FABRICATION OF TWIN LEAF METAL DOOR
USER'S INSTRUCTIONS: The project work you are about to view is on "fabrication of twin leaf metal door". Please, sit back and study the below research material carefully. This project topic (fabrication of twin leaf metal door) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "fabrication of twin leaf metal door" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "fabrication of twin leaf metal door" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
BY
---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "fabrication of twin leaf metal door" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "fabrication of twin leaf metal door" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of ""fabrication of twin leaf metal door visible for everyone, then the complete material on "fabrication of twin leaf metal door" is to be ordered for. Happy viewing!!!
This project report is based on fabrication of twin leaf metal door. A mental door is a movable structure used to close off an entrance typically consisting of a panel that swings on lings, side or rotate.
This metal door more reliable and strong and has much good looking appearance than other doors like, wooden door, glass door, leather door e.t.c various fabrication processes such as: marking out, cutting, bending, joining or welding, grinding, spraying e.t.c were adopted and implemented in the fabrication of this twin leaf metal door. Peep hole was fixed on the door to screw visitor and admit on choice, the main purpose is to ensure safety and protection.
The material used to make this protect to be well strong design are as follows-galvanised metal plate, square pipe lock set key paint, hinges, guage 12 electrode and grinding disk and the major reason of using the material is to provide good making features of the door which will meet up with nowadays demand and designs, and in order to expose students to how to use different types of simple tools and some machines. The special features on the door are as follows: pin hole glass, lock set key, hinges small, square pipe design, glass paint use to coat the door for rusting.
TABLE OF CONTENT
Title page
Certification
Dedication
Acknowledgement
Abstract
Table of content
List of figure
Nomenclature
CHAPTER ONE
Introduction
1.1 Background of the study
1.2 Literature review
1.3 Aim
1.4 Objectives of the project
CHAPTER TWO
ANALYSIS OF ALTERNATIVE METHOD AND CHOICE OF BEST ALTERNATIVE.
2.1 Definition of door
2.2 Types of door
2.3.1 Advantage of metal door opening
2.3.2 Advantage of metal door closure
2.4 Definition of welding
2.5 Types of welding
5.4 Welding operation
5.5 Types of welding operation
5.6 Safety operation
5.7.1 Welding equipment
5.7.2 Electrode Holder
5.8 Precautionary measures against other Risks
5.9 Finishing Touches
5.10 Maintenance
5.11 Problem Encountered
5.12 Bills of Engineering measurement and Evaluation
CHAPTER SIX
CONCLUSION AND RECOMMENDATION
6.1 Conclusion
6.2 Recommendation
References
CHAPTER ONE
1.1 BACKGROUND OF THE STUDY
Many years ago, different types of door were in use which includes doors were either by wood or grass. These doors were made then to meet the purpose of security both life and property. It was later discovered that doors made with wood do not last long.
They have a short life span. More so, they are not durable they go demanded very easily and quickly and they cannot with stand high degree of strain.
Doors made with wood are very risky to be put at open place, this is because doors made with wood when faced with water frequently. It get demand. In addition, termites could make the life span of wooden short.
Also, considering the rate of which armed robber break into house in our society, one would agree. That wooden door gave then the to do so because, it could easily be damaged.
Meanwhile, based on the informational realms and also the urged to improve technologically, so as technologist in training, we have of come up with a design to serve as an alternative mean of making doors of different patterns of today. The pattern that seem to give doors a long of man and properties.
1.2 LITERATURE REVIEW
Many years ago, doors were made with either wood or grasses the general purpose of serves as a mean of secreting both lives and properties and also serve as a feature of any building.
When open, they admit ventilation and light. Doors used to control the physical atmosphere within a space by enclosing the air draft, so that interiors may be more effectively heated or cooled. Door are significant in preventing the spread of fire they are also as barrier for esthetic, keeping formal and utility area separates. Door are usually different in most places, due to chance of temperature and humidity, doors usually have to be framed. The Greeks and Romans used many styles of doors single, double sliding of folding the doors as well as many other found throughout Europe’s past were made of brome. This seemed to be going material used and purpose of doors.
1.3 AIMS AND OBJECTIVES
1. To over come the problem of short life span of doors
2. To reduce the risk of human life and properties cause by wooden and grass door during burglary.
3. To change the local method of door design to the modern method e.g wooden door to metal door
4. To allow student to be more expose to use of some complex machine in the workshop and basic workshop procedure
5. To beautify the building
6. To produce decent, stronger and well designed types of door by using metal.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "fabrication of twin leaf metal door" is also available. Order full work to download. Chapter two of "fabrication of twin leaf metal door" consists of the literature review. In this chapter all the related works on "fabrication of twin leaf metal door" were reviewed.
CHAPTER THREE: The complete chapter three of "fabrication of twin leaf metal door" is available. Order full work to download. Chapter three of "fabrication of twin leaf metal door" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "fabrication of twin leaf metal door" is available. Order full work to download. Chapter four of "fabrication of twin leaf metal door" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a "fabrication of twin leaf metal door" is available. Order full work to download. Chapter five of "fabrication of twin leaf metal door" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
Visit the link below to see our recent works, and SUBSCRIBE to receive notification for our electronics teachings and practicals.
https://www.youtube.com/channel/UChY9Z1-egigJbYjYnapd0nw
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
