Abstract

A machine for corn Sheller is highly and greatly needed for consistence of usage of corn in local and international levels. With regards to this indispensable need, a corn-shelling machine is designed which operates to remove the corn grains and leaving the cobs intact.
In attainment to this design objective and aims, a proper considerations was given to the machinability factor which includes, installation, simplication, durability, choice material operational efficiently serviceability of the masculine low costing and prolonged life span when operates with utilization with minimal down fine  
The design details are given includes such items as materials and their characteristics. Adaptation methodology the parts relation with the whole device and the effect of the finished product upon which an inquisitive mind can make collection of fact in future which related to this project.

 

TABLE OF CONTENT
Title page                                                                                          ii
Release page                                                                                     iii
Letter of transmittal                                                                          iv
Signature page                                                                                  v
Approval page                                                                                  vi
Dedication                                                                                         vii
Acknowledgement                                                                                      viii
Abstract                                                                                            ix
List of illustration                                                                             x
List of symbol                                                                                   xi
Table of contents                                                                              xiii
CHAPTER ONE
Introduction                                                                                                1

1. Purpose of construction                                                                    2
2. Importance and specification of the project                                      3

CHAPTER TWO
Literature Review                                                                              9

1. Hand shelling method                                                              10
2. Direct linkages and its limitation                                             10
3. Refined Design and its specification                                        12

CHAPTER THREE              
Material Selection                                                                             18

1. Material selection and Design of shaft                                     21
2. Selection and location of Bearing                                            22
3. Electric Motor Selection                                                          24
4. Selection Of Pulley Material                                                    25

CHAPTER FOUR                
The Shelling Unit                                                                              26

1. The frame                                                                                27
2. The spinning shaft                                                                            28
3. Belt Drive                                                                                33

CHAPTER FIVE
Construction and Design Method                                                     38

1. Metal Hopper                                                                     38
2. The shelling Unit                                                                          39
3. Outlet                                                                        39
4. Barrel                                                                        39
5. Perforated metal                                                                           40
6. Sequence of Assembly                                                                 40

                                                                            

 

CHAPTER ONE

INTRODUCTION
We have participated indeed in mass shelling of corn using the most primitive. Cumbersome and difficult method of hand shelling, which encourages time consuming, and human stressfulness. Corn otherwise known as “Oka” in Igbo tribe is mostly used seed across all the tribe in country today. It is widely used in homes, hotels and schools for eating and seeding process (when dried). It is therefore hardly to see any Nigerian who has not tested it in one way or the other.
Now, since it is very imperative for dieting inclusively, it can be refined to form varieties of food supplementary diet such as making of Akamu (pap), semuviter corn powder, corn mill etc.
Today, in our industrial sectors such as ceramics and biscuit industry, it is widely used for making of biscuit, flouring for baking of bread, and corn Mill. Infect to summers all these, junked food that are baked in supermarket today are mostly involves corn in making them.

In the light of this as technology advances forward, on introduction of this machine (Sheller) made manifest and come into existence which is more stressless, easy to operate, low costing and time reduction with high degree of production volume and efficiency modifications have also been made it possible to be manually and electro – mechanical operated types depending on the choice of design and the speed of shaft required
Today, with the aid of this, it has created availability of corn Sheller (steeling machine) even in the market which indeed removed our difficulties and impossibilities when using and engaging with the modern method of design.

This project is meant to achieve the following purpose

The importance attached to this design is the facilitation and the production of voluminous corn Sheller without much time and without recounting much breakage of the grains of the corn in shortest possible time
The specification was obtained considering the items or component used and the hopper and barrel dimensions put into consideration as well.

The sign parameter for corn Sheller machine are.

 

 

 Below is a complete drawing of the outer barch as show.
    Fig 1 
   

1. Inner barrel – This cylindrical Barrel rotates with the shaft support by end-to-end bearings. The diameter of the shaft is ……………… mm and for the inner barrels diameter is 60…mm having 20 numbers of spikes measuring…mm from the barrel surface and also wounded varies that does the shelling process. 

Diameter of inner barrel is …mm and its length is…mm and consequently the diameter of the shaft…mm and having a length of ….mm.
Below in the diagram of the inner barrel
 

Fig 2

HOPPER

This is similar to a port the different is that it is bigger and covered like the port. It is either trapezoid or rectangular in shape, each shape chose have its advantage and disadvantage. It has an entry through which the corn caters the shelling chamber and the inner engulfing the shaft. It is obtained after cutting a mild steel and welded it with guage 12 electrode and it is dimension as.. 260 x 250 mm x 260 mm.
The diagram is as follows
 

 

 

Fig 3

 

This is the outer funnel that collect the shelled corn from the conveyor to the outside

This is the rod attached to the surface of inner barrel, which does the shelling process with the inner barrel and spring vanes. It is to 20 in number and measured …mm vertically up from the barrels surface each.

This is an exit via which cobs goes out of the barrel after shelling process.

This is a carrier that carrys the cobs out of the barrel after shelling process

These are the holes perforated below the outer barrel through which the shelled grain corn falls put to the conveyor.

This is curved mild steel welded below the perforated outer barrel inclined to enable the falling out of the shelled corn to the receptacle.

This is the particular place in the hopper through which the corn enters the shelling unit/chamber for shelling process it is measured as mm length mm width.

This is made up flat tiny metal welded round the inner barrel together with the spikes it is the part of the machine where the corn are been shelled.
It is also placed and horizontally wound the inner barrel and should be capable of withstanding impact from the corn and possesses good chemical resistance, high working temperature (100%) and tensile strength.
Dimensionally, it is measured…. mm from the surface of the inner barrel wound horisontally.

 

 

 

---

This material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We make abstract visible for everyone.

All Project Topics on this site have complete 5(five) Chapters . Each Project Material include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

To view other related topics click HERE

For more information call us on: +234 8146561114 (MTN) or+2347015391124 (AIRTEL)

To "SUMMIT" new topic(s) OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research for your new topic? if yes, click "HERE"

---

IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.