DESIGN AND CONSTRUCTION OF A BUS MONITORING AND TRACKING SYSTEM USING RFID
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a bus monitoring and tracking system using rfid". Please, sit back and study the below research material carefully. This project topic "design and construction of a bus monitoring and tracking system using rfid" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a bus monitoring and tracking system using rfid" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a bus monitoring and tracking system using rfid" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF A BUS MONITORING AND TRACKING SYSTEM USING RFID
BY
---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of a bus monitoring and tracking system using rfid" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of a bus monitoring and tracking system using rfid" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a bus monitoring and tracking system using rfid" visible for everyone, then the complete material on "design and construction of a bus monitoring and tracking system using rfid" is to be ordered for. Happy viewing!!!
TABLE OF CONTENT
COVER PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
TABLE OF CONTENT
- INTRODUCTION
1.2 RESEARCH GOALS AND OBJECTIVE
1.3 DEFINITION OF TERMS
1.4 USER ADVANTAGES
CHAPTER TWO
2.1 RFID TECHNOLOGY
2.2 RFID APPLICATION IN THE TRANSPORTATION FIELD
2.3 SYSTEM CAPABILITIES
CHAPTER THREE
METHODOLOGY
3.0 METHODOLOGY PREVIEW
3.1 EXISTING SYSTEM WORKING AND METHODOLOGY
3.2 SYSTEM DESIGN AND REQUIREMENT
CHAPTER FOUR
4.1 ENGINEERING BLOCK DIAGRAM AND DESCRIPTION
4.2 HOW DOES RFID WORKS
4.3 SYSTEM FUNCTION REQUIREMENT?
4.4 ADVANTAGE OF THIS PROJECT.
CHAPTER FIVE
5.0 CONCLUSION.
1.1 INTRODUCTION
Millions of children needs to be mould from home to school and via verra everyday. For parents, obtaining a safe transport for their children is a crucial issue. The students ride their bicycle getting to and from school safety. A research undertaken by the Scottish executive central research unit with purpose of increasing the proportional of non car travel to school reveals that travelling by bus or coach appears to be by for the safest mode. Statistics suggest that a child travelling by car is seven (7) times more likely to take part or be involved in a road traffic casualty than a child travelling by our statistics from U.S.A, CANADA and Australia also confirm that public transport (and school transport in particular) has a high level of safety just an in Europe.
For instance, the Australian college of Road safety notes that bus travel in the safest form of road transport, at least 14 times safer than the private car, and that the record for school bus travel in particular is very good.
Also, the research undertaken by national highway traffic safety administration in notes that when comparing the number of fatalities of children aged 5-18 years during normal school transportation hours, from 1989-1999 (school years). School buses are 87 times safes than private cars.
To help- avoid frightening and potential costly mistakes like these, this investigates an RFID enabled solution to here monitor children when they are traveling to and from school on stool buses. This system will transmit data via cell modem to allow buses to be tracked from a command center at fleet headquarters, as well as to the parent of that child.
As an option, a push button emergency alarm can be installed that will send an alarm to the monitoring station that the bus is in trouble. Another option that increased situational awareness or the addition of biometrics that, can store locally the identity picture sent periodically or on request from the command centre.
1.2 RESEARCH GOALS AND OBJECTIVE
The objective of this poverty to develop an affordable integrated monitoring system to ensure our fleet security. Our goals is to develop a modular system to maximize system flexibility to best meet the need of each school district. The basic system will enable law enforcement to track vehicle using RHD and a wireless data transfer mechanism that sends data to headquarters and allow to law enforcement.
A module will be developed that will provide co-operate system for identification and tracking of individual system and driver, including where and when they board and exit the bus. A module for additional on board monitoring will developed including sensor and student data as using Biometrics.
This research showed that RHD technology is a practical option for monitoring and tracking the children their trip to and from school on school buses. Lab and field trials confirmed that the RHD tags functional well under different conditions. The reading were consistent and resulted read ranges that were acceptable within the constraints of locating children stopped into the wrong bus, left the bus and left behind in the bus, the cost associated with begging of material is relatively low. It should be noted that the work completed in this research is the first phase of the project. Future work including combining RFD tracking with an information management system will result in detailed children tracking that will provide different application to the users, Once the most phases are complete, the system will be capable of notifying parents via SMS when the child water/leaves the school, enabling school authorities, fleet owners and parent to keep track of the our online, helping transporters and authorities to plan and manage the bus routes better, saving money and ensuring smooth and quick rides to the different destinations.
1.3 DEFINITION OF TERMS
- Radio-Frequency Identification (RFID)
Radio Frequency Identification (RFID) user electromagnetic fields to automatically identify and tracks tags attached to an object. The tags contains electronically stored information.
RFID tags are used in many industries, for example, an RFID tag attached to an automobile during production can be used to track active or battery assisted passive.
Tracker:- As a way to know geographical position
A RFID + Tracker: Complete Solutin
Where about of the individual items/person can be determined where person: carrying RFID (No tracker needed)
Vehicle: Fitted with tracker.
RFID combined with tracker has a diversified utility an will be evident in the subsequent slides.
1.4 User Advantages
(Benefit to parent)
1. You can complete traceability of childs movement from home to school and back.
2. You get instant information/Alerts about Arrival at pickup and drop off stops. Boarding and Alighting at school and stops entering and eating school premises.
Benefits to school management
1. You get exact information about the moving filet
2. You get information about drives functioning i.e Breakdown alerts e.t.c
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a bus monitoring and tracking system using rfid" is also available. Order full work to download. Chapter two of "design and construction of a bus monitoring and tracking system using rfid" consists of the literature review. In this chapter all the related work on "design and construction of a bus monitoring and tracking system using rfid" was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of a bus monitoring and tracking system using rfid" is available. Order full work to download. Chapter three of "design and construction of a bus monitoring and tracking system using rfid" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of a bus monitoring and tracking system using rfid" is available. Order full work to download. Chapter four of "design and construction of a bus monitoring and tracking system using rfid" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of a bus monitoring and tracking system using rfid" is available. Order full work to download. Chapter five of "design and construction of a bus monitoring and tracking system using rfid" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
