USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of an intelligent car parking system". Please, sit back and study the below research material carefully. This project topic "design and construction of an intelligent car parking system" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this"design and construction of an intelligent car parking system".project research material is to reduce the stress of moving from one school library to another all in the name of searching for"design and construction of an intelligent car parking system".research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

DESIGN AND CONSTRUCTION OF AN INTELLIGENT CAR PARKING SYSTEM

BY

---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, "design and construction of an intelligent car parking system" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "design and construction of an intelligent car parking system" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of an intelligent car parking system" visible for everyone, then the complete material on"design and construction of an intelligent car parking system" is to be ordered for. Happy viewing!!!

---

This System demonstrates a fully automated car parking system. For this purpose we use IR sensors along with motors, LCD display and microcontroller for controlling the system working. Our system consists of an LCD display that is used to demonstrate as a parking gate entrance display. The display displays empty slots to new car arriving at gate of parking area. If no parking space is available the system does not open the gate and displays parking full. If slot is empty system allows car to enter the lot and displays empty slots where user can park. To detect vehicle slot occupancy the system uses IR sensors. Also system uses IR sensors to detect vehicles arriving at parking gates, to open the gates automatically on vehicle arrival. The device also have barricade that shuts when you haven’t paid or scanned the bar code, barcode scanner at the entrance and exit. The microcontroller is used to facilitate the working of the entire system.

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE

1.       INTRODUCTION
2. BACKGROUND OF THE PROJECT
3. PROBLEM STATEMENT
4. AIM/OBJECTIVE OF THE PROJECT
5. PURPOSE OF THE PROJECT
6. SIGNIFICANCE OF THE PROJECT
7. APPLICATION OF THE PROJECT
8. LIMITATION OF THE PROJECT
9. BENEFIT OF THE PROJECT
10. METHODOLOGY
11. PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW

1. OVERVIEW OF THE STUDY
2. REVIEW OF RELATED STUDY
3. DEFINITION CAR PARKING SYSTEM
4. TYPES OF CAR PARKING SYSTEM
5. GENERAL FEATURES OF CAR PARKING SYSTEM
6. PROCESS OF CAR PARKING SYSTEM
7. HISTORICAL BACKGROUND CAR PARKING SYSTEMS
8. DESCRIPTION OF PARKING

CHAPTER THREE
METHODOLOGY

1. BLOCK DIAGRAM
2. SYSTEM DESCRIPTION
3. SYSTEM CIRCUIT DIAGRAM
4. SYSTEM FLOW CHART
5. SYSTEM PROGRAMME CODE
6. DESCRIPTION OF COMPONENTS USED
7. POWER SUPPLY UNIT

CHAPTER FOUR
TEST AND RESULT ANALYSIS

1. CONSTRUCTION PROCEDURE
2. CASING AND PACKAGING
3. ASSEMBLING OF SECTIONS
4. PACKAGING
5. MOUNTING PROCEDURE
6. TESTING

CHAPTER FIVE

1. CONCLUSION
2. RECOMMENDATION
3. REFERENCES

CHAPTER ONE
1.0                                                        INTRODUCTION
1.1                                         BACKGROUND OF THE PROJECT
Now days in many multiplex systems there is a severe problem for car parking space. There are many lanes for car parking, so to park a car one has to look for the all lanes. Moreover there is a lot of men labor involved for this process for which there is lot of investment. So the need is to develop a system which indicates directly which parking slot is vacant in any lane. The project involves a system including infrared transmitter and receiver in every lane and a LED and LCD display outside the car parking gate. So the person entering parking area can view the LED display and can decide which lane to enter so as to park the car.
Conventionally, car parking systems does not have any intelligent monitoring system. Parking lots are monitored by human beings. All vehicles enter into the parking and waste time for searching for parking slot. Sometimes it creates blockage. Condition become worse when there are multiple parking lanes and each lane have multiple parking slots. Use of automated system for car parking monitoring will reduce the human efforts. Display unit is installed on entrance of parking lot which will show LEDs for all Parking slot and for all parking lanes. Empty slot is indicated by the respective glowing LED.
1.2                                                  PROBLEM STATEMENT
There is always a problem of parking of cars in public places such as worship places, markets, government houses, etc. so to park a car one has to look for the all lanes which wastes time and energy to do such. In some places lot of men are hired to carry out the assignment which costs huge amount of money to pay them. So the need is to develop a system which indicates directly which parking slot is vacant in any lane, this device was invented to solve or perfume this function.
1.3                                      AIM /OBJECTIVES OF THE PROJECT
The aim of this project is to solve these problems of car parking using automatic car parking slot indicator using microcontroller. The microcontroller serves as a programming tool to run the whole operation, to  reduce  the  cost  in  terms  of  requirement  such  as  job opportunity  and to increase security. Moreover, this system is faster, flexible and can meet market needs. The system also has software which fulfils the following objectives:

1. To indicate Reserve parking space
2. To carryout Payment of ticket
3. Sends a reminder for 10 mins to expiration of ticket.
4. Generates bar code after payment

1.4                                              PURPOSE OF THE PROJECT
The purpose is to control the number of the car inside it, how to monitor the movement in/out side of the parking lot, how to check whether there is a place inside for more cars or not and the safety to park.

1.5                                                 SCOPE OF THE PROJECT
In the project “Car Parking System” we have shown the concept of an automatic car parking system. As in the modern world everything is going automatic, we have built a system which will automatically sense the entry and exit of cars through the gate and then display the number of cars in the parking lot. Even we can set a maximum capacity of cars by the help of   user interface given in the hardware in the form of switches so that there is no congestion. We have deployed a microcontroller used to sense the movement of cars and check whether there is a capacity for cars to park, then decide the gate either opens or not. It is also possible to open a gate when any car enters in the parking lot or close the door when a car exits from it.  
There are two sets of sensors: one is installed on the first gate (entry gate) and the other is installed on another gate (exit gate). When a car arrives at the door, the microcontroller receives the signal from the entry sensors and then checks whether there is a space for the car to be accommodated.  Simultaneously, it will display the number of cars present in the parking lot on a LCD screen and opens the gate if there is a space for the car to park. When a car moves out of the parking area, the microcontroller reduces the count displayed on the LCD accordingly and then closes the gate.  The sensing of entry and exit of cars is done through infrared transmitters and receivers. Before the door the infrared transmitter is mounted on one side and the receiver is placed directly against the transmitter across the door. When a car arrives, the infrared beam is blocked by the car and the receiver is devoid of infrared rays and its output changes. This change message is sent to the microcontroller and accordingly it increases the count and opens the door if there is some empty position. The procedure for the exit of cars is much similar to that of entry.

1.6                                         SIGNIFICANCE OF THE PROJECT
It will enable the drivers at the exit gate to enter if there is any empty space in the parking and disable them to enter when there is no empty space. It will manage the main parking spaces by alerting the drivers if there are spaces to park in or not. It will provide an automated system that whenever there is no space no one can access the parking and when there is space drivers can access the parking.      
In terms of money, this project has two things in   general; namely: It will reduce the number of people needed at the gate to guide drivers.
It will provide a way of getting money for any institution that has this system because it can be put on the market and people use it for their interest like in a commercial sector where an institution has movement of clients that have vehicles and the institution cannot support them at the same time; hence this automated system can be a solution.

1.7                                         APPLICATIONS OF THE PROJECT
This device is used in public places such as:

1. Garage
2. Worshipping centres
3. Industries
4. Business areas

To provide ease, and sense of safety and security of the vehicle in the crowded areas
1.8                                           LIMITATION OF THE PROJECT

1. There is a greater construction cost per space
2. Use of redundant systems will result in a greater cost.
3. It may be a bit confusing for unfamiliar users.
4. There may be a fear of breakdown. The system might malfunction if a sensor gets damaged

1.9                                               BENEFIT OF THE PROJECT
i.   There is a greater sense of security due to the fact that patrons do not actually walk to and from their own space.
ii.   It is highly feasible for extremely small sites that are unable to accommodate a conventional ramped parking structure.
iii. There is high parking efficiency

1. There is no need for driving while looking for an available space.
2. Emissions are greatly brought down and reduced.
3. The patrons wait for their car in a highly controlled environment.
4. There are less chances for vehicle vandalism.
5. There is a minimal staff requirement if it is used by known parkers.

1.9                                         METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

1. Study of the previous work on the project so as to improve it efficiency.
2. Draw a block diagram.
3. Test for continuity of components and devices,
4. programming of microcontroller
5. Design and calculation for the changeover was carried out.
6. Studying of various component used in circuit.
7. Construct a digital changeover circuit.
8. Finally, the whole device was cased and final test was carried out.

1.10                                                      PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work,   chapter two presents the literature review of the study,  chapter three describes the methods applied,  chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of an intelligent car parking system" is also available. Order full work to download. Chapter two of "design and construction of an intelligent car parking system" consists of the literature review. In this chapter all the related work on "design and construction of an intelligent car parking system" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of an intelligent car parking system" is available. Order full work to download. Chapter three of "design and construction of an intelligent car parking system" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of an intelligent car parking system" is available. Order full work to download. Chapter four of "design and construction of an intelligent car parking system" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of an intelligent car parking system" is available. Order full work to download. Chapter five of "design and construction of an intelligent car parking system" consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: