USER'S INSTRUCTIONS: The project work you are about to view is on "production of aluminium pots". Please, sit back and study the below research material carefully. This project topic (production of aluminium pots) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "production of aluminium pots" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "production of aluminium pots" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, "production of aluminium pots" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "production of aluminium pots" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "production of aluminium pots" visible for everyone, then the complete material on "production of aluminium pots" is to be ordered for. Happy viewing!!!

---

The aim of this project is to produce aluminum pots through sand casting process.  The cast process involved drawing of element to be cast, making of pattern and core boxes, moulding of pattern, and core boxes, moulding or pattern, moulds assembling, melting of a metal pouring into the mould, solidification and cooling of metal in the mould cast knockout and separation of gate runner and riser, casting surface cleaning, removal of core. This process is use to produce metallic article (alloys) of desired shape, dimension, composition and specified properties from molten metal Poured into  a mould whose internal space (impression) reproduce the configuration and dimension of the cast article, with maximum accuracy.        

TABLE OF CONTENT
Title page                                                   
Certification                                               
Dedication                                                 
Acknowledgement                                     
Abstract
CHAPTER ONE
Introduction
CHAPTER TWO
2.0     Literature Review
2.1     Casting
2.2     Die Casting
2.3     Sand Casting
2.4     Sand
2.5     Types of sand mould
2.6     Quality of green sand
2.7     Pattern
2.8     Mould-making or production
CHAPTER THREE
3.1     Process taken  in production of Aluminium pots
3.2     Procedure for Heating the Metal Aluminium Pot
3.3     Pouring the molten metal (Aluminium) in the mould
CHAPTER FOUR       
4.0     Cleaning, Fettling and Inspection Method, Defects
4.1     Cleaning of Casting and Assessment
4.2     Fettling of Castings
CHAPTER FIVE
5.0     Conclusion and Recommendation
5.1     Conclusion
5.2     Recommendation
          Reference

 

CHAPTER ONE
1.0     INTRODUCTION       
Aluminium pots are made from Aluminium scap. The shape of the Aluminium pots yard according to the     purpose for which they are produced.
Hence there are various shapes of Aluminium pot such as cylindrical flat bottom pots spherical bowel pots e.t.c. In some cases means of production of the pots also determine their shapes.
The pots being reported on are spherical bowel pots and circular called the mouth joined together with a narrower neck. They also possess two EAR-LIKES Handle used. For lifting when loaded. The mouth is covered with a circular lead having a handle as its center.        
The cast aluminum pot serves several functions its versatility accounts   for its popularity in  many local villages, households where it serves as the primary family cooking utensil, Normally it is suspended from a tripod itself is typically constructed of 75mm diameter tree limbs about two mm  long.

          Prior to the usual of an aluminum reduction plant operation in the country. Local residents used pots made of Aluminum, which came from a distant place. It did not take long for the local entrepreneur to determine that a similar pot made of aluminum was much lighter, had much better heat transfer characteristic, and provided an improved and uniform thermal dispersion into the substance being cooked. These attributes are  important economics consideration where fuel is both scarce and expensive.
It is some what ironic that the formerly discarded and displaced cast iron pots are used as the pattern for the  sand  moulds made for casting  the aluminium. Such a cast iron pot used for pattern purposes is visible, which shows the  sand mould  being prepared.
The major aspect in preparation of aluminum cooking pot include preparation of sand, melting and pouring of the molten and finally into already prepared mould and finally the removal of the solicited casting from the sand and its dressing. After the metal had been poured the end product of the foundry operation is known as casting and may vary from a fraction of a kilogram to several tones. Various materials used in the furnace for the production of .aluminum cooking pot includes the materials that `can withstand very high temperature without causing any damage by heating. This materials as called refractory material such as crucibles used in the melting of aluminum scraps. Its should posses properties such as high mechanical strength and chemical stability at elevated temperature so as to withdraw the action of metabolic  melt oxide slag and fluxes.
The major aspect of preparation of aluminum cooking pot includes preparation of sand, melting.
Fire clay has sufficient mechanical strength and chemically stable to be used as a lining materials in furnaces for melting of aluminum scraps.
Fluxes are also added during melting of metal inform and control the composition of slag with the required physical and chemical  characteristics of the slag. Parting powder is also added to separate a content of moulding flask or boxes from one another. Surface dressing powder mould against the action of the molten metal and to help to produce good surface on casting.
Surface dressing powder used in the casting of aluminum cooking pot is talc, plumb ago and  coal dust can also be used.

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "production of aluminium pots" is also available. Order full work to download. Chapter two of "production of aluminium pots" consists of the literature review. In this chapter all the related works on "production of aluminium pots" were reviewed.

CHAPTER THREE: The complete chapter three of "production of aluminium pots" is available. Order full work to download. Chapter three of "production of aluminium pots" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "production of aluminium pots" is available. Order full work to download. Chapter four of "production of aluminium pots" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "production of aluminium pots" is available. Order full work to download. Chapter five of "production of aluminium pots" consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: