USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a 4-channel audio mixer". Please, sit back and study the below research material carefully. This project topic "design and construction of a 4-channel audio mixer" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a 4-channel audio mixer" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a 4-channel audio mixer" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

DESIGN AND CONSTRUCTION OF A 4-CHANNEL AUDIO MIXER

BY

---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, "design and construction of a 4-channel audio mixer" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "design and construction of a 4-channel audio mixer" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a 4-channel audio mixer" visible for everyone, then the complete material on "design and construction of a 4-channel audio mixer" is to be ordered for. Happy viewing!!!

---

An audio mixer is an electronic device for combining, and modifying audio signals. The modified audio signals are summed to produce some combined output signals. This project is titled design and construction of a 4-channel microphone mixer. A microphone mixer is an electronic console that is used to mix different recorded tracks by changing their volume levels, adding effects and changing the timbre of each instrument on the tracks. Audio mixers are also called mixing consoles and soundboards. Mixers are most often used by recording studios but are also typically used in live situations by live sound engineers.
There are two types of mixers, digital and analog, and both are commonly used by the same recording studio to achieve different results.In this work, an analog audio mixer using common electronics components, such as resistors, capacitors, potentiometers and operational amplifiers (Op-Amps).
The aim of this work is to design and construct a 4-channel mixer which can accept four different audio input at the same time and mix their different tracks by changing their volume levels, adding effects and changing the timbre of each instrument on the tracks.

CHAPTER ONE
1.1 INTRODUCTION
1.2 BACKGROUND OF THE STUDY PROJECT
1.3 STATEMENT OF THE PROBLEM
1.4 RESEARCH OBJECTIVE /AIM
1.5 LIMITATION SCOPE OF PROJECT

CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 A BRIEF ONLINE OF THE CHAPTER
2.2 HISTORICAL BACKGROUND OF THE PROJECT STUDY
2.3 THEORIES CONCEPT RELEVANT TO THE RESEARCH

CHAPTER THREE
3.0 RESEARCH METHODOLOGY
3.1 A BRIEF OUTLINE OF THE CHAPTER
3.2 RESEARCH DESIGN
3.3 BLOCK BY BLOCK

CHAPTER FOUR
4.0 PRINCIPLE OF OPERATION OF PROJECT
4.1 BRIEF INTRODUCTION OF THE CHAPTER
4.2 PRINCIPLE OF OPERATION OF THE PROJECT (FOR CASE STUDIES )
4.3 EXPLANATION OF THE VARIOUS UNITS BLOCK IN THE PROJECT (FOR CASE STUDIES)

CHAPTER FIVE
5.0 CONSTRUCTION OF THE DESIGNED PROJECT
5.1 A BRIEF OUTLINE OF THE CHAPTER
5.2 CHOICE OF MATERIALS
5.3 CONSTRUCTION OF THE PROJECT
5.4 BEME TABLE (FOR CASE STUDIES )
5.5 TEST RESULT OF TESTS

CHAPTER SIX
6.0 CONCLUSION SUMMARY AND/OR RECOMMENDATION
6.1 SUMMARY OF THE STUDY PROJECT CHAPTER BY CHAPTER
6.2 PROBLEM ENCOUNTERED
6.3 RECOMMENDATION
6.4 SUGGESTION FOR FURTHER STUDIES

CHAPTER ONE
1.0                                                        INTRODUCTION
1.1                               BACKGROUND OF THE STUDY PROJECT
Audio mixer is an electronic device for combining (also called "mixing"), routing, and changing the level, timbre and/or dynamics of audio signals. A mixer can mix analog or digital signals, depending on the type of mixer. The modified signals (voltages or digital samples) are summed to produce the combined output signals.
Mixing mixers are used in many applications, including recording studios, public address systems, sound reinforcement systems, broadcasting, television, and film post-production. An example of a simple application would be to enable the signals that originated from two separate microphones (each being used by vocalists singing a duet, perhaps) to be heard through one set of speakers simultaneously. When used for live performances, the signal produced by the mixer will usually be sent directly to an amplifier, unless that particular mixer is "powered" or it is being connected to powered speakers. Among the highest quality bootleg recordings of live performances are the so-called soundboard recordings that are sourced from this mixer output to the speakers.
Prior to the emergence of digital audio workstations (DAWs), the process of mixing used to be carried out on a mixing console. Currently, more and more engineers and independent artists are using a personal computer for the process. Mixing consoles still play a large part in the recording process. They are often used in conjunction with a DAW, although the DAW may only be used as a multitrack recorder and for editing or sequencing, with the actual mixing being performed on the mixer.

1.3                                          STATEMENT OF THE PROBLEM
In music industry, selection of different audio input to produce one output is always a problem in that it involves much labour. Mixers allow for precise tuning of mic inputs and speaker outputs. The result is clearer sound, and more volume from the sound system before feedback occurs.

1.4                                          RESEARCH OBJECTIVE /AIM
The objective of this work is to design an audio device which have and can accept four different audio inputs then with only one output. And the level of each audio input is controlled with potentiometer.

1.5                                          LIMITATION AND SCOPE OF PROJECT
This device was built using lm381 operational amplifier. Each of the amplifiers of lm381 is completely independent, with individual internal power supply decoupler-regulator, providing 120 dB supply rejection and 60 dB channel separation. Other outstanding features include high gain (112 dB), large output voltage swing (VCC b 2V) p-p, and wide power bandwidth (75 kHz, 20 Vp-p). High gain op amp combines up to four individually controlled input signals.

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a 4-channel audio mixer" is also available. Order full work to download. Chapter two of "design and construction of a 4-channel audio mixer" consists of the literature review. In this chapter all the related work on "design and construction of a 4-channel audio mixer" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of a 4-channel audio mixer" is available. Order full work to download. Chapter three of "design and construction of a 4-channel audio mixer" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of a 4-channel audio mixer" is available. Order full work to download. Chapter four of "design and construction of a 4-channel audio mixer" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of a 4-channel audio mixer" is available. Order full work to download. Chapter five of "design and construction of a 4-channel audio mixer" consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: