USER'S INSTRUCTIONS: The project work you are about to view is on "design of fingerprint voting machine". Please, sit back and study the below research material carefully. This project topic "design of fingerprint voting machine" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "design of fingerprint voting machine" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "design of fingerprint voting machine" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.

---

TITLE PAGE

DESIGN OF FINGERPRINT VOTING MACHINE

BY

---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018

---

APPROVAL PAGE

This is to certify that the research work, "design of fingerprint voting machine" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator

---

DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.

---

ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.

---

PROJECT DESCRIPTION: This work "design of fingerprint voting machine" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "design of fingerprint voting machine" visible for everyone, then the complete material on "design of fingerprint voting machine" is to be ordered for. Happy viewing!!!

---

The heart of democracy is voting. The heart of voting is trust that each vote is recorded and tallied with accuracy and impartiality. The accuracy and impartiality are tallied in high rate with biometric system. Among these biometric signs, fingerprint has been researched the longest period of time, and shows the most promising future in real-world applications. Because of their uniqueness and consistency over time, fingerprints have been used for identification over time. However, because of the complex distortions among the different impression of the same finger in real life, fingerprint recognition is still a challenging problem.
Fingerprint Electronic Voting Machine (EVM) is a simple electronic device used to record votes in place of ballot papers and boxes which were used earlier in conventional voting system. Fundamental right to vote or simply voting in elections forms the basis of democracy. All earlier elections be it state elections or centre elections a voter used to cast his/her favorite candidate by putting the stamp against his/her name and then folding the ballot paper as per a prescribed method before putting it in the Ballot Box. This is a long, time-consuming process and very much prone to errors. This situation continued till election scene was completely changed by electronic voting machine. No more ballot paper, ballot boxes, stamping, etc. all this condensed into a simple box called ballot unit of the electronic voting machine. Because biometric identifiers cannot be easily misplaced, forged, or shared, they are considered more reliable for person recognition than traditional token or knowledge based methods. So the Electronic voting system has to be improved based on the current technologies viz., biometric system.

TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1      BACKGROUND OF THE PROJECT

1. PROBLEMSTATEMENT
2. ADVANTAGES OF THE PROJECT
3. AIM/OBJECTIVE OF THE PROJECT
4. SIGNIFICANCE OF THE PROJECT
5. LIMITATION OF THE PROJECT
6. METHODOLOGY
7. PROJECT ORGANISATION

 

CHAPTER TWO
LITERATURE REVIEW

1. REVIEW OF FINGERPRINT VOTING MACHINE
2. REVIEW OF FINGERPRINT IDENTIFICATION
3. DESCRIPTION OF A VOTING MACHINE
4. EARLY HISTORICAL BACKGROUND OF A VOTING MACHINE
5. VOTE-RECORDING TECHNOLOGIES

CHAPTER THREE
METHODOLOGY

1. BLOCK DIAGRAM OF THE PROJECT
2. SYSTEM CIRCUIT DIAGRAM
3. CIRCUIT DESCRIPTION
4. HARDWARE REQUIREMENT
5. SOFTWARE REQUIREMENT
6. SYSTEM WORKING PRINCIPLE
7. CIRCUIT OPERATION
8. DESCRIPTION AND FUNCTION OF MAJOR PARTS OF THE SYSTEM
9. POWER SUPPLY UNIT       

CHAPTER FOUR
RESULT ANALYSIS

1. ECONOMIC OF THE PROJECT
2. PROJECT VIABILITY
3. RELIABILITY
4. MAINTAINABILITY
5. PROJECT EVALUATION
6. PROBLEMS FACED AND MODIFICATIONS
7. FUTURE MODIFICATIONS

CHAPTER FIVE

1. CONCLUSION
2. REFERENCES 

CHAPTER ONE
   1.0           INTRODUCTION

		1.1                                    BACKGROUND OF THE PROJECT Voting machines are the total combination of mechanical, electromechanical, or electronic equipment (including software, firmware, and documentation required to program control, and support equipment), that is used to define ballots; to cast and count votes; to report or display election results; and to maintain and produce any audit trail information. The first voting machines were mechanical but it is increasingly more common to use electronic voting machines. A voting system includes the practices and associated documentation used to identify system components and versions of such components; to test the system during its development and maintenance; to maintain records of system errors or defects; to determine specific changes made after initial certification; and to make available any materials to the voter (such as notices, instructions, forms, or paper ballots). Traditionally, a voting machine has been defined by the mechanism the system uses to cast votes and further categorized by the location where the system tabulates the votes. Voting machines have different levels of usability, security, efficiency and accuracy. Certain systems may be more or less accessible to all voters, or not accessible to those voters with certain types of disabilities. They can also have an effect on the public's ability to oversee elections. Electronic voting systems may offer advantages compared to other voting techniques. An electronic voting system can be involved in any one of a number of steps in the setup, distributing, voting, collecting, and counting of ballots, and thus may or may not introduce advantages into any of these steps. Moreover it is also important that a false entry should not be made so for this one of the most secure methods for voting is using a biometric sensor like a fingerprint reader. Fingerprints are one of many forms of biometrics used to identify individuals and verify their identity. Fingerprint recognition or fingerprint authentication refers to the automated method of verifying a match between two human fingerprints. In this project we will be using a Fingerprint reader for providing access to the voter as well as making a  log if the person has voted or not.  1.2                                        STATEMENT OF THE PROBLEM Voting has been parts and parcel of student bodies in various educational institutions Nigeria. University college has various student associations that embark on election each year for the selection of new leaders that will oversee the smooth running of such associations. Over the years, student and candidates of such elections have been complaining of slowness, unreliability and non-free and fair elections. It would be better if student union government acquires software that provides authentic procedures for voting and maintains election records for future references. The system is to be developed with high security and user friendly. 1.3                                                  ADVANTAGES OF THE PROJECT Sophisticated security No manual errors No false intrusion No Need to remember any password or ID

1.4                                             OBJECTIVE OF THE PROJECT
The objective of voting is to allow voters to exercise their right to express their choices regarding specific issues, pieces of legislation, citizen initiatives, constitutional amendments, recalls and/or to choose their government and political representatives. This system improves the security performance in the voting machine as well as provide easy access to cast the vote by using finger print.
Technology is being used more and more as a tool to assist voters to cast their votes. To allow the exercise of this right, almost all voting systems around the world include the following steps:
·         Voter identification and authentication
·         Voting and recording of votes cast
·         vote counting
·         Publication of election results

1.5                                         SIGNIFICANCE OF THE PROJECT
This project is very used to improve the security performance in the voting machine. In this project finger print is used as vote ID card. Now day's some person makes the duplicate vote ID card. But in this project human finger print is used for caste the vote. So this project improves the security performance and avoid forgery vote because naturally one human finger print is different from other human.

1.6                                           LIMITATION OF THE PROJECT
Limitation of this particular project talks about the disadvantages of using the device. This device has no different than websites or software; they can be penetrated and altered by a hacker.
• Overall cost is high, physical tampering could be possible.
• Computer software and systems can have problems that may delay or even halt voting.

1.7                                         METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:

1. Study of the previous work on the project so as to improve it efficiency.
2. Draw a block diagram.
3. Test for continuity of components and devices,
4. Design and calculation for the device was carried out.
5. Studying of various component used in circuit.
6. Construction of the circuit was carried out.
7. Finally, the whole device was cased and final test was carried out.

1.8                                                         PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work, chapter two presents the literature review of the study,  chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.

---

CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "design of fingerprint voting machine" is also available. Order full work to download. Chapter two of "design of fingerprint voting machine" consists of the literature review. In this chapter all the related work on "design of fingerprint voting machine" was reviewed.

CHAPTER THREE: The complete chapter three of "design of fingerprint voting machine" is available. Order full work to download. Chapter three of "design of fingerprint voting machine" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "design of fingerprint voting machine" is available. Order full work to download. Chapter four of "design of fingerprint voting machine" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a "design of fingerprint voting machine" is available. Order full work to download. Chapter five of "design of fingerprint voting machine" consist of conclusion, recommendation and references.

 

---

To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions

---

For more information contact us through any of the following means:

Mobile No :+2348146561114 or +2347015391124 [Mr. Innocent]

Email address :engr4project@gmail.com

Watsapp No :+2348146561114

---

COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp No :+2348146561114

Email Address :engr4project@gmail.com

---

FOLLOW / VISIT US VIA: