USER'S INSTRUCTIONS: The project work you are about to view is on "design and installation of single phase domestic power system". Please, sit back and study the below research material carefully. This project topic (design and installation of single phase domestic power system) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and installation of single phase domestic power system" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and installation of single phase domestic power system" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and installation of single phase domestic power system" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and installation of single phase domestic power system" visible for everyone, then the complete material on "design and installation of single phase domestic power system" is to be ordered for. Happy viewing!!!
The main objective of the project is to design and install the building electrical services for a one bedroom duplex. Due to the location, the most reliable source of electrical power is the mains national grid power. In order to achieve the main objective and to specify the size and number of back-up generators to be employed, the final circuits consisting of lighting and power sockets is designed first. The lighting design is done using the lumen method which takes into consideration the size and use of the room being lit. Power points layout design is done by considering the needs of the final user of the premises in every room; this ensures that the need for electrical power is fulfilled in the design. This is located at a convenient area and caged within the site compound. To ensure coordinated operation of the Miniature Circuit Breakers (MCB) when safeguarding against the effects of overloads and short circuits, discrimination between the devices is observed. This has enabled the system to switch off only the breaker closest to the fault without disruption of supply to other areas.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
- AIM OF THE PROJECT
- OBJECTIVE OF THE PROJECT
- SCOPE OF THE PROJECT
- SIGNIFICANCE OF THE PROJECT
CHAPTER TWO
LITERATURE REVIEW
- OVERVIEW OF ELECTRICAL DESIGN
- OVERVIEW OF ELECTRICITY
- HISTORICAL BACKGROUND OF ELECTRICITY
- DEFINING PARTS OF THE ELECTRICAL PLAN
- DETERMINING APPLICABLE DESIGN PLAN STANDARDS
- CODES AND STANDARDS
- END – USER ACCESSORIES
CHAPTER THREE
3.0 METHODOLOGY
3.1 LIGHTING DESIGN
3.2 BEDROOM DUPLEX LIGHTING DESIGN
3.3 ELECTRICAL POWER CIRCUITS
3.4 ELECTRICAL SERVICE NETWORK
3.5 POWER CIRCUIT DESIGN
3.6 PROTECTION SYSTEMS
3.7 PROTECTION SYSTEM EQUIPMENT
3.8 DISCRIMINATION AND PROTECTION SYSTEM CO-ORDINATION
3.9 LIGHTNING PROTECTION
CHAPTER FOUR
4.0 DESIGN ANALYSIS AND DISCUSSION
4.1 SAMPLE LUMEN METHOD OF LIGHTING DESIGN CALCULATION FOR THE DUPLEX
CHAPTER FIVE
- CONCLUSIONS
- RECOMMENDATION AND FUTURE WORK
- REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
For all building construction or remodeling building projects, the owner or occupant must first have a concept for the new design, and then the architect or designer can produce a set of building plans. These plans convey all the required information to the local inspection authority and associated building trades so that the construction or remodeling can take place. Because commercial and industrial buildings contain a number of electrical systems, these plans include specific electrical designs and additional documentation to verify that the design conforms to all required building codes. An electrical design goes through several important stages of development. First, the designer must understand the scope of the project. Then, the designer defines and designs each component (such as general office areas, specialized machinery, and power distribution equipment) to recognized industry standards. Finally, these individual components are compiled to form the final presentation for the design.
The main objective of the project is to do a building electrical services design for a one bedroom duplex. In order to achieve the main objective, the project work is split into other smaller but related sections and scopes with specific targets to be met. The areas of utmost interest and covered exhaustively and in detail in this project are thus:
- Lighting design
- Power points layout design
- Cables sizing
- Power back-up system
- Protection system design
- Discrimination and co-ordination system
- Power factor correction
The main aim of the project is to do a building electrical services design for a one bedroom duplex which is carried out by the student. At the end of this work, the student shall be able to:
- Identify the steps in the electrical design process.
- Determine the scope of an electrical design project.
- Interpret the various components of an electrical plan, including general and specialized loads, lighting systems, and distribution systems.
- Recognize the symbols used in electrical plan design.
- Identify the standards and regulations that guide the electrical design process.
Engineering specialization consists of various fields. One of these fields is the building design and construction which has six different categories: civil, structural, mechanical, electrical, environmental and materials engineering.
This project will focus on the electrical category of building design and construction from the electrical services design engineer’s perspective rather than that of the installation electrician or architect. The main focus is to ensure that the electrical system meets the following criteria:
- Reliability
- Durability
- Maintainability
- Efficiency
- Economy
The need to have a standard an electrical service design is not only profit to the owner or occupant of the building but also helpful to the designer of the building. For the occupant or the owner of the house, it give them safety, while for the designer it makes room for more contract.
Every electrical design has unique requirements, depending on the scope of the project. The project scope is determined by the customers’ requirements and the type of structure that the customer will occupy. For example, if the project requires new electrical systems for an existing building, then the electrical designer works to incorporate all the new electrical wiring into the existing system. The designer must evaluate the existing electrical system to ensure that existing electrical systems can accommodate new additional electrical loads that will be imposed on them. When the design is for a new pro- posed facility, then the scope of the project is much greater. Electrical designs for these types of projects require an entirely new electrical system design.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and installation of single phase domestic power system" is also available. Order full work to download. Chapter two of "design and installation of single phase domestic power system" consists of the literature review. In this chapter all the related works on "design and installation of single phase domestic power system" were reviewed.
CHAPTER THREE: The complete chapter three of "design and installation of single phase domestic power system" is available. Order full work to download. Chapter three of "design and installation of single phase domestic power system" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and installation of single phase domestic power system" is available. Order full work to download. Chapter four of "design and installation of single phase domestic power system" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of "design and installation of single phase domestic power system" is available. Order full work to download. Chapter five of "design and installation of single phase domestic power system" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
