DESIGN AND CONSTRUCTION OF A WIRELESS AC LINE DETECTOR
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of a wireless ac line detector". Please, sit back and study the below research material carefully. This project topic "design and construction of a wireless ac line detector" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of a wireless ac line detector" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of a wireless ac line detector" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF A WIRELESS AC LINE DETECTOR
BY
---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of a wireless ac line detector" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of a wireless ac line detector" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of a wireless ac line detector" visible for everyone, then the complete material on "design and construction of a wireless ac line detector" is to be ordered for. Happy viewing!!!
Safety is a matter should be given priority in any circumstances whatsoever. A danger or disaster could have happened at home or place of work or anywhere else. Among the most common accident is when to nail or drill in the wall or floor. Risk of electric shock is high and it can cause injury to the public people and loss. To improve safety in the home or at work, a detection system of electrical wires that are usually hidden in the wall or floor has been developed. Have now there a few tools that can be used to detect electrical wires hidden in the wall or floor. Some of the tools can pinpoint the exact location of the wire. However, the relatively high price of these devices for use by the public.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
- INTRODUCTION
- BACKGROUND OF THE PROJECT
- PROBLEM STATEMENT
- AIM AND OBJECTIVE OF THE PROJECT
- PURPOSE OF THE PROJECT
- APPLICATION OF THE PROJECT
- SCOPE OF THE PROJECT
- METHODOLOGY
- PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
- INTRODUCTION
- REVIEW OF ELECTRIC INJURY
- REVIEW OF RELATED STUDIES
CHAPTER THREE
METHODOLOGY
- SYSTEM BLOCK DIAGRAM
- SYSTEM CIRCUIT DIAGRAM
- HARDWARE SPECIFICATIONS
- SYSTEM OPERATION
- CIRCUIT DESCRIPTION
- DESCRIPTION OF MAJOR COMPONENTS USED
CHAPTER FOUR
4.0 TEST AND RESULT ANALYSIS
- CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
- CASING AND PACKAGING
- ASSEMBLING OF SECTIONS
- TESTING OF SYSTEM OPERATION
- INSTALLATION OF THE COMPLETED DESIGN
- RESULTS AND DISCUSSION
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
Beginning a remodeling project or simply drilling into a wall to hang a picture can seem simple enough, but steps must be taken before hand to determine if electrical wires are present within nonconductive materials. With the increasing demand for safety at home and at the workplace we need a detection system that predict potential hazards exists specially this hidden live wire inside nonconductive materials when you debug home electrical wiring, a tool that determines the location of hidden wires behind nonconductive materials comes in hardly and manually. People can hurt trebly or find death during the process drilling or driving a nail at nonconductive materials without knowing the present of hidden live wire in it. The wire and the nonconductive materials can be damage during the drill or drive nail by people. The problem why its happen because people don’t know where the wire flow inside of nonconductive materials when they handle house work such as drilling, nailing and etc. The objectives of this work are analyze the data used in the presence of electric currents and electrical wire with different sizes, design a proto-type device that can detect electrical wires that hide inside nonconductive materials and its alternative current flowing presences and evaluate whether the proto-type build can detect hidden electrical wires inside of nonconductive materials and its alternative current flowing presences on it.
1.2 PROBLEM STATEMENT
Speaking about AC or alternating currents, it is far more dangerous than DC. It can easily kill if the voltage is 220v or 110v city power. Before touching any live wire always make sure no high voltage is available there.
An electric shock can cause serious injury or even death. In order to avoid injury, prior to starting work on an electrical box such as an AC mains switch-board or a power supply, for example, you must first verify there is no AC voltage.
In Industries accident takes place due to leakage of electricity. The accidents can be avoided by using the wireless AC line detector.
1.3 AIM AND OBJECTIVES OF THE PROJECT
The main aim of this project is to detect presence of electricity wirelessly. At the end of this project students involved shall be able to:
- Build this device
- Become familiar with all the electronics components involved in the circuit.
1.4 PURPUSE OF THE PROJECT
The main purpose of this work is to improve safety in the home or at work - for workers users of electricity.
1.5 APPLICATIONS OF THE PROJECT
- With this device, we can reduce the time taken to build underground fault.
- We can check the fault point of the wire in the wall to check Dead or Live wires
- It is used by electrical engineers, electronics hobbyist, and electric consumers to test the presence of electricity in a wire.
1.6 SCOPE OF THE PROJECT
This research paper analyzes a method used to detect electrical wires hidden behind materials. This analysis involves the detection of electrical live wire, the quality of detection and detection of hidden wires alternating current flowing in the wire. The hardware was designed and developed based on the effect of magnetic flux.
1.7 METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:
- Study of the previous work on the project so as to improve it efficiency.
- Draw a block diagram.
- Test for continuity of components and devices,
- Design of the device was carried out.
- Studying of various component used in circuit.
- Construction of the circuit was carried out. The construction of this project includes the placing of components on Vero boards, soldering and connection of components,
- Finally, the whole device was cased and final test was carried out.
1.8 PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study, chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.
CHAPTER FIVE
5.1 CONCLUSION
Assemble the circuit on a veroboard as compact as possible and enclose in a small box like junk mobile case. In this paper, we have proposed a paper on wireless AC line for preventing the leakage of power and theft of current. It is a very useful project for industrial power usage. In future, it could be extended even more for better efficiency.
5.2 RECOMMENDATION
This project was built for Educational purposes. If one wants to use it for industrial or home applications, I recommend that a hook should be attached to the casing that would allow fixing the system on the wall.
Working on this topic (wireless ac power detector) as my project is a good idea and it comes at the right time. I am suggesting that this particular topic should also be given to other students both in higher and lower class.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of a wireless ac line detector" is also available. Order full work to download. Chapter two of "design and construction of a wireless ac line detector" consists of the literature review. In this chapter all the related work on "design and construction of a wireless ac line detector" was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of a wireless ac line detector" is available. Order full work to download. Chapter three of "design and construction of a wireless ac line detector" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of a wireless ac line detector" is available. Order full work to download. Chapter four of "design and construction of a wireless ac line detector" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of a wireless ac line detector" is available. Order full work to download. Chapter five of "design and construction of a wireless ac line detector" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
