phonelogo+234 8146561114 or +2347015391124

SEQUENTIAL DEVICE CONTROL USING TV REMOTE CONTROL

USER'S INSTRUCTIONS: The project work you are about to view is on "sequential device control using tv remote control". Please, sit back and study the below research material carefully. This project topic "sequential device control using tv remote control" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "sequential device control using tv remote control" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "sequential device control using tv remote control" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

 

BY

---
--/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---



APPROVAL PAGE

This is to certify that the research work, "sequential device control using tv remote control" by ---, Reg. No. --/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work "sequential device control using tv remote control" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "sequential device control using tv remote control" visible for everyone, then the complete material on "sequential device control using tv remote control" is to be ordered for. Happy viewing!!!


ABSTRACT

This work is on sequential device control using TV remote control. This device lets the user to switch ON and switch OFF up to nine devices sequentially from your TV remote control. The circuit consists of an IR sensor module TSOP1738, which is equivalent to TSOP1238. The output of TSOP1738 is fed to the trigger input (pin 2) of IC NE555 (IC1) via LED1. IC1 is wired in monostable mode and its output is fed to clock input of IC CD4017 (IC2).
All the nine outputs of IC2 are connected to the bases of relay-driver transistors T1 through T9 via resistors R7 through R15, respectively. Relays RL1 through RL9 are connected between the positive terminal of 12V and collectors of respective transistors.

 

TABLE OF CONTENTS

 TITLE PAGE

APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
DEFINITION OF TERMS
TABLE OF CONTENT

CHAPTER ONE

    • INTRODUCTION
    • BACKGROUND OF THE PROJECT
    • PROBLEM STATEMENT
    • OBJECTIVE OF THE PROJECT
    • PURPOSE OF THE PROJECT
    • SCOPE OF THE PROJECT
    • LIMITATION OF THE PROJECT
    • PROBLEM AND ASSUMPTION OF THE PROJECT
    • APPLICATION OF THE PROJECT
    • SIGNIFICANCE OF THE PROJECT
    • BENEFIT OF THE PROJECT
    • METHODOLOGY

CHAPTER TWO

2.0      LITERATURE REVIEW
2.1      LITERATURE REVIEW OF THE STUDY
2.3     HISTORICAL BACKGROUND OF REMOTE CONTROL
CHAPTER THREE

3.0      METHODOLOGY

3.1     SYSTEM BLOCK DIAGRAM
3.2    SYSTEM CIRCUIT DIAGRAM
3.3    SYSTEM OPERATION
3.4    CIRCUIT DESCRIPTION
3.5    POWER SUPPLY UNIT             
CHAPTER FOUR
RESULT ANALYSIS
4.0   RESULT ANALYSIS
4.1   CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
4.2   ASSEMBLING OF SECTIONS
4.3   TESTING OF SYSTEM OPERATION
4.4   PACKAGING
4.5   MOUNTING PROCEDURE
4.6   TESTING
4.6.1 Pre-implementation test
4.6.2 Post-implementation testing
4.7    RESULT ANALYSIS
4.8   COST ANALYSIS
CHAPTER FIVE

    • CONCLUSIONS

5.2     REFERENCES

  •  

 

 

CHAPTER ONE
1.0                                                        INTRODUCTION
1.1                                          BACKGROUND OF THE STUDY
With the increase in consumption of energy and population, there is a grave need to conserve energy in each way possible. The inability to access and control the appliances from remote locations is one of the major reasons for energy loss. A web or an android application is used by the consumer to give instructions to these systems.
This system provides mutual interoperability among various electronic, electrical, and power appliance as well as interactive interface for people to control their operation. These features are very helpful to optimize and to economize energy consumption whereby saved energy during some few years could make more money than home automation systems implementation cost. These technologies make peoples’ life also easier, especially for elderly persons and persons with disabilities. These systems exist of course, but there are many non-interoperable, expensive, and often wired systems. Wiring complicates implementation of the home automation in buildings which are already built, especially in historical ones.
The goal of this project is to develop a secure Home control System that will allow consumer to remotely operate electric home appliances, e.g. turning on/off lights, in the user’s home sequentially.
The paper demonstrates how to develop a system that aids the control of remote devices using remote to enable devices without infrared though connected to power sources to be controlled and considering the possibility of users to monitor the status and usage of these devices.
1.2                                                  PROBLEM STATEMENT
Most homes make use of many electrical and electronics appliances such as the television set, standing fan, ceiling fan, air conditioner, lighting bulbs, video players, radio, etc. All these appliances require switching to turn on and turn off these appliances traditionally. This manual switching of any home appliance is an inconvenient method for physically disabled or elderly or even for the young and busy individuals when frequent switching operation is required. Thus, an easier method of switching is developed to replace this manual switching method, using an advanced switching method for electronic home appliances – ir remote control. This involves using remote to switch ON and OFF of home appliances.
1.3                                                   AIM OF THE PROJECT
The aim of this work is to build a sequential remote control device for home appliances that let the user to connect your regular everyday appliances to be controlled by a remote. All you have to do is connect this circuit to any of your home appliances (air conditioner, fan, ac socket etc) and you are good to go. The appliance can now be controlled by a remote control working at the designated frequency. The circuit can be activated from up to 10 metres.
1.4                                             OBJECTIVE OF THE PROJECT
The main objective of this project is to develop a device that permits the user to switch on and switch off up to nine devices sequentially from your TV remote control.
1.5                                              PURPOSE OF THIS PROJECT
The main purpose of this project is to develop a home control system with remote control. As technology is advancing so houses are also getting smarter. Modern houses are gradually shifting from conventional switches to centralized control system, involving wireless controlled switches.
Presently, conventional wall switches located in different parts of the house makes it difficult for the user to go near them to operate. Even more it becomes more difficult for the elderly or physically handicapped people to do so. Remote controlled home automation system provides a simpler solution with an infrared technology.
By operating the specified remote switch on the transmitter, the loads can be turned ON/OFF remotely through infrared technology.
1.6                                                 SCOPE OF THE PROJECT
This device allows for a user to remotely control and monitor multiple home appliances using a remote. This system will be a powerful and flexible tool that will offer this service at any time, and from anywhere with the constraints of the technologies being applied. Possible target appliances include (but are not limited to) climate control systems, security systems, and lights; anything with an electrical interface.

1.7                                            OPERATING ENVIRONMENT

The control system will include two separate units: the transmitter, and the receiver unit. There will therefore be two operating environments. When operating the system the user will make sure that there is no obstacle in between the transmitter and the receiver.

1.8                                          LIMITATIONS OF THE PROJECT

The following is a list of limitations for the project.

The receiver must reside in a location where the transmitter can site it. Only devices with electrical controlling input ports will be possible targets for control. The receiver must have a power source (220vac) attached at all times.

1.9                                         APPLICATIONS OF THE PROJECT

This project can be used in Industries; this system can be employed in houses, where people often forget to switch off electrical appliances. This system can be used to control AC’s to set the room temperature when we are outside. This work is aimed toward average consumers who wish to control household appliances remotely provided that the appliances are electrically controllable.  Example of feasible appliances and applications under consideration include; enable/disable security systems, fans, lights, kitchen appliances, and adjusting the temperatures settings of a heating/ventilation/air conditioning system.
This system can be used in industrial applications. This system can be employed in houses, where people often forget to switch off electrical appliances. This system can be used to control AC’s to set the room temperature when we are outside.
1.10                                       SIGNIFICANCE OF THE PROJECT
This device uses infrared technology to turn on / off the devices and various appliances in our home. It can prove very useful for disabled people. This project can also be used in shop, offices, industry. User has to press the remote which is connected to the project.
It helps elderly people to control switches from anywhere up to 75 feet. This four button key fob transmitter is also very productive for commercial uses in Industrial and medical systems. Remote controlled home automation system provides a simpler solution with infrared technology.
In order to achieve this, an RF remote (Keypad) is interfaced to the 555 timer on transmitter side which sends ON/OFF commands to the receiver where loads are connected. By operating the specified remote switch on the transmitter, the loads can be turned ON/OFF remotely through wireless technology.
Then user has to press various keys to control the devices. In this work:

  • Quick response is achieved.
  • Construction is easy.
  • Easy to maintain and repair.
  • Comparatively the operation cost is less.
  • Design is efficient and low cost.
  • Power consumption is low.
  • Controlling electrical devices wirelessly
  • Saves electricity (when we forget to switch off and go out).
  • We can control appliances from any place round the globe.
  • No coding is required.

1.11                                       METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

  • Study of the previous work on the project so as to improve it efficiency.
  • Draw a block diagram.
  • Test for continuity of components and devices,
  • Design of was carried out.
  • Studying of various component used in circuit.
  • Construct the circuit.
  • Finally, the whole device was cased and final test was carried out.

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "sequential device control using tv remote control" is also available. Order full work to download. Chapter two of "sequential device control using tv remote control" consists of the literature review. In this chapter all the related work on "sequential device control using tv remote control" was reviewed.

CHAPTER THREE: The complete chapter three of "sequential device control using tv remote control" is available. Order full work to download. Chapter three of "sequential device control using tv remote control" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "sequential device control using tv remote control" is available. Order full work to download. Chapter four of "sequential device control using tv remote control" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of "sequential device control using tv remote control" is available. Order full work to download. Chapter five of "sequential device control using tv remote control" consist of conclusion, recommendation and references.

 

CLICK HERE FOR MORE RELATED TOPICS/MATERIAL


To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions


For more information contact us through any of the following means:

Mobile No phonelogo:+2348146561114 or +2347015391124 [Mr. Innocent]

Email address emailus:engr4project@gmail.com

Watsapp No whatsapp.html :+2348146561114


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp Nowhatsapp.html
:+2348146561114


E
mail Address emailus:engr4project@gmail.com


FOLLOW / VISIT US VIA:

tweeter instagram.htmlfacebook logomyyoutubelogo.html