phonelogo+234 8146561114 or +2347015391124
INSTALLATION OF AN AUTOMATIC WATER PUMP CONTROLLER

USER'S INSTRUCTIONS: The project work you are about to view is on "installation of an automatic water pump controller". Please, sit back and study the below research material carefully. This project topic "installation of an automatic water pump controller" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "installation of an automatic water pump controller" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "installation of an automatic water pump controller" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---



APPROVAL PAGE

This is to certify that the research work, "AA" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work "installation of an automatic water pump controller" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "installation of an automatic water pump controller" visible for everyone, then the complete material on "installation of an automatic water pump controller" is to be ordered for. Happy viewing!!!


ABSTRACT

In countries including such as Nigeria, a city water authority supplies the clean water and pumps it into large ground-level storage tanks. A resident’s water pump then pumps the water to a water tank on top of his/her house. When the water level in the ground-level storage tank becomes too low, the pump siphons air and shuts down, requiring a resident to manually prime the water pump to get it running again. Residents struggle to monitor the water level of the tanks effectively and keep the pump running properly. To remedy the issue, the Automatic Water Pump Controller (AWPC) system monitors the water levels and controls the pump as necessary to prevent breakdown and maximize water storage without overfilling the rooftop tank and wasting water.

TABLE OF CONTENT
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE

  1. INTRODUCTION
    1. BACKGROUND OF THE PROJECT
    2. PROBLEM STATEMENT
    3. AIM AND OBJECTIVE OF THE PROJECT
    4. SCOPE OF THE PROJECT
    5. APPLICATION OF THE PROJECT
    6. PROJECT JUSTIFICATION
    7. PROJECT ORGANIZATION

CHAPTER TWO
2.0     LITERATURE REVIEW
2.1     INTRODUCTION
2.2      OVERVIEW OF THE STUDY
2.3      REVIEW OF RELATED STUDIES
2.4      REVIEW OF DIFFERENT TYPES OF WATER SENSOR
2.5      REVIEW OF THE PROPOSED STUDY
CHAPTER THREE
3.0     METHODOLOGY
3.1     SYSTEM DESCRIPTION
3.2     PICTORIAL DIAGRAM
3.3     INSTALLATION TOOLS REQUIRED
3.4     INSTALLATION PROCEDURE
CHAPTER FOUR
4.0     TEST AND RESULT ANALYSIS
CHAPTER FIVE
5.1     CONCLUSION
5.2     RECOMMENDATION
5.3     REFERENCES

  

CHAPTER ONE
1.0                                          INTRODUCTION
The Water Level Controller System is an Electronic Equipment which when electrically connected to the starter of any given pump -set motor will control the operation of the pump- set depending upon the water level in the Source and Destination Storage Tanks. It Switches ON the Pump-set when Water level drops below pre-set level in Overhead Tank, Switches OFF the Pump-set when Water level in Overhead Tank becomes full ,Switches OFF the Pump-set when Water level is low in tank , and Switches ON the Pump-set when there is sufficient water in the tank.
Automatic water level controller circuit is a engineering project. It can automatically switch ON and OFF the domestic water pump set depending on the tank water level. You can implement this motor driver circuit at your home or college using less costly components. The main advantage of this water level controller circuit is that it automatically controls the water pump without any user interaction.
The automatic pump controller eliminates the need for any manual switching of pumps installed for the purpose of pumping water from a reservoir to an overhead tank. It automatically switches on the pump when the water level in the tank falls below a certain low level, provided the water level in the reservoir is above a certain level . Subsequently, as the water level in the tank rises to an upper level (M), the pump switched off automatically. The pump is turned on again only when the water level again falls below level in the tank, provided the level in the reservoir is above R. This automated action continues.
1.1                           BACKGROUNDOF THE PROJECT
The project “automatic water level control with an automatic pump control system” is design to monitor the level of liquid in the tank. The system has an automatic pumping system attached to it so as to refill the tank once the liquid gets to the lower threshold, while offing the pump once the liquid gets to the higher threshold. Sustainability of available water resource in many reason of the word is now a dominant issue. This problem is quietly related to poor water allocation, inefficient use, and lack of adequate and integrated water management. Water is commonly used for agriculture, industry, and domestic consumption. Therefore, efficient use and water monitoring are potential constraint for home or office water management system. Moreover, the common method of level control for home appliance is simply to start the feed pump at a low level and allow it to run until a higher water level is reached in the water tank. This water level control, controls monitor and maintain the water level in the overhead tank and ensures the continuous flow of water round the clock without the stress of going to switch the pump ON or OFF thereby saving time, energy, water, and prevent the pump from overworking Besides this, liquid level control systems are widely used for monitoring of liquid levels in reservoirs, silos. Proper monitoring is needed to ensure water sustainability is actually being reached with disbursement linked to sensing and automation.
1.2                                   PROBLEM STATEMENT
This project is carried out so as to provide an easy means of Installing of our water level controller system is not a major task and we have made the system in such a way that it is possible to install the system yourself with minimum electrical knowledge or with the help of a simple electrician.
1.3                    AIM AND OBJECTIVES OF THE PROJECT
The main aim of this work is to carry out a research on how to install an automatic water level controller. The objectives of the study are:

  1. To provide an easy means of installing water pump motor.
  2. To get acquainted to automatic switching ON of  overhead tank (OHT) when water falls below the lower limit.
  3. To avoid damages on the water controller due to wrong installation

1.4                          JUSTIFICATIONOF THE PROJECT
Automatic water level monitor came into existence because of human error and inconsistence that is associated with manually operated water pumping machine, and there different designs of water pump controller but all the designs has the same installation procedures. It has been observed that many people finds it difficult to install a water pump whenever they purpose it even when the user’s operating manual is been giving to them. The study was designed to create an avenue where the user of the device can get install an automatic water level controller without or little assistance from an electrician
1.5                                       APPLICATION OF THE PROJECT
They are useful devices and play an important role in various industries such as automobile, irrigation, and also at homes, or wherever water is pump either underground or overhead.
1.6                                              SCOPE OF THE PROJECT
The project was design to automatically control the pump which ensures constant reserve of water in the reservoir. The scope of the work covers studying how to install automated water pump controller. The task of installation comprises of two parts, the Power Connection and the Sensing Connection. The Power Connection is the connection between the Water Level Controller and your existing Starter with which you are presently operating the Pumpset. The Single Phase Borewells will usually have a starter with start capacitors and run capacitors inside. The starter will have voltage and current meters with ON and OFF Push Buttons on the Door of the Panel. To Control such starters the control wiring will be done only to the ON and OFF Push Buttons. But when automated water controller is implemented it will involve using sensors to control the ON and OFF of the water pump.


CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "installation of an automatic water pump controller" is also available. Order full work to download. Chapter two of "installation of an automatic water pump controller" consists of the literature review. In this chapter all the related work on "installation of an automatic water pump controller" was reviewed.

CHAPTER THREE: The complete chapter three of "installation of an automatic water pump controller" is available. Order full work to download. Chapter three of "installation of an automatic water pump controller" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "installation of an automatic water pump controller" is available. Order full work to download. Chapter four of "installation of an automatic water pump controller" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "installation of an automatic water pump controller" is available. Order full work to download. Chapter five of "installation of an automatic water pump controller" consist of conclusion, recommendation and references.

 

CLICK HERE FOR MORE RELATED TOPICS/MATERIAL


To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions


For more information contact us through any of the following means:

Mobile No phonelogo:+2348146561114 or +2347015391124 [Mr. Innocent]

Email address emailus:engr4project@gmail.com

Watsapp No whatsapp.html :+2348146561114


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp Nowhatsapp.html
:+2348146561114


E
mail Address emailus:engr4project@gmail.com


FOLLOW / VISIT US VIA:

tweeter instagram.htmlfacebook logomyyoutubelogo.html