DESIGN AND CONSTRUCTION OF AN NOISE ANALYSIS ON SMALL SCALE FOOD GRINDING MACHINES
(CASE STUDY OF ADO-EKITI)
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)" Please, sit back and study the below research material carefully. This project topic "design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF AN NOISE ANALYSIS ON SMALL SCALE FOOD GRINDING MACHINES
(CASE STUDY OF ADO-EKITI)
BY
---
EE/H2013/01430
DEPARTMENT OF MECHANICAL ENGINEERING
SCHOOL OF ENGINEERING
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on Electrical and Electronics Engineering has been approved.
By
Engr. --- Engr. ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
Engr. ---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work “design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)” visible for everyone, then the complete material on “design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)” is to be ordered for. Happy viewing!!!
Levels of noise generated from grinding machines were measured. Noise levels as high as 116dB was obtained. These levels of noise can be stressful that can result to fatigue. It is capable of causing temporary and permanent deaf. Noise spectra generated from grinding machines are mixture of low and high frequencies. Low and high frequencies noise can have negative effects on memory. The levels of noise generated from these machines are very high and are above the international standard value. Critical investigations showed that some of these machines are old enough to be replaced, lack adequate maintenance and were poorly installed, thereby gave rooms for vibrations that produce noise.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- AIM OF THE PROJECT
- OBJECTIVE OF THE STUDY
- PURPOSE OF THE STUDY
- SCOPE OF THE STUDY
- SIGNIFICANCE OF THE STUDY
- JUSTIFICATION OF THE WORK
CHAPTER TWO
LITERATURE REVIEW
- REVIEW OF THE STUDY
- OVERVIEW OF NOISE POLLUTION
- THE EFFECT OF NOISE
- OVERVIEW OF RELATED STUDIES
CHAPTER THREE
METHODOLOGY
- MATERIAL AND PROCEDURE
- RESEARCH DESIGN
- AREA OF THE STUDY
- POPULATION OF THE STUDY
- INSTRUMENT FOR DATA COLLECTION
- METHOD OF DATA COLLECTION
CHAPTER FOUR
TESTING AND RESULTS
- NOISE SPECTRA
- RESULT ANALYSIS
CHAPTER FIVE
- CONCLUSION
- REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
The ability of man to make and detect sound offers him the opportunity to communicate and receive valuable information from the environment, namely; sound alarm, music, television and others. Noise generated from industrial use of machinery, airplanes, trucks, pumps, turbines generator, steam traps and others should be differentiated from those of the community or local market places. The major sources of community noise are highway traffic, aircraft, construction work, and distribution of transformer, railway trains, and factories from which noise escape to the surrounding areas [1] and that of the local market are the grinding machines used in the markets for business purposes. On noise studies, more emphasis is placed on the negative effects, that is, the pollution aspects. Noise can keep our senses on edge and thus can prevent us from relaxing. Our mental powers control this insults to our bodies resulting into deafness over a long period of time. Also as an insidious pollutant, damage is usually long range and permanent, yet it is certainly the pollutant of least public concern and perhaps the least understood [2].
In most cases, especially in these studied sites the grinding machines were almost located or mounted in front of residential houses, markets or shops. There is no enough distance between the operators and the machines. There is direct transmissions and accumulations of noise doses to the operators.
1.1 BACKGROUND OF THE STUDY
Noise pollution is the emission of continuous undesirable noises disrespecting legal levels which, within a specific period of time, pose a threat to human health and collective well-being. Noise may be described as aperiodic acoustic signals originated from the overlap of several vibration movements with different, unrelated frequencies.
Noise has been increasing over the years, specifically in large metropolitan areas. This increase is also perceived inside public places such as market. Different noises originated from distinct sources, such as the operation of different devices and conversation among grinder cause noise pollution in the Ado-ekiti environment and this may affect the individual's physical and emotional health.According to the World Health Organization (WHO), noise may influence individuals' professional performance and quality of life, as it interferes with sleep, communication, and causes physiological and psychological reactions that are, most times, considered health problems3.
The body perceives the exposure to noise as a stressful situation, responding to it with an increase in seric levels of adrenaline and cortisol, which may interfere with the recovery of a hospitalized patient. On the other hand, an environment with adequate sound levels provides the patient with lower levels of psychological stress and physiological damage, leading to a speedier recovery4.
A study has identified that 34.0% of ado-ekiti sources of noise are completely avoidable and 28.0% are partially avoidable. The authors also state that physical solutions may reduce 48.0% of the sources of noise, and team training may reduce 14.0% of these sources5.
1.2 AIM OF THE STUDY
The main aim of this work is to analyze the effect of noise of four different machines such as pepper grinding, cassava grinding machines, flour mill grinding machines and tomato grinding machine. All these machines are seen and used in Ado-Ekiti environment and markets on daily basis.
1.3 OBJECTIVE OF THE STUDY
At the end of this work, students involved shall be able:
- To understand the meaning of noise
- To know the effect of noise on human health
- To analyze the noise level of the four machines used in this work
- To calculate noise power
1.4 PURPOSE OF THE STUDY
To assess the noise level in different machines of Ado-Ekiti market and to analyze its effects on people from reporting complaints.
1.5 SCOPE OF THE STUDY
Increasing demand for goods due to population growth, national and international competition and developing technology result in intensive machine usage. Increasing usage of machinery may cause noise pollution in our environment and may adversely affect residents, leading to physiological and psychological problems. Recently, environmental regulations have become widespread, due to increasing environmental awareness. Such laws include the regulation of workplace noise levels and measures necessary to protect mankind from the effects of excessive noise. This study examines the noise levels in a plant manufacturing corrugated board. Noise measurements were conducted at production line locations and management departments throughout the machines selected.
1.6 SIGNIFICANCE OF THE STUDY
Measuring noise levels and people’s noise exposures is the most important part of a workplace hearing conservation and noise control program. It helps identify work locations where there are noise problems, residents who may be affected, and where additional noise measurements need to be made.
1.7 JUSTIFICATION OF THE WORK
With the advent of modern technologies, noise pollution from instruments and machines and other technological advances like internal combustion engines, a bus or helicopter and aircraft in general have become a major threat to the quality of our lives. These instruments and machines are used by human beings, but various studies have shown that if the noise level is far in excess of that required for the optimum arousal level for a particular task, works become irritable as well as less efficient[3]. This irritability usually continues for sometime after the noise has stopped.
Noise pollution is a global problem that is marked by the relentless inversion every corner of the world’s environment. The degree of the noise pollution is as a result of the frequent increase in sophistication of the machinery, which replaces manual labour in our industries. The noise produced by these industries varies according to their process technology, size, and nature of products, characteristics and complexity [4]. However, the resulting noise generation by this factory machinery at alarming level into the environment must not therefore be condoled, as it is an intrusion of unwanted nuisance. Scientific evidences available on noise pollution report the consequences of noisy environment as hazardous and detrimental to human health.
CHAPTER TWO: The complete chapter two of “design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)” is available. Order full work to download. Chapter two of “AA” consists of the literature review. In this chapter all the related work on “design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)” was reviewed.
CHAPTER THREE: The complete chapter three of “design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)” is available. Order full work to download. Chapter three of “design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of “design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)” is available. Order full work to download. Chapter four of “design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)” consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a “design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)” is available. Order full work to download. Chapter five of “design and construction of an noise analysis on small scale food grinding machines (case study of ado-ekiti)” consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.
For more information contact us through Any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
Watsapp No :+2348146561114
To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.