USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a hybrid ups". Please, sit back and study the below research material carefully. This project topic "design and construction of a hybrid ups" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a hybrid ups" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a hybrid ups" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

DESIGN AND CONSTRUCTION OF A HYBRID UPS

BY

---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, "design and construction of a hybrid ups" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "design and construction of a hybrid ups" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a hybrid ups" visible for everyone, then the complete material on "design and construction of a hybrid ups" is to be ordered for. Happy viewing!!!

---

TABLE OF CONTENT
COVER PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
TABLE OF CONTENT

• INTRODUCTION
• AIM
• OBJECTIVES
• SCOPE OF STUDY
• MOTIVATIONS
• LIMITATIONS

CHAPTER TWO
2.0       LITERATURE REVIEW
2.1       REVIEW OF THE STUDY 

CHAPTER THREE
3.0       METHODOLOGY
3.1       MATERIALS
3.1.1   RESISTOR
3.1.2   CAPACITOR
3.1.3   DIODE
3.1.4   ZENER DIODE
3.1.5   POTENTIOMETER
3.1.6   LIGHT EMITTING DIODE (LED)
3.1.7    MOSFET (Metal Oxide Semiconductor Field Effect Transistor)
3.1.8   RELAY
3.1.9    OPERATIONAL AMPLIFIER (OP-AMP)
3.1.10  INTEGRATED CIRCUIT (IC)
3.1.11  TRANSFORMER
3.1.12  FAN
3.1.13  HEAT SINK
3.1.14  BRIDGE RECTIFIER
3.1.15  VERO-BOARD
3.1.16  JUMPER-WIRE
3.1.17  FUSE
3.1.18  CRYSTAL OSCILLATOR
3.1.19  INSULATION TAPE
3.1.20  METALLIC CASING
3.2       METHOD
3.2.1    INVERTER
3.2.2    POWER SUPPLY UNIT STAGE
3.2.3    OSCILLATING STAGE
3.2.4    POWER MOSFET STAGE
3.2.5    TRANSFORMER STAGE
3.2.6    CHANGE OVER STAGE
3.2.7    BATTERY STAGE
3.3.1    DEEP CYCLE BATTERY (DCB)
3.3.2    PHOTOVOLTAIC CELL (PVC)
3.3.3    SOLAR CHARGE CONTROLLER

CHAPTER FOUR
4.0       TEST AND RESULT
4.1       INVERTER STAGE TESTING
4.1.1    OSCILLATOR STAGE
4.1.2    MOSFET AMPLIFIER STAGE
4.1.3    TRANSFORMATION STAGE
4.1.4    CHANGE OVER STATE
4.1.5    INVERTER OVERALL TEST
4.2       PHOTOVOLTAIC CELL (PVC) TESTING
4.2.1    PVC TEST AND RESULT
4.3       CHARGE CONTROLLER
4.4       DISCUSSION

CHAPTER FIVE
5.1       SUMMARY
5.2       CONCLUSION
5.3       RECOMMENDATION

CHAPTER ONE
1.0       INTRODUCTION
Electricity is the principal force that powers modern society. It lights buildings and streets, runs computers and telephones, drives trains and subways and operates all variety of motors and machines (“Powering a Generation”, 2014).
It is important to recognize that electricity is not mined or harvested, it must be manufactured. Since it is not easily stored in quantity, it must be manufactured at the time of demand. Electricity is a form of energy, but not an energy source. Different generating plants harness different energy sources to make electrical power. Some of these sources are thermal plants, kinetic plants, geothermal power and solar photovoltaics (“Generating Electricity”, n.d.).
Since, the demand for electricity in this area of the world is alarming, there is the need for the production or generation of constant electricity, due to the epileptic condition of electricity in the country. This gives rise to the design and construction of a 5KVA pure sine waveUninterruptible Power Supply(UPS). UPS is an acronym which stands for Uninterruptible Power Supply. Sudden interruption of power sometimes throws the nation as a whole into darkness for hours. The effect is that, the nation as a whole experiences a great harvoc that also affects social economic life of the nation.Due to all these problems caused by the sudden interruption of power supply, it became a great concern to engineers and technicians to find solution to the problem since they are the world problem solver who convert dreams to reality. Hence, the need for an Hybrid Uninterruptible Power Supply (HUPS). As the name implies, a UPS maintains continuous supply of electricity to our system when there is power failure. It also ensures that there is no damage to the electronic equipment or home appliances when there is power surge. All functions performed by UPS earn it to be defined as a device that serves as an alternative source of power when there is power failure. It is majorly used as a backup for computer systems and some household appliances. The uninterruptible power supply finds its use in hospitals, schools, offices and also in various houses (“Uses of UPS”, 2011).
The hybrid Uninterruptible Power Supply (UPS) has more than one means of charging the battery. Apart from charging the battery through mains, it is also incorporated with solar panel (photovoltaic cell) hence the name hybrid. The solar panel (PVC) is able to charge the battery with the help of charge controller which regulates voltages from the solar panel to the require voltage needed to charge a 24V dc battery.
The UPS are of two types, the rotary and static type. The rotary UPS uses an alternating current motor (AC motor), and alternating current generator (AC generator), these two are coupled together for the power needed by the AC load. The AC motor aids the continuous driving of the AC generators so as to give continuous power supply when its need arises. The static type UPS has no moving parts, it is highly efficient and provides continuous power supply at the time primary AC power fails.
UPS is classified as ON-LINE and OFF-LINE according to their voltage and frequencyfluctuations. The ON-LINE UPS is constantly ON. It is required where there is a wide range variation in voltage and frequency that are needed to be stabilized.
The OFF-LINE UPS takes its supply from the mains and is passed through a stabilizer at the same time it is charging the battery. It is also refers to as standby UPS. Off-line UPS is used as back-up in areas where fluctuation of voltage and frequency is less (“Classification of UPS”, 2012).
Sunlight, a natural form of energy generates DC current to power solar panel by both infrared and ultraviolet ray in the electromagnetic field spectral as it radiates on to the solar panel.
However, UPS deals with its use with respect to how it is being trapped to generate DC current for human use, the solar energy could be trapped into a panel already designed to attract electron being ionized from their ground orbit and then flow into the UPS that convert it into AC current by inversion. The energy generated in this form is being stored in batteries in form of charges so that it can be used at a later time (“Photovoltaic Cell”, 2016).
Solar power is the conversion of sunlight into DC current. Sunlight can be converted directly into usable energy using photovoltaic cell (PVC) or indirectly with Concentrated Solar Panels (CSP) which normally focuses the suns energy. A solar cell or photovoltaic cell (PVC) is a device that converts sunlight into DC current using the photo electric effect (“Solar Energy”, 1999).
Solar cell produces direct current (DC) power which fluctuates with the intensity of the radiated light. This usually requires conservation to certain desired voltage or alternating current (AC) which requires the use of INVERTER for inversion (“Photovoltaic Cell”, 2016).
An inverter is used to produce an uninterrupted 220V AC supply to the device connected as the output load. The inverter gives constant AC voltage at its output when the AC mains power supply is not available (“How an Inverter Works”, 2008).
Multiple solar cells are connected inside modules. These modules are then arranged together to form arrays, which are wired to an inverter which produces power of a desired voltage according to the specification of the inverter, for AC frequency/phase use (“Solar Energy”, 2017).
A UPS system ensures continuous power supply to the load. It is achieved by using solid state circuitry which employs a battery and solar energy as the alternative energy source. Typically, the basic system consists of rectifier circuit, inverter circuit and static switch and the PV. Under normal operation, power to the load is fed through the circuit. Unavailability of the public mains supply for any reason, then the load is fed from the battery/inverter, as shown in fig. 1.1 (“Uninterrupted Power Supply”, 2017).
The uninterruptible Power Supply provides clean and reliable power to vulnerable electrical equipment. The basic concept of the UPS is to discharge energy during normal operation.
The UPS system has the technology for inverting the DC source from the battery to AC sine wave to supply the load. Inverter system has advanced over the years. The earlier circuit resulted in square wave output clearly requiring a large filter and a poor dynamic performance with development in circuitry and availability of switching devices, step wave systems were developed with an increase in system dynamic performance, with development in circuitry, sine wave has been achieved, with an increased in system dynamic performance (“Uninterrupted Power Supply”,2017).

1.1       AIM
To provide uninterrupted power supply to domestic appliances and lightings where there is public mains supply failure and also generates a stable source of power supply.

1.2       OBJECTIVES
The objectives are:

• To avoid noise in the surrounding which is produced by gasoline engines such as diesel and petro generators.
• To save cost of fueling and maintenance of gasoline engine generators.
• To reduce damage of electronic appliances as a result of unstable power supply.
• To ensure that, there is continuous power supply.
• To generate 220V AC output from a 24V DC source.

1.3    SCOPES
The UPS was designed for loads not exceeding 5KVA, pure sine wave at 220V, 50Hz using PIC16F877 with a 24V/200AH battery. 

1.4       MOTIVATION
UPS systems are the best when it comes to back-up since they can come up very fast and they generate little or no noise unlike generator. Even in an area with constant power supply, power outage due to natural cause and faults are usually unannounced. It is therefore very important having a reliable back-up power installed.

1.5       LIMITATION

• It cannot support a load that consumes power that exceeds the rated voltage.
• The wave form of the output voltage is DC, there is need for the construction of an inverter.
• Getting the actual time that will come ON and OFF to be able to maximize the battery usage.

 

Fig. 1.1 Block Diagram of Hybrid UPS

1.6                                         METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

1. Study of the previous work on the project so as to improve it efficiency.
2. Draw a block diagram.
3. Test for continuity of components and devices,
4. Design and calculation for the device was carried out.
5. Studying of various component used in circuit.
6. Construction of the circuit was carried out.
7. Finally, the whole device was cased and final test was carried out.

1.7                                 PROJECT ORGANISATION

This is divided into five sections including this introduction. Section 2 is on the literature review and method of data collection are in Section 3. Results of findings are discussed in Section 4. The way forward is and conclusion in Section 5.

 

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a hybrid ups" is also available. Order full work to download. Chapter two of "design and construction of a hybrid ups" consists of the literature review. In this chapter all the related work on "design and construction of a hybrid ups" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of a hybrid ups" is available. Order full work to download. Chapter three of "design and construction of a hybrid ups" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of a hybrid ups" is available. Order full work to download. Chapter four of "design and construction of a hybrid ups" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of a hybrid ups" is available. Order full work to download. Chapter five of "design and construction of a hybrid ups" consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: