REMOTE CONTROL DEVICE INDUCTION MOTOR WITH BIDIRECTIONAL ROTATION
USER'S INSTRUCTIONS: The project work you are about to view is on "remote control device induction motor with bidirectional rotation" Please, sit back and study the below research material carefully. This project topic "remote control device induction motor with bidirectional rotation" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "remote control device induction motor with bidirectional rotation" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "remote control device induction motor with bidirectional rotation" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
REMOTE CONTROL DEVICE INDUCTION MOTOR WITH BIDIRECTIONAL ROTATION
BY
---
EE/H2013/01430
DEPARTMENT OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "remote control device induction motor with bidirectional rotation" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on Electrical and Electronics Engineering has been approved.
By
Dr. --- Dr. ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
Dr. ---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work “remote control device induction motor with bidirectional rotation” research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of “remote control device induction motor with bidirectional rotation” visible for everyone, then the complete material on “remote control device induction motor with bidirectional rotation” is to be ordered for. Happy viewing!!!
The project is designed to drive an induction motor for the required application in forward and reverse directions using wireless technology. For an example, an exhaust fan can be used in both the directions to fresh air in and throw hot air out. This can be used in case of conventional exhaust a fan that rotates in one direction only. This proposed system demonstrates a technology to rotate a squril cage induction motor in both clockwise and counter clockwise direction. It also has the provision to control the direction of the motor using a TV remote. When a TV remote button is pressed, it sends an IR signal in RC5 code which is received by a IR receiver called TSOP-1738. Output from the TSOP is fed to a decade counter which is interfaced to a relay that controls the motor. Thereafter, the relay switching is done in by-stable mode for a split-phase induction motor to rotate in forward and reverse directions.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- AIM / OBJECTIVE OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
- APPLICATIONS AND ADVANTAGES OF THE PROJECT
- LIMITATION OF THE PROJECT
CHAPTER TWO
LITERATURE REVIEW
- LITERATURE REVIEW OF REMOTE TECHNOLOGY
- HISTORICAL BACKGROUND OF REMOTE CONTROL
- DESCRIPTION OF AN AC INDUCTION MOTOR
- REVIEW OF OPERATING PRINCIPLES OF AN AC INDUCTION MOTOR
- HISTORICAL BACKGROUND OF AN AC INDUCTION MOTOR
- DIFFERENT TYPES OF AC MOTORS
- WORKING PRINCIPLE OF STAR DELTA STARTER
- WORKING CONVENTIONAL TYPE STAR DELTA STARTER
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 INTRODUCTION
3.2 BLOCK DIAGRAM
3.3 REMOTE CIRCUIT DIAGRAM AND DESCRIPTION
3.4 CONTROLLER CIRCUIT DIGRAM
3.5 PARTS LIST
3.6 SYSTEM OPERATION
3.7 CIRCUIT WORKING PRINCIPLE
CHAPTER FOUR
TEST AND RESULT ANALYSIS
- CONSTRUCTION PROCEDURE
- CASING AND PACKAGING
- ASSEMBLING OF SECTIONS
- PACKAGING
- MOUNTING PROCEDURE
- TESTING
- RESULT
- BILL OF ENGINEERING MEASUREMENTS AND EVALUATION
CHAPTER FIVE
5.0 CONCLUSION, RECOMMENDATION AND REFERENCES
- CONCLUSION
- RECOMMENDATION
- REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Bidirectional rotation of an induction motor with a remote control device is basically a device that controls the rotation of a single phase ac motor in clock wise and anti clock wise direction. In conventional way, we cannot rotate the single phase ac motor in both direction as well as we can only control this motor with a single phase one way switch. In other words, if we want to control the motor in both direction then we must use any sort of motor drive, which could be so much costly, but it would be also operate with single phase one way switch. On concentrating these issues, here we have designed a device that is called a bidirectional rotation of an induction motor with a remote control device.
This device controls the single phase ac motor in both direction forward and reverse with any type of common TV remote. This device has designed with help of single phase ac transformer, bridge rectifier, voltage regulator, IR sensors, single phase relay and CD4017 decade counter. The block diagram of this bidirectional rotation of an induction motor with a remote control device with all their essential components is shown in figure below.
1.2 AIM AND OBJECTIVE OF THE PROJECT
The project is designed to drive an induction motor for the required application in forward and reverse directions using wireless technology.
At the end of this work, the student involved shall be able to build the circuit, learn and understand the operation of the system.
1.3 SIGNIFICANCE OF THE PROJECT
1.4 APPLICATIONS AND ADVANTAGES OF THE PROJECT
- By using this bidirectional rotation of an induction motor with a remote control device the user can easily rotate the split phase induction motor in either direction.
- This bidirectional rotation of an induction motor device could be easily used with domestic and industrial exhaust fans for fresh air in and hot air throw out.
- By using bidirectional rotation of an induction motor device, the user can easily on or off the split phase inducing motor with some distance without wasting any time.
1.5 LIMITATIONS OF THE PROJECT
The following is a list of limitations for the project.
i. The receiver must reside in a location where the transmitter can site it.
ii. The circuit can be activated from up to 10 metres.
CHAPTER ONE: The complete chapter one of “remote control device induction motor with bidirectional rotation” is available. Order full work to download. Chapter one of “remote control device induction motor with bidirectional rotation”consists of the literature review. In this chapter all the related work on“remote control device induction motor with bidirectional rotation” was reviewed.
CHAPTER TWO: The complete chapter two of “remote control device induction motor with bidirectional rotation” is available. Order full work to download. Chapter two of “remote control device induction motor with bidirectional rotation” consists of the literature review. In this chapter all the related work on “remote control device induction motor with bidirectional rotation” was reviewed.
CHAPTER THREE: The complete chapter three of “remote control device induction motor with bidirectional rotation” is available. Order full work to download. Chapter three of “remote control device induction motor with bidirectional rotation” consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of “remote control device induction motor with bidirectional rotation” is available. Order full work to download. Chapter four of “remote control device induction motor with bidirectional rotation” consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of “remote control device induction motor with bidirectional rotation” is available. Order full work to download. Chapter five of “remote control device induction motor with bidirectional rotation” consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
You can also visit our facebook Page at fb.me/hyclas to view our related construction (or design) picture.
For more information contact us through Any of the following means:
Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]
Email address :engr4project@gmail.com
Watsapp No :+2348146561114
To View Our Design Pix: You can also visit our facebook Page at fb.me/hyclas for our design photos/pics.
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.