DESIGN AND CONSTRUCTION OF A CRYSTAL AM TRANSMITTER
USER'S INSTRUCTIONS: The project work you are about to view is on "crystal am transmitter". Please, sit back and study the below research material carefully. This project topic ("crystal am transmitter".) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this"crystal am transmitter".project research material is to reduce the stress of moving from one school library to another all in the name of searching for"crystal am transmitter".research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
CRYSTAL AM TRANSMITTER
BY
---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, ''crystal am transmitter'' by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work''crystal am transmitter''research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of''crystal am transmitter''visible for everyone, then the complete material on''crystal am transmitter''is to be ordered for. Happy viewing!!!
Radio transmitter is described as an electronic device which produces radio waves with an antenna. The transmitter itself generates a radio frequency alternating current, which is applied to the antenna. When excited by this alternating current, the antenna radiates radio waves.
Amplitude modulation (AM) is a modulation technique used in electronic communication, most commonly for transmitting information via a radio carrier wave. In amplitude modulation, the amplitude (signal strength) of the carrier wave is varied in proportion to the waveform being transmitted. That waveform may, for instance, correspond to the sounds to be reproduced by a loudspeaker, or the light intensity of television pixels. This technique contrasts with frequency modulation, in which the frequency of the carrier signal is varied, and phase modulation, in which its phase is varied.AM was the earliest modulation method used to transmit voice by radio. It was developed during the first two decades of the 20th century beginning with Landell de Moura and Reginald Fessenden's radiotelephone experiments in 1900.[1] It remains in use today in many forms of communication; for example it is used in portable two-way radios, VHF aircraft radio, citizens band radio, and in computer modems (in the form of QAM). "AM" is often used to refer to mediumwave AM radio broadcasting.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.3 OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 PURPOSE OF THE PROJECT
1.6 EFFECT OF NOISE ON AM TRANSMITTER
1.7 METHODOLOGY
1.8 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF RELATED STUDIES
2.2 REVIEW OF RELATED TERMS
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 SYSTEM CIRCUIT DIAGRAM
3.2 SYSTEM OPERATION
3.3 CIRCUIT DESCRIPTION
3.4 SYSTEM CIRCUIT DIAGRAM
3.5 CIRCUIT OPERATION
3.6 IMPORTANCE AND FUNCTION OF THE MAJOR COMPONENTS USED IN THIS CIRCUIT
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING
4.4.1 PRE-IMPLEMENTATION TESTING
4.4.2 POST-IMPLEMENTATION TESTING
4.5 RESULT
4.6 COST ANALYSIS
4.7 PROBLEM ENCOUNTERED
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
CHAPTER ONE
1.1 INTRODUCTION
Radio transmitter is an electronic device which produces radio waves with an antenna. The transmitter itself generates a radio frequency alternating current, which is applied to the antenna. When excited by this alternating current, the antenna radiates radio waves.
Amplitude modulation (AM) is a modulation technique used in electronic communication, most commonly for transmitting information via a radio carrier wave. In amplitude modulation, the amplitude (signal strength) of the carrier wave is varied in proportion to the waveform being transmitted. That waveform may, for instance, correspond to the sounds to be reproduced by a loudspeaker, or the light intensity of television pixels. This technique contrasts with frequency modulation, in which the frequency of the carrier signal is varied, and phase modulation, in which its phase is varied.
AM was the earliest modulation method used to transmit voice by radio. It was developed during the first two decades of the 20th century beginning with Landell de Moura and Reginald Fessenden's radiotelephone experiments in 1900.[1] It remains in use today in many forms of communication; for example it is used in portable two-way radios, VHF aircraft radio, citizens band radio, and in computer modems (in the form of QAM). "AM" is often used to refer to medium wave AM radio broadcasting.
In AM radio broadcasting, the audio signal (music and speech) is used to modulate the amplitude of the carrier wave. In the receiver a rectifier (diode) is used to recover the audio waveform from the tuned signal and convert it to audio.
Some radio-controlled equipment uses AM as it’s method of modulation. Rather than using an audio signal to modulate the carrier, Pulse Width Modulation (PWM) or Pulse Position Modulation (PPM) is often used.
It is also very easy to modulate something like RS232 serial data onto an AM signal and AM was often used in early RF modems in telemetry and control. I have worked with both 27MHz and 35MHz AM telemetry over the years, although FM is more common today.
AM transmitters is very simple devices which is why they were invented before FM. For AM radio broadcasts on medium wave (526.5 kHz to 1606.5 kHz,) or long wave (153 to 279kHz), the simplest working receiver is a ‘crystal set’ which can be made from as few as five components (tuning coil, variable capacitor, germanium diode, small ceramic capacitor and a high impedance earphone).
1.2 OBJECTIVE OF THE PROJECT
The objective of this work is to construct a transmitter that transmits a radio signal in a frequency of 526.5 kHz to 1606.5 kHz.
1.3 SIGNIFICANCE OF THE PROJECT
- Coverage area of AM transmitter is wider than FM because atmospheric propagation
- AM is long distance propagation
- AM Circuit is cheaper and non complex than FM.
- AM have bandwidth limited
1.4 PROBLEMS OF THE PROJECT
- The only one way to withstand to noise happen is increasing power of transmitter
- Signal of AM is not stronger than FM when it propagate to obstacle.
- Only one sideband of AM transmits Information Signal, So it loss power on other sideband and Carrier.
- Noise mixes AM Signal in amplitude when it propagates in free space that it make difficulty to recover Original Signal at receiver.
1.5 APPLICATIONS OF THE PROJECT
- Radio broadcasting
- Picture transmission in a TV system
1.6 EFFECT OF NOISE ON AM TRANSMITTER
When the AM wave travels from the transmitter to receiver over a communication channel, noise gets added to it.
The noise changes the amplitude of the envelope of AM in a random manner.
As the information is contained in the amplitude variations of the AM wave, the noise will contaminate the information contents in the AM.
Hence, the performance of AM is very poor in presence of noise.
1.7 METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:
- Study of the previous work on the project so as to improve it efficiency.
- Draw a block diagram.
- Test for continuity of components and devices,
- Design and calculation for the device was carried out.
- Studying of various component used in circuit.
- Construction of the circuit was carried out.
- Finally, the whole device was cased and final test was carried out.
1.8 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to an fm transmitter. In this chapter, the background, significance, objective limitation and problem of an fm transmitter were discussed.
Chapter two is on literature review of an fm transmitter. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of''crystal am transmitter''is also available. Order full work to download. Chapter two of''crystal am transmitter''consists of the literature review. In this chapter all the related work on "crystal am transmitter" was reviewed.
CHAPTER THREE: The complete chapter three of''crystal am transmitter''is available. Order full work to download. Chapter three of''crystal am transmitter''consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of''crystal am transmitter''is available. Order full work to download. Chapter four of''crystal am transmitter''consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a''crystal am transmitter''is available. Order full work to download. Chapter five of''crystal am transmitter''consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
