USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a solar table fan". Please, sit back and study the below research material carefully. This project topic (design and construction of a solar table fan) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a solar table fan" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a solar table fan" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of a solar table fan" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a 1kva power inverter" visible for everyone, then the complete material on "design and construction of a solar table fan" is to be ordered for. Happy viewing!!!
This work is on a table solar fan. A table fan is a small, portable type of fan that is used in various rooms of a home or office. It is more convenient compared to other types, like kitchen exhaust, window, and pedestal fans because of its portability. It serves a number of functions for home owners and office workers such as conservation of energy compared to using air conditioners, removal of heat and unwanted fumes from indoor areas, cooling a room and generation of mechanical noise that helps to distract a person's attention from undesirable background noise so he could focus on his task. The idea of a solar fan has been proven to be a very good especially for a country like Nigeria that enjoys an average of 8 hours of sunlight daily. The same sun that causes heat is made to power an object of thermal comfort at a low level of sophistication. In this design, a 3-blade table fan of 25 watt capacity capable of 6 hours of continuous operation was powered with just 1.0 Photo-voltaic (PV) module of 80 watt power rating. Also a minimum of 85% efficiency was designed for and the fan runs at a low torque of 0.95Nm. The fan blade rotates at a tip speed of 500rpm rotates on a 10mm diameter shaft. In order to maintain a constant operation during the night and when the sun is not at its peak, a 75Ah 12V battery has been considered suitable for power storage assessor.
TABLE OF CONTENT
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
- INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 PROBLEM STATEMENT
1.3 OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 LIMITATION OF THE PROJECT
1.6 APPLICATION OF THE PROJECT
1.7 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 HISTORICAL BACKGROUND OF ELECTRIC FANS
2.2 HISTORICAL REVIEW OF SOLAR ENERGY
2.3 THEORETICAL REVIEW OF SOLAR CELL
2.4 REVIEW OF SOLAR CELL EFFICIENCY
2.5 REVIEW OF SOLAR CELL MATERIALS
CHAPTER THREE
3.0 CONSTRUCTION
3.1 BLOCK DIAGRAM
3.2 DESCRIPTION OF PARTS OF THE BLOCK
3.3 DESIGN CONSIDERATIONS AND ANALYSIS
CHAPTER FOUR
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING OF SYSTEM OPERATION
4.4 TROUBLE SHOOTING METHOD
4.5 HOW TO FIX A FAN THAT HUMS
CHAPTER FIVE
5.0 CONCLUSION
5.1 RECOMMENDATION
5.2 BIBLIOGRAPHY
- INTRODUCTION
The electric fan was one of the most important electric inventions of all time. The fan is a building block of other more advanced technologies. Fans are necessary in computers, lasers, large LED lights, petrol and electric automobiles, the space station and countless other things. The fan as used in HVAC systems allows humans to build giant or underground buildings.
Solar energy currently represents the most abundant inexhaustible, non-polluting and free energy resources that could be used economically to supply man’s increasing energy demands (Nasir, 2004). Over the years, there has been a great insight into the need to tap into the proper utilization of the renewable energy. As a result, there have been great strides in trying out many electrical gadgets and equipment as to how they could be powered with renewable energy sources like the solar energy.
The share of renewable in electricity generation is around 19%, with 16% of global electricity coming from hydroelectricity and 3% from new renewable. (Renewable Energy Policy Network for the 21st Century, 2011).One of the most exciting developments in the renewable energy sector in recent years has been the decline in the cost of Photo- voltaic (PV) cells. PV module prices at the start of 2012 were nearly 50% down on a year earlier, and some 76% below their level in the summer of 2008, when the Spanish PV boom was at its height (UNEP, 2012).
As availability of fossil fuel is diminishing due to over-dependence in its use apart from its effects on ozone layer depletion, it is convinced that solar energy can contribute significantly to addressing the current challenges in energy and climate change. There is a notable growing need for countries to reduce their emissions and achieve greater energy independence while facing increasing volatility in fossil fuel prices, significant increase in energy demand and CO2 emissions in emerging countries and decreased nuclear generation in the energy mix of developed and developing countries. Many if not all day-to-day useful gadgets such as fans, water dispensers, among others should function on the solar energy. Actually, solar DC-powered fan is more convenient compared to other types, like kitchen exhaust, window, and pedestal fans because of its portability.
There are two primary types of fans, namely; centrifugal and axial (U.S. Department of Energy Efficiency and Renewable Energy, 2003). The table fan under consideration is an axial type meant to be powered with a DC source from a solar panel with a 12V battery backup. A typical fan system consists of a fan, an electric motor, a drive system, duct or piping and flow control devices (Department of Energy Efficiency and Renewable Energy, 2003). Fan design is a compromise between the various fan parameters that affect fan efficiency. The capacity is directly proportional to the fan speed; the pressure (static, total, or velocity) is proportional to the square of the fan speed; and the power required is proportional to the cube of the fan speed (BASF, 2006).There The aim of this work therefore is to design an energy efficient 25 watt single user solar table fan that will run for maximum of 6 hours, improves on the performance of previous ones and which can be sustained by the available technology in Nigeria and also meets up ASHRAE recommended thermal comfort range of 50 – 100cfm for fans. This aim is achieved by creating design ideas on the product (solar fan) through product design specifications that could enhance better lifestyles and comfort of the user, designing a solar fan that meets safety requirements of the user in his environment; and modelling the design using an Autodesk Inventor Design tool. Hence, the design of this machine was carried out at the University of Lagos, Nigeria, and should be able to deliver 85% efficiency and rotate at a tip speed of 500rpm. This machine has not been designed to run for a whole day (24 hours) but rather between 4-6 peaks working hours in the office. Also, it has not been manufactured /developed.
1.2 PROBLEM STATEMENT
The world demand for electric energy is constantly increasing, and conventional energy resources are diminishing and are even threatened to be depleted. Moreover; their prices are rising. For these reasons, the need for alternative energy sources has become indispensable, and solar energy in particular has proved to be a very promising alternative because of its availability and pollution-free nature. Due to the increasing efficiencies and decreasing cost of photovoltaic cells and the improvement of the switching technology used for power conversion, our goal is to design an electric fan powered by PV panels and that could supply stand-alone power to the load (fan). Solar panels produce direct currents (DC), and to connect these panels to power the electric fan an electric motor, a drive system, duct or piping and flow control devices (Department of Energy Efficiency and Renewable Energy, 2003). Fan design is a compromise between the various fan parameters that affect fan efficiency. The capacity is directly proportional to the fan speed; the pressure (static, total, or velocity) is proportional to the square of the fan speed; and the power required is proportional to the cube of the fan speed (BASF, 2006).There The aim of this work therefore is to design an energy efficient 25 watt single user solar table fan that will run for maximum of 6 hours, improves on the performance of previous ones and which can be sustained by the available technology in Nigeria and also meets up ASHRAE recommended thermal comfort range of 50 – 100cfm for fans. This aim is achieved by creating design ideas on the product (solar fan) through product design specifications that could enhance better lifestyles and comfort of the user, designing a solar fan that meets safety requirements of the user in his environment; and modelling the design using an Autodesk Inventor Design tool. Hence, the design of this machine was carried out at the University of Lagos, Nigeria, and should be able to deliver 85% efficiency and rotate at a tip speed of 500rpm. This machine has not been designed to run for a whole day (24 hours) but rather between 4-6 peaks working hours in the office. Also, it has not been manufactured /developed.
1.3 OBJECTIVE OF THE PROJECT
The objective of the work is to design and construct a portable solar fan which is powered by photovoltaic panels generally mounted on the lighting structure or place on a table. The photovoltaic panels charge a rechargeable battery, which powers the fan during the night or power outage.
1.4 SIGNIFICANCE OF THE PROJCET
After knowing in detail what a solar fan is and how different useful it is to make appliances work at residential and industrial levels students should also know the advantages.
- Solar energy has always helped in reducing global warming and green house effect.
- Also use of solar energy helps in saving money many people have started using solar based devices
- Solar fan helps people who use limited amount of electricity.
- A mini solar fan is more environmentally friendly.
- Though initially the installation may be costlier, in the long term it would turn out to be cheaper because it does not use power from the utility grid and may provide savings up to 30 percent on air conditioning costs.
- Risk of electric accidents are eliminated as there are no electric cords attached to the solar fan.
- A cordless appliance offers much more mobility compared to conventional fan. A mini solar fan is the best way and they are better than the normal electric ones. Also their maintenance does not cost much money
- Mini solar fan is portable, as a result of this, it can be carried from one place to another.
- 1.6 LIMITATION OF THE PROJECT
- Initially you need to shell out a lot of money for buying a solar panel, battery and fan.
- It will work effectively and produce direct current only when the Sunlight is strong.
- The solar panels that are used to attract Sunlight requires lots of space
- The device can work efficiently only if the presence of the Sun is strong.
- Solar fan can work when there is no Sunlight but provided their battery is fully charged with the help of Sunlight
1. Cool Down your Room (and yourself) Perfect for more moderate climates, electric fans are a very inexpensive way to cool almost any room in your home. They can also be quite refreshing, as they circulate cool air throughout the room.
Portable air circulators are some of the best options for this type of use, as they are easy to move from room to room. Be sure to pay attention to the size of the room you want to cool, as some kinds work better in large rooms than others. 2. Deal with smokers Whether you're dealing with a small kitchen mishap or your cigar-smoke, an electric fan can be a savior. Use your pedestal or table fan to suck up the smoky air and blow it out an open window or door. Pointed in the right direction, it can act as an exhaust.
Once the room is cleared, turn it around to blow fresh air back into the room. You don't even need smoke in the house for this trick - it works for any room that needs ventilating. 3. Sleep easier It can be especially difficult to sleep on a warm summer night. Typically, you have to choose between the noisy air conditioner or the uncomfortable heat. A bedroom fan can be a great alternative, as it operates much quieter than an air conditioning unit and it significantly lowers room temperature.
In addition, the cool breeze can be relaxing while you try to fall asleep. Pedestal fans are usually the best type for the bedroom and the variety of remote controlled options available make these a great addition to your home. A Mini Fans are perfect for moderate bedroom cooling too, and installed over the bed, they're quite effective. 4. Keep humidity in check An electric air circulator can do more than just cool. Because they ventilate the room, maintaining proper humidty levels is easy. Too much humidity can damage your home. Blowing fresh air into the room can keep the humidity levels down in your home and keep indoor areas well-ventilated. The constant circulation of air helps keep the air in your home clean as well as dry. It's a win-win all the way around. 5. Protect your bathroom Keep bathroom moisture levels in check with an exhaust fan. Installing an exhaust fan in the bathroom protects the interior and keeps it looking new. It also helps keep paint from peeling, doors from warping and mold from accumulating on bathroom surfaces too.
The added circulation keeps the air dryer, and helps remove bathroom moisture generated from a hot shower. These bathroom exhaust fans help control bathroom odors and room stuffiness too. 6. Accentuate your room A solar fan can be so much more than a functional appliance; it can also add decorative charm to your living environment. Decorative fans come in a variety of shapes and sizes and accentuate just about any room in your home. The color variety can certainly add a refreshing change of pace from the traditional models. Best of all, they work just as well as standard fans.
1.7 PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study, chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a solar table fan" is also available. Order full work to download. Chapter two of "design and construction of a 1kva power inverter" consists of the literature review. In this chapter all the related works on "design and construction of a solar table fan" were reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of a solar table fan" is available. Order full work to download. Chapter three of "design and construction of a solar table fan" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of a solar table fan" is available. Order full work to download. Chapter four of "design and construction of a solar table fan" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of "design and construction of a solar table fan" is available. Order full work to download. Chapter five of "design and construction of a solar table fan" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
