phonelogo+234 8146561114 or +2347015391124

DESIGN AND CONSTRUCTION OF DIGITAL CLOCK

USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of digital clock". Please, sit back and study the below research material carefully. This project topic "design and construction of digital clock" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design and construction of digital clock" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design and construction of digital clockquot; &research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

DESIGN AND CONSTRUCTION OF DIGITAL CLOCK

BY

---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018



APPROVAL PAGE

This is to certify that the research work, "design and construction of digital clock" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work "design and construction of digital clock" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design and construction of digital clock" visible for everyone, then the complete material on "design and construction of digital clock" is to be ordered for. Happy viewing!!!


ABSTRACT

Digital clock project is developed for the users to use a digital clock. The main parts of this project are set switch, microcontroller unit and LCD display.
This Project Digital clock using microcontroller is an advanced digital Clock, which displays the time using LCD or seven segment display. This device display time in seconds, minutes and hours. The system has an inverter which is used to power the system.
The user can set the time, date and day using the switch. When the user sets the timings, the settings will be displayed in the LCD display. When the function key is turned on, the controller sends pulse to the LCD display to display the current time.

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1      BACKGROUND OF THE PROJECT

    • PROBLEM STATEMENT
    • PURPOSE OF THE PROJECT
    • AIM/OBJECTIVE OF THE PROJECT
    • SIGNIFICANCE OF THE PROJECT
    • APPLICATION OF THE PROJECT
    • SCOPE OF THE PROJECT
    • METHODOLOGY
    • PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW

    • HISTORY OF DIGITAL CLOCK
    • REVIEW OF EXISTING TECHNOLOGY
    • THE HISTORITICAL BACKGROUND  OF THE DIGITAL CLOCK

CHAPTER THREE
METHODOLOGY

    • INTRODUCTION
    • SYSTEM BLOCK DIAGRAM
    • SYSTEM CIRCUIT DIAGRAM
    • CIRCUIT DESCRIPTION
    • PROGRAM DESCRIPTION

CHAPTER FOUR

  • .0     CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
    • CASING AND PACKAGING
    • ASSEMBLING OF SECTIONS
    • TESTING OF SYSTEM OPERATION
    • INSTALLATION OF THE COMPLETED DESIGN
    • COST ANALYSIS
    • DESCRIPTION OF SOME MAJOR COMPONENTS USED

CHAPTER FIVE

    • CONCLUSION
    • RECOMMENDATION
    • REFERENCES

CHAPTER THREE
METHODOLOGY

    • INTRODUCTION
    • SYSTEM BLOCK DIAGRAM
    • SYSTEM CIRCUIT DIAGRAM
    • CIRCUIT DESCRIPTION
    • PROGRAM DESCRIPTION

CHAPTER FOUR

  • .0     CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
    • CASING AND PACKAGING
    • ASSEMBLING OF SECTIONS
    • TESTING OF SYSTEM OPERATION
    • INSTALLATION OF THE COMPLETED DESIGN
    • COST ANALYSIS
    • DESCRIPTION OF SOME MAJOR COMPONENTS USED

CHAPTER FIVE

    • CONCLUSION
    • RECOMMENDATION
    • REFERENCES

CHAPTER ONE

  • INTRODUCTION

1.1                                         BACKGROUND OF THE PROJECT
Digital clock is very useful projects for final year students.. It has an Inbuilt Real Time Clock which tracks over the Real Time. It displays the time in hh:mms format. The time and date can be changed at any Time using the swtich. The Real Time Clock is displayed on LCD display.
A digital timing circuit (digital clock) is something we use and depend on every day. The timing circuit used in this project will be entirely hardware based. It will consist of two timing signals, a 60Hz clock pulse used as the main timing signal (multiples of 60s) and a 1kHz clock pulse used for multiplexing a 7-segment display for the clock. The 60Hz clock pulse will be divided by sixty multiple times in order to provide a pulse for seconds, minutes and hours. These pulses will be counted, stored in memory registers and then displayed to show the current time.

1.2                                   PROBLEM STATEMENT
The first clock that was invented was analogue clock which has no other features apart from time and it also consumes higher power and stops working as soon as the power battery is removed. These disadvantages also happen in our digital clocks – their time is reset or stopped as soon as the system power battery or source is removed. However, digital real time clock came to overcome these problems. Digital time clock counts hours, minutes, seconds, months, days and even years digitally.

1.3                                             OBJECTIVE OF THE PROJECT
The objective of this project is construct a device that will display the time in seconds, minutes and hours. In addition to this, it will also display time. We can also set the time using the switch.

1.4                                         SIGNIFICANCE OF THE PROJECT
You truly cannot be an organized human being unless you use a good timing system! And if you’re still someone who likes to keep all of their appointments, activities - I highly encourage you to consider tossing out the paper and find an electronic clock system that works for you.
One of the most beautiful things about digital clock is that they can be synced, so you can have your clock on your smart phone, your tablet, your laptop, as well as it can sync to your husband’s electronic clock and your kids’ clock. So no matter where you are- you can easily look up and see what your current appointments are for any given day. And the important people in your life can know the latest schedule and commitments too- without coming home and consulting the kitchen wall.
 1.5                             ADVANTAGES OF DIGITAL CLOCK

  • Even if there is power failure, this clock displays the right time using an inverter.
  •  Simplicity of the system.
  • Accuracy of the system.

    Digital clock project is developed for the users to use a digital clock. The main parts of this project are set switch, microcontroller unit and LCD display.
    This Project Digital clock using microcontroller is an advanced digital Clock, which displays the time using LCD or seven segment display. This device display time in seconds, minutes and hours. The system has an inverter which is used to power the system.
    The user can set the time, date and day using the switch. When the user sets the timings, the settings will be displayed in the LCD display. When the function key is turned on, the controller sends pulse to the LCD display to display the current time.

    TABLE OF CONTENTS
    COVER PAGE
    TITLE PAGE
    APPROVAL PAGE
    DEDICATION
    ACKNOWELDGEMENT
    ABSTRACT
    CHAPTER ONE
    INTRODUCTION
    1.1      BACKGROUND OF THE PROJECT

      • PROBLEM STATEMENT
      • PURPOSE OF THE PROJECT
      • AIM/OBJECTIVE OF THE PROJECT
      • SIGNIFICANCE OF THE PROJECT
      • APPLICATION OF THE PROJECT
      • SCOPE OF THE PROJECT
      • METHODOLOGY
      • PROJECT ORGANISATION

    CHAPTER TWO
    LITERATURE REVIEW

      • HISTORY OF DIGITAL CLOCK
      • REVIEW OF EXISTING TECHNOLOGY
      • THE HISTORITICAL BACKGROUND  OF THE DIGITAL CLOCK

    CHAPTER THREE
    METHODOLOGY

      • INTRODUCTION
      • SYSTEM BLOCK DIAGRAM
      • SYSTEM CIRCUIT DIAGRAM
      • CIRCUIT DESCRIPTION
      • PROGRAM DESCRIPTION

    CHAPTER FOUR

    • .0     CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
      • CASING AND PACKAGING
      • ASSEMBLING OF SECTIONS
      • TESTING OF SYSTEM OPERATION
      • INSTALLATION OF THE COMPLETED DESIGN
      • COST ANALYSIS
      • DESCRIPTION OF SOME MAJOR COMPONENTS USED

    CHAPTER FIVE

      • CONCLUSION
      • RECOMMENDATION
      • REFERENCES

    CHAPTER THREE
    METHODOLOGY

      • INTRODUCTION
      • SYSTEM BLOCK DIAGRAM
      • SYSTEM CIRCUIT DIAGRAM
      • CIRCUIT DESCRIPTION
      • PROGRAM DESCRIPTION

    CHAPTER FOUR

    • .0     CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
      • CASING AND PACKAGING
      • ASSEMBLING OF SECTIONS
      • TESTING OF SYSTEM OPERATION
      • INSTALLATION OF THE COMPLETED DESIGN
      • COST ANALYSIS
      • DESCRIPTION OF SOME MAJOR COMPONENTS USED

    CHAPTER FIVE

      • CONCLUSION
      • RECOMMENDATION
      • REFERENCES

     

    CHAPTER ONE

    • INTRODUCTION

    1.1                                         BACKGROUND OF THE PROJECT
    Digital clock is very useful projects for final year students.. It has an Inbuilt Real Time Clock which tracks over the Real Time. It displays the time in hh:mms format. The time and date can be changed at any Time using the swtich. The Real Time Clock is displayed on LCD display.
    A digital timing circuit (digital clock) is something we use and depend on every day. The timing circuit used in this project will be entirely hardware based. It will consist of two timing signals, a 60Hz clock pulse used as the main timing signal (multiples of 60s) and a 1kHz clock pulse used for multiplexing a 7-segment display for the clock. The 60Hz clock pulse will be divided by sixty multiple times in order to provide a pulse for seconds, minutes and hours. These pulses will be counted, stored in memory registers and then displayed to show the current time.
    1.2                                   PROBLEM STATEMENT
    The first clock that was invented was analogue clock which has no other features apart from time and it also consumes higher power and stops working as soon as the power battery is removed. These disadvantages also happen in our digital clocks – their time is reset or stopped as soon as the system power battery or source is removed. However, digital real time clock came to overcome these problems. Digital time clock counts hours, minutes, seconds, months, days and even years digitally.
    1.3                                             OBJECTIVE OF THE PROJECT
    The objective of this project is construct a device that will display the time in seconds, minutes and hours. In addition to this, it will also display time. We can also set the time using the switch.
    1.4                                         SIGNIFICANCE OF THE PROJECT
    You truly cannot be an organized human being unless you use a good timing system! And if you’re still someone who likes to keep all of their appointments, activities - I highly encourage you to consider tossing out the paper and find an electronic clock system that works for you.
    One of the most beautiful things about digital clock is that they can be synced, so you can have your clock on your smart phone, your tablet, your laptop, as well as it can sync to your husband’s electronic clock and your kids’ clock. So no matter where you are- you can easily look up and see what your current appointments are for any given day. And the important people in your life can know the latest schedule and commitments too- without coming home and consulting the kitchen wall.
    1.5                             ADVANTAGES OF DIGITAL CLOCK

    • Even if there is power failure, this clock displays the right time using an inverter.
    •  Simplicity of the system.
    • Accuracy of the system.

    1.6                                             APPLICATIONS
    Because digital clock is very small and inexpensive devices that enhance the popularity of product designs, they are often incorporated into all kinds of devices such as
    • Cars
    • Radios
    • Televisions
    1.7                                         METHODOLOGY
    To achieve the aim and objectives of this work, the following are the steps involved:

    • Study of the previous work on the project so as to improve it efficiency.
    • Draw a block diagram.
    • Test for continuity of components and devices,
    • Design and calculation for the device was carried out.
    • Studying of various component used in circuit.
    • Construction of the circuit was carried out.
    • Finally, the whole device was cased and final test was carried out.

    1.8                          PROJECT WORK ORGANISATION
    The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
    Chapter one of this work is on the introduction to a digital clock. In this chapter, the background, significance, objective limitation and problem of a digital clock were discussed.
    Chapter two is on literature review of a digital clock. In this chapter, all the literature pertaining to this work was reviewed.
    Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
    Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
    Chapter five is on conclusion, recommendation and references.


1.6                                             APPLICATIONS
Because digital clock is very small and inexpensive devices that enhance the popularity of product designs, they are often incorporated into all kinds of devices such as
• Cars
• Radios
• Televisions
1.7                                         METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

  • Study of the previous work on the project so as to improve it efficiency.
  • Draw a block diagram.
  • Test for continuity of components and devices,
  • Design and calculation for the device was carried out.
  • Studying of various component used in circuit.
  • Construction of the circuit was carried out.
  • Finally, the whole device was cased and final test was carried out.

1.8                          PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to a digital clock. In this chapter, the background, significance, objective limitation and problem of a digital clock were discussed.
Chapter two is on literature review of a digital clock. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.


CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design and construction of digital clock" is also available. Order full work to download. Chapter two of "design and construction of digital clock" consists of the literature review. In this chapter all the related work on "design and construction of digital clock" was reviewed.

CHAPTER THREE: The complete chapter three of "design and construction of digital clock" is available. Order full work to download. Chapter three of "design and construction of digital clock" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design and construction of digital clock" is available. Order full work to download. Chapter four of "design and construction of digital clock" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of digital clock" is available. Order full work to download. Chapter five of "design and construction of digital clock" consist of conclusion, recommendation and references.

 

CLICK HERE FOR MORE RELATED TOPICS/MATERIAL


To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions


For more information contact us through any of the following means:

Mobile No phonelogo:+2348146561114 or +2347015391124 [Mr. Innocent]

Email address emailus:engr4project@gmail.com

Watsapp No whatsapp.html :+2348146561114


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp Nowhatsapp.html
:+2348146561114


E
mail Address emailus:engr4project@gmail.com


FOLLOW / VISIT US VIA:

tweeter instagram.html pinterestusfacebook logo

Order Full Material(s)
Download Full Material(s)
Bank Accounts

Contact us

Hire a writer

Order/learn construction


View other related topics

Vrequently asked questions(FAQ)
View more related topics and download more material
Format = microsoft word

Chapters = 1-5 chapters


Price: N3,000.
»Accountancy (AC) project
» Agric engineering project topics
» Business admin and management project
» Banking and finance project
» Civil engineering project
» Co-operative economics and management project
» Computer science project
» Community Health Project
» Electrical/electronic/telecom/ power project
» Estate management project
» Education
» Human Kinetics & Health Education Project
» Industrial safety and environmental (ISET) project
» Mass communication project
» Mechanical engineering (ME) project
» Medical And Health Science Project
» Office technology and management (O.T.M) project
» Public administration (PA) project
» Public Health Education Project Topics
» Paramedic Project Topics
» Industrial Physics/Physics Electronics Project
» Science laboratory technology (microbiology option) project
» Agricultural science and engineering seminar
» Building engineering seminar topics/materials
» Civil engineering seminar topics
» Computer science seminar topics
» Environmental seminar topics
» Electrical/electronic/telecom/ power seminar
» Mechanical engineering seminar
» Physics / industrial physics/physics electronics seminar topics/materials