the existence of technology for this reasons, the government is expected to encourage the young technologist and engineers who has graduated and those who are yet to be graduated from school. By providing them with financial assistance, installation of functional and adequate equipment and facility various installations, competent and qualified personnel and in addition making education free for those who are not financially buoyant. By so doing, we will be boasting of technological advancement if we are ready to adopt indigenous technical experience rather than that of western one, which rather more expansion and at-time in appropriate.   
This project is divided into five chapters, chapter one: introduction, literature review, specification of problem which include requirement of the design, condition for use, characteristic, appearance.
Chapter two: Description of components parts, Body frame work and various types of heating element and material needed for construction.
Chapter three: comprises assembly, principles of operation and control.
Chapter four: Precaution and theory of analysis.
Chapter five: recommendation and conclusion together with references.    

TABLE OF CONTENTS
Title Page                                                                         i
Certification                                                                     ii
Dedication                                                                       iii
Acknowledgement                                                            vi
Abstract                                                                           v
Table of contents                                                             vii
CHAPTER ONE
INTRODUCTION

• The Background of the Project                                 1
• Literature Review                                                     1
• Specification of Problems                                         2
• Requirement of Design                                             2
• Condition for Use                                                     2
• Characteristics                                                         3
• Appearance                                                              3

CHAPTER TWO
2.1 Description of component part                                  5
2.2 Body frame work                                                                5
2.3 Material needed for construction                                       7
2.4 Various types of heating element                                       8
2.4.1 A pan with a lid on it                                              9
2.4.2 Microwave pop corn machine                                 9
2.4.3 An open fire pop corn machine                                       10
2.4.4 Hot air pop corn machine                                               11
2.4.5 Manually operated pop corn machine                     11
2.4.6 Electrically operated pop corn machine                  11   
2.5 Best of the project                                                      12
CHAPTER THREE
3.1 Assembly and finishing                                             13
3.2 Principles of operation and control of pop corn machine 14
3.2.1 The aluminum pot                                                  14
3.2.2 Lifting mechanism                                                  14
3.2.3 The stirring mechanism                                          15
3.2.4 Principle of operation                                              15
CHAPTER FOUR
4.1 Precaution                                                                 17
4.2 Theory of design and analysis                                    17
CHAPTER FIVE
CONCLUSION AND RECOMMENDATION                         19
5.1 Conclusion                                                                19
5.2 Recommendation                                                       19
REFERENCES                                                         21

CHAPTER ONE
INTRODUCTION

• The Background of The Project

The basic aim of this project is to improve the quality and standard of production of a pop-corn machine and how its producing the popcorn.
Therefore, it act or promote and improve production rate and limit the frying time, as much as it could performed and lastly production it in a sanitary condition.
The design and construction of pop corn machine is brought from the perspective of its availability in market.
Also this project is also a means of promoting the diversity in utilization to suit different taste.
1.2   This is the past related work that has been carried out before this project and which are relevant to this project.
Therefore, for the past few years, several processes have been proposed for producing pop-corn machine in commercial use other than local ones i.e (Electrically popcorn machine and natural fire of heat pop corn machine).

• Specification of Problem
• Requirement of the Design

The design is expected to achieve the following objective:-

• Production of pop corn in long scale
• Increase the efficiency of producing pop corn
• Moderate the rotation of the stirrer by using right motor
• To reduce the heat that will be lost by logging the out put
• To regulate the voltage used to produce popcorn
• The presence of bulb to enhance production at night
• Condition For Use
• The machine might be used under elevated temperature
• The machine should be store after used in a clean and dry place
• Routines clean would be necessary to avoid rusting of the pot
• The motor should be service from time  to time to maintain its efficiency

1.3.3 Characteristic
The machine should not be heavy, the machine should not be big to enhance effecting stirring. The distance between the pots should not be too large to reduce heat loss. Aluminum should be used for both the frame profile and the construction of the stirrer. Glass should be used due to the case because of the transparency.
1.3.4 Appearance
The product should have a glistening appearance which can attract the prospective consumer of the pop corn.
Reliability and life
The expected useful life in normal circumstances should be less than 10 years.
 LIMITATION

• There was no conveyor that should remove the popcorn from the hot pot
• There was no time to indicate when the corn is fully popped
• There was no thermostat to regulate the temperature of the system
• There was nothing like lagging to trap some of the heat

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "fabrication of electrical pop corn machine" is also available. Order full work to download. Chapter two of "fabrication of electrical pop corn machine" consists of the literature review. In this chapter all the related works on ""fabrication of electrical pop corn machine were reviewed.

CHAPTER THREE: The complete chapter three of "fabrication of electrical pop corn machine" is available. Order full work to download. Chapter three of "fabrication of electrical pop corn machine" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "fabrication of electrical pop corn machine" is available. Order full work to download. Chapter four of "fabrication of electrical pop corn machine" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a "fabrication of electrical pop corn machine" is available. Order full work to download. Chapter five of "fabrication of electrical pop corn machine" consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

Visit the link below to see our recent works, and SUBSCRIBE to receive notification for our electronics teachings and practicals.

https://www.youtube.com/channel/UChY9Z1-egigJbYjYnapd0nw

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: