phonelogo+234 8146561114 or +2347015391124
DESIGN AND CONSTRUCTION OF AN INFRARED BASED PROXIMITY DETECTION SENSOR

USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of an infrared based proximity detection sensor". Please, sit back and study the below research material carefully. This project topic "design and construction of an infrared based proximity detection sensor" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of an infrared based proximity detection sensor" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of an infrared based proximity detection sensor" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

DESIGN AND CONSTRUCTION OF AN INFRARED BASED PROXIMITY DETECTION SENSOR

BY

---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018



APPROVAL PAGE

This is to certify that the research work, "design and construction of an infrared based proximity detection sensor" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work "design and construction of an infrared based proximity detection sensor" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of an infrared based proximity detection sensor" visible for everyone, then the complete material on "design and construction of an infrared based proximity detection sensor" is to be ordered for. Happy viewing!!!


ABSTRACT

Proximity sensor detects the presence of nearby objects without any physical contact using infrared sensor. The infrared sensor often emits an electromagnetic field or a beam of electromagnetic radiation (infrared, for instance), and looks for changes in the field or return signal. The object being sensed is often referred to as the proximity sensor's target.
The operating distance of the sensor depends on the actuator's shape and size and is strictly linked to the nature of the material.

TABLE OF CONTENT

TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT

CHAPTER ONE

  1. INTRODUCTION
    1. OBJECTIVE OF THE PROJECT
    2. SIGNIFICANCE OF THE PROJECT
    3. APPLICATION OF THE PROJECT
    4. PROJECT SCOPE
    5. ADVANTAGES OF THE PROJECT
    6. METHODOLOGY
    7. PROJECT ORGANISATION

CHAPTER TWO

  1. LITERATURE REVIEW
    1. REVIEW OF PROXIMITY SENSOR
    2. HISTORITICAL BACKGROUND OF PROXIMITY DETECTOR
    3. REVIEW OF DIFFERENT TYPES OF PROXIMITY SENSOR
    4. REVIEW OF IR TECHNOLOGIES FOR PROXIMITY SENSING

CHAPTER THREE

  1. CONSTRUCTION
    1. BLOCK DIAGRAM
    2. PROXIMITY SENSOR CIRCUIT SCHEMATIC
    3. COMPONENTS LIST
    4. SYSTEM OPERATION
    5. CIRCUIT  DESCRIPTION
    6. DESCRIPTION OF COMPONENTS USED

CHAPTER FOUR

  1. RESULT ANALYSIS
    1. INSTALLATION OF THE COMPLETED DESIGN
    2. CONSTRUCTION PROCEDURE AND TESTING 
    3. CASING AND PACKAGING
    4. ASSEMBLING OF SECTIONS
    5. TESTING OF SYSTEM OPERATION
    6. PROBLEM  ENCOUNTERED

CHAPTER FIVE
5.0      CONCLUSION AND RECOMMENDATION
5.1      CONCLUSION
5.2      RECOMMENDATION
5.3      REFERENCES

CHAPTER ONE
1.0                                                        INTRODUCTION
Proximity Detection Sensors detect and measure reflected infrared (IR) energy to detect the presence of an object or person.  The proximity detection devices offer a wide range of performance, with LED drive currents and IR pulse repetitions. The proximity detection circuitry compensates for ambient light, allowing it to operate in environments ranging from bright sunlight to dark rooms. The wide dynamic range allows operation in short-distance detection applications behind dark glass, such as cell phones. Proximity Detection Sensors can be used for a mechanical switch replacement or to sense human gesturing.
Proximity sensorsdetect the presence or absence of an object. Examples of proximity sensor usage include detecting an out-of-paper condition in a printer or a mobile phone screen that dims to save battery life when placed near a face.
Proximity sensors can be used in industrial, automotive and consumer applications.

    1. OBJECTIVE OF THE PROJECT

The objective of this work is to build a device which can be used to detect the presence of nearby objects without any physical contact. It does this by emitting an electromagnetic field or a beam of electromagnetic radiation (infrared) and looks for changes in the field or return signal.

    1. SIGNIFICANCE OF THE PROJECT

As a student of electrical/electronic engineering, this work has exposed me to know the application and description of many electronics components. It also made me to know that an object can be detected by electromagnetic field without making any physical contact with the object.

    1. APPLICATIONS OF THE PROJECT
  1. Parking sensors, systems mounted on car bumpers that sense distance to nearby cars for parking
  2. Ground proximity warning system for aviation safety
  3. Vibration measurements of rotating shafts in machinery
  4. Top dead centre (TDC)/camshaft sensor in reciprocating engines.
  5. Sheet breaks sensing in paper machine.
  6. Anti-aircraft warfare
  7. Roller coasters
  8. Conveyor systems
  9. Beverage and food can making lines[3]
  10. Mobile devices
  11. Touch screens that come in close proximity to the face
  12. Attenuating radio power in close proximity to the body, in order to reduce radiation exposure.

   1.4                                              SCOPE OF THE PROJECT
The project is designed to measure the proximity of any object by using an infrared. Infrared means of proximity measurement is a convenient method compared to traditional one using measurement scales.
An object moving nearby actually reflects the infrared rays emitted by the infrared LED. The infrared receiver has sensitivity angle (lobe) of 0-60 degrees, hence when the reflected IR ray is sensed, the mono in the receiver part is triggered.

1.6                                          ADVANTAGES OF THE PROJECT

  1. Good stability
  2. High Speed
  3. infrared sensors are good in terms of power
  4. Usage Low cost.

1.7                                                        METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

  1. Study of the previous work on the project so as to improve it efficiency.
  2. Draw a block diagram.
  3. Test for continuity of components and devices,
  4. Design of the device was carried out.
  5. Studying of various component used in circuit.
  6. Construction of the circuit was carried out. The construction of this project includes the placing of components on Vero boards, soldering and connection of components,
  7. Finally, the whole device was cased and final test was carried out.

1.8                                        PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to this study. In this chapter, the background, significance, scope, objective, limitation and problem, advantages of this work was discussed.
Chapter two is on literature review of the study. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.


CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of an infrared based proximity detection sensor" is also available. Order full work to download. Chapter two of "design and construction of an infrared based proximity detection sensor" consists of the literature review. In this chapter all the related work on "design and construction of an infrared based proximity detection sensor" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of an infrared based proximity detection sensor" is available. Order full work to download. Chapter three of "design and construction of an infrared based proximity detection sensor" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of an infrared based proximity detection sensor" is available. Order full work to download. Chapter four of "design and construction of an infrared based proximity detection sensor" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of an infrared based proximity detection sensor" is available. Order full work to download. Chapter five of "design and construction of an infrared based proximity detection sensor" consist of conclusion, recommendation and references.

 

CLICK HERE FOR MORE RELATED TOPICS/MATERIAL


To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions


For more information contact us through any of the following means:

Mobile No phonelogo:+2348146561114 or +2347015391124 [Mr. Innocent]

Email address emailus:engr4project@gmail.com

Watsapp No whatsapp.html :+2348146561114


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp Nowhatsapp.html
:+2348146561114


E
mail Address emailus:engr4project@gmail.com


FOLLOW / VISIT US VIA:

tweeter instagram.html pinterestusfacebook logo

Order Full Material(s)
Download Full Material(s)
Bank Accounts

Contact us

Hire a writer

Order/learn construction


View other related topics

Vrequently asked questions(FAQ)
View more related topics and download more material
Format = microsoft word

Chapters = 1-5 chapters


Price: N3,000.
»Accountancy (AC) project
» Agric engineering project topics
» Business admin and management project
» Banking and finance project
» Civil engineering project
» Co-operative economics and management project
» Computer science project
» Community Health Project
» Electrical/electronic/telecom/ power project
» Estate management project
» Education
» Human Kinetics & Health Education Project
» Industrial safety and environmental (ISET) project
» Mass communication project
» Mechanical engineering (ME) project
» Medical And Health Science Project
» Office technology and management (O.T.M) project
» Public administration (PA) project
» Public Health Education Project Topics
» Paramedic Project Topics
» Industrial Physics/Physics Electronics Project
» Science laboratory technology (microbiology option) project
» Agricultural science and engineering seminar
» Building engineering seminar topics/materials
» Civil engineering seminar topics
» Computer science seminar topics
» Environmental seminar topics
» Electrical/electronic/telecom/ power seminar
» Mechanical engineering seminar
» Physics / industrial physics/physics electronics seminar topics/materials