USER'S INSTRUCTIONS: The project work you are about to view is on "battery charger circuit with over current and over-voltage protection". Please, sit back and study the below research material carefully. This project topic ("battery charger circuit with over current and over-voltage protection".) have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this"battery charger circuit with over current and over-voltage protection".project research material is to reduce the stress of moving from one school library to another all in the name of searching for"battery charger circuit with over current and over-voltage protection".research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

BATTERY CHARGER CIRCUIT WITH OVER CURRENT AND OVER-VOLTAGE PROTECTION

BY

---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, ''battery charger circuit with over current and over-voltage protection'' by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work''battery charger circuit with over current and over-voltage protection''research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of''battery charger circuit with over current and over-voltage protection''visible for everyone, then the complete material on''battery charger circuit with over current and over-voltage protection''is to be ordered for. Happy viewing!!!

---

Battery charger puts energy into a secondary cell or rechargeable battery by forcing an electric current through it. The purpose of cell protection is to provide the necessary monitoring and control to protect the cells from out of tolerance ambient or operating conditions and to protect the user from the consequences of battery failures. Cell protection can be external to the battery and this is one of the prime functions of the Battery Management System. This device prevents charging battery from  over-voltage and over-current so that the charger can be left unattended.

TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
TABLE OF CONTENT

CHAPTER ONE

• INTRODUCTION
• BACKGROUND OF THE PROJECT
• PROBLEM STATEMENT
• AIM/OBJECTIVE OF THE PROJECT
• PURPOSE OF THE PROJECT
• SIGNIFICANCE OF THE PROJECT
• APPLICATION OF THE PROJECT
• LIMITATION OF THE PROJECT
• ADVANTAGES OF THE PROJECT
• METHODOLOGY
• PROJECT ORGANISATION

CHAPTER TWO

LITERATURE REVIEW

2.1      REVIEW OF BATTERY CHARGER
2.2      HISTORICAL BACKGROUND OF BATTERY CHARGER
2.3      REVIEW OF RECHARGEABLE BATTERY
2.4      REVIEW OF CHARGER UNITS
2.4.1 SUPPLY UNIT
2.4.2 THE RECTIFYING UNIT
2.4.3 THE SMOOTHING UNIT
2.4.4 THE REGULATOR AND REGULATED
2.4.5 D.C CHARGING UNIT

CHAPTER THREE

3.0      CONSTRUCTION METHODOLOGY
3.1      BLOCK DIAGRAM OF THE SYSTEM
3.2      CIRCUIT DIAGRAM
3.3      CIRCUIT DESCRIPTION
3.4      SYSTEM OPERATION
3.5      DESCRIPTION OF MAJOR COMPONENTS USED

CHAPTER FOUR

RESULT ANALYSIS
4.1     CONSTRUCTION PROCEDURE AND TESTING
4.2     CASING AND PACKAGING
4.3     ASSEMBLING OF SECTIONS
4.4     TESTING OF SYSTEM OPERATIONOBSERVATIONS
4.6     DIFFICULTIES ENCOUNTERED ON THE SYSTEM
4.7      COST OF PRODUCTION

CHAPTER FIVE

• SUMAMRY
• CONCLUSIONS/SUGGESTIONS

5.3     REFERENCES

CHAPTER ONE

1.0                                                     INTRODUCTION

1.1                                     BACKGROUND OF THE PROJECT
A battery charger is an electrical device employed in charging batteries. A Battery charger comes in various designs and voltage.  The choice of a particular and type of charger depends largely on the size of battery or batteries.
The battery charge is built in such a way that it delivers a constant value of d.c current into the battery it is charging in the opposite direction from which current flows on the batteries during discharge one cannot successfully design a battery charge without a fundamental understanding of the accumulator because it also makes up the operation according to [Xie, Z.; Liu, Q.; Chang, Z.; Zhang, X. 2013].
Every charging Battery requires monitoring, that is, keeping a check on the key operational parameters during charging and discharging such as voltages and currents and the battery internal and ambient temperature. The monitoring circuits would normally provide inputs to protection devices which would generate alarms or disconnect the battery from the load or charger should any of the parameters become out of limits.
There are three main objectives common to all Battery Management Systems

• Protect the cells or the battery from damage
• Prolong the life of the battery
• Maintain the battery in a state in which it can fulfil the functional requirements of the application for which it was specified.

 To achieve these objectives the battery managing system the device will incorporate one or more protecting device.
The aim of this work is to build a charger that will automatically shut off the charging process when battery attains full charge thereby protecting the device from overcharge. This main aim of this work is protect this device from over-current and overvoltage.

1.2                                             PROBLEM STATEMENT
In the last decade, battery chargers used to be the most devices that exposes batteries to explosion and cell deterioration due to over-current or overvoltage experience because of lack of inbuilt regulating device. This automatic battery charger came to overcome this problem in that in that it has an inbuilt protecting device which protects the charger from being overcharged due to over-current or overvoltage.

1.3                                        OBJECTIVES OF THE PROJECT
The objective of the project is to design a device that will recharge 12v lead acid battery when discharged and at the same time protect the battery from overcharge.

1.4                                           PURPOSE OF THE PROJECT
The purpose of this work is to ensure the safety of charging battery, that is, to protect battery from over-current and over-voltage.

1.5                                      SIGNIFICANCE OF THE PROJECT
This device charges 12v acid battery mainly, however, if the output voltages are adjusted can be used to charge battery of lower or higher voltages. Apart from charging batteries, this device can also be used as a battery level monitor due to the battery level feature it contains. This device has protecting device which protects battery from overcharging. [Xie, Z.; Liu, Q.; Chang, Z.; Zhang, X. 2013]

1.6                                       APPLICATION OF THE PROJECT
Battery charger is used in the following devices for the purpose of recharging devices’ batteries according to (Sequeira, C.A.C, 2011), Such batteries are:

• It is used in inverter
• It is used in cellphone
• It is used in Solar energy system
• It is used in vehicles
• It is used in an uninterruptible power supply (UPS), etc.

1.7                                        LIMITATION OF THE PROJECT
The only problem with this device is that it takes longer time to recharge car battery because of the low current output, and it is design only for a 12 battery.

1.8                            ADVANTAGES OF AUTOMATIC CHARGER
Features of this automatic battery charger made it more advantageous than other types and they are as below (Sequeira, 2011):

• Automatic battery charger  has an indicator to indicate when the battery is charging and fully charged
• It has a manually operated switch that is used to ON and OFF the entire system.
• It composes of in-built active components which stop charging process when the battery is fully charged.
• It consumed less current but generate high current to the load.

1.9                                     PROJECT WORK ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study,  chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.

 

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of''battery charger circuit with over current and over-voltage protection''is also available. Order full work to download. Chapter two of''battery charger circuit with over current and over-voltage protection''consists of the literature review. In this chapter all the related work on "battery charger circuit with over current and over-voltage protection" was reviewed.

CHAPTER THREE: The complete chapter three of''battery charger circuit with over current and over-voltage protection''is available. Order full work to download. Chapter three of''battery charger circuit with over current and over-voltage protection''consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of''battery charger circuit with over current and over-voltage protection''is available. Order full work to download. Chapter four of''battery charger circuit with over current and over-voltage protection''consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a''battery charger circuit with over current and over-voltage protection''is available. Order full work to download. Chapter five of''battery charger circuit with over current and over-voltage protection''consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: