FABRICATION OF YAM POUNDING MACHINE
USER'S INSTRUCTIONS: The project work you are about to view is on "fabrication of yam pounding machine". Please, sit back and study the below research material carefully. This project topic "fabrication of yam pounding machine" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "fabrication of yam pounding machine" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "fabrication of yam pounding machine" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.
TITLE PAGE
FABRICATION OF YAM POUNDING MACHINE
BY
---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---
DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "fabrication of yam pounding machine" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.
By
--- . ---
Supervisor Head of Department.
Signature………………. Signature……………….
……………………………….
---
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "fabrication of yam pounding machine" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "fabrication of yam pounding machine" visible for everyone, then the complete material on "fabrication of yam pounding machine" is to be ordered for. Happy viewing!!!
The aim of this research work is based on the design and development of a motorized yam pounder for pounding yam. This research was considered because of the importance of pounded yam in Africa particularly in Nigerian and because of the time and energy wasted using the traditional mortal and pestle method of yam pounding. The research work aimed at eliminating the labour involved in traditional method of pounding. Through this improvement, the possibility of food contaminating by sweating while pounding will be control. This project work sought to design a yam pounder that pounds yam right from the peeled cooked stage in a pounding bowl with the help of an electric motor that transmit power through rotary motion together with the help of shaft. The pounding blades function at the pestle. The machine is to be operated by electricity and it consists of shaft, electric motor, yam beaters or pounding blades, bowl and the frame. Metal Rod for shaft; 0.30mm, Angle Bar for Frame; 40O, Stainless Steel Sheet; 0.2mm, Flat Mild (Pan); 2mm (Thickness), Prime mover; 1horse power, Bolts and Nuts; M8, Belt; V-belt, V-35, Screws; Cap Screw. Low cost materials were used so as to make the machine affordable for average. Nigerian homes, thereby improving the standard of living. In order to avoid food contamination stainless material were also incorporated for smooth and clean pounding before consumption.
TABLE OF CONTENTS
Title page i
Declaration ii
Dedication iii
Certification iv
Acknowledgements v
Abstract vi
Table of Contents vii
CHAPTER ONE
1.0 INTRODUCTION 1
1.1 Historical Background 2
1.1.1Major Cultivated Species 5
1.1.2 National Value 6
1.2 Problem Statement 7
1.3 Justification of Project 8
1.4 Aims and Objectives 9
CHAPTER TWO
2.0 LITERATURE REVIEW 10
2.1.1 Agronomic Characteristics of Yam 13
2.1.2 Nutritional Composition of Yam 14
2.1.3 Utilization and Processing of Yam 16
2.1.4 Yam Selection and Weighing 18
2.2 Types of Yam Pounding 19
2.2.1 Manual Pounding 20
2.2.2 Stirring and Blending Type Pounder 20
CHAPTER THREE
3.0 DESIGN ANALYSIS, CALCULATION, MATERIAL
SELECTION AND COST ANALYSIS 22
3.1 Design Analysis 23
3.1.1 Component/Part Design 23
3.1.2 Power Transmission 24
3.1.3 The Pulley 24
3.1.4 Belt Length and Tension 26
3.2 Design Calculation 28
3.2.1 Volume of Bowl 29
3.2.2 Mass of (Blade) Beater 30
3.2.3 Tangential Force on the Beater 31
3.2.4 Resisting Force on the Beater 33
3.2.5 Determination of the Crushing Force and
Power Requirement 34
3.2.6 Shaft Design 36
3.3 Material Selection 38
3.3.1 Bearing Design and Selection 39
3.3.2 Belt Selection 42
3.4 Cost Analysis 43
CHAPTER FOUR
4.0 FABRICATION AND TESTING 44
4.1 Manufacturing Processes 44
4.1.1 Tools used during the Construction 45
4.1.2 Operation carried out 47
4.1.3 The Frame 50
4.1.4 The Shaft 51
4.1.5 The Sitting 52
4.1.6 Assembly 52
4.1.7 Mode of Operation 54
4.2 Testing and Evaluation of Efficiency 55
4.2.1 Result and Discussion 55
4.2.2 Pounding Efficiency 57
CHAPTER FIVE
5.0 CONCLUSION AND RECOMMENDATIONS 58
5.1 Conclusion 58
5.2 Recommendations 59
References 60
Appendices 63
CHAPTER ONE
1.0 INTRODUCTION
Yam is another crop cultivated across Nigeria. It is a seasonal crop and very difficult to preserve as it tends to rot. Nearly all Nigerians consume yam on regular basis and in large quantities particularly the Yoruba tribe in Nigeria. Nature allows yam to form a bond when it pounded or beaten in a mortar, it is then consumed as a meal with a choice soup. Pounded yam is a staple food consumed by the indigenous process of pounding yam is very laborious. It requires physical pounding by one or more people.
Depending on the quantity in the mortar, in a bid to reduce the labour involved in yam pounding came the manufacturing of Herbert mixer, the Kenwood mixer and Hammer mill in early 1975. These intended yam pounders failed due to some limitations in their operational functions. The Herbert and Kenwood mixers had almost the same operational principle and they had been identified for poor pounding due to the flapping (moving up and down) of their stirrer or mixer which is keyed to the electric rotating shaft. In addition to the poor pounding of both pounders, the Herbert mixer was found to heat excessively and as a result, the machine has to be stopped intermittently for cooling purpose.
1.1 HISTORICAL BACKGROUND
Yam belongs to the class of carbohydrate type of food and had been one of the oldest recipes known to man. It has been a major food crop in many of the African/Caribbean’s countries such as Ghana, Ethiopia, Benin Republic and Nigeria in particular. Also, in some other parts of the world like Brazil, India, Oceania and Latin American, yam is a major source of food.
The word “yam” was derived from the wolof word “nyam” which is a Portuguese name meaning “to taste”. Also, in other African language, it can mean “to eat” e.g. in Hausa “nyam”. This perennial herbaceous crop is of different species such as white yam (dioscorea-rotundata) yellow yam (dioscorea-Acayenensis), water yam (dioscorea alata) and trifoliate yam (dioscorea-dumentorum). The fruit of yam consists of a membranaceous, three-wing capsule. The yam family is mostly of the weak-stemmed vines with large, under ground food storage organs-tuber-rhizomes.
Yam has found its use in the preparation of steroid hormones by syntax synthesis of cortisone from yam extract. Also, its lower glycemic index than potatoes product accounts for its more sustainable energy and better protection against obesity and diabetes.
According to the food information network in 2008, it was estimated that the world production of yam in 1993 was at 28.1million tons in which 96% of this estimate was from the West Africa tropical regions and 71% from Nigeria. This figure was later reviewed in 1998 accounting for about 72.4% of the world total production of 29.6million tones. Also, according to the Federal Office of Statistics, Nigeria is the world largest producer of yams having the water yam (dioscorea alata) and the yellow yam (dioscorea rotumdata) as her most cultivated species of yam.
Yam, been one of the most sumptuous meals can be prepared in diverse ways. While the Yoruba tribe may prefer its dried, milled and then made into a slightly solid paste called “Amala”, the Igbos would prefer cutting the tuber into smaller blocks or bits, boiled and eaten in order to avoid the tedious nature of pounding the boiled yam which results to bond formation like the Nigeria locally prepared fufu. However, the process of meshing or beating something into pulp or powder with repeated heavy blows is known as pounding.
Yam has remained one of the most highly regarded food products in West Africa and particularly Nigeria as virtually all her ethnic groups feed on it; hence its close integration into socio-cultural, economy and religious aspect of life such as marriage where some tubers of yam are presented to the bride family in accordance to the customs of the people. Also, there is the new yam festival which marks the harvest and eating of the newly harvested yams and are also used as sacrificial and appreciation items.
However, the background of this study originated from the desire of a Nigerian family of four who spent majority of his career life in the United Kingdom (Bristol, England) in the medical field who came back home and needed to adopt to his home culture which he found pounded yam very sumptuous meal but the rigorous processes involved in the traditional method which he also observed to be unhygienic and the noisy effect of the process due to the number of strokes during pounding to be uncalled for.
1.1.1 MAJOR CULTIVATED SPECIES
Yam, a tropical crop in the genus Dioscorea, has as many as 600 species out of which six are economically important staple species. These are:
Dioscorea rotundata (white guinea yam), Dioscorea alata (yellow yam), Dioscorea bulbifera (aerial yam). Dioscorea esculent (Chinese yam) and Dioscorea dum etroum (trifoliarte yam). Out of these, Dioscorea rotundata (white yam) and Dioscorea alata (water yam) are the most common species in Nigeria. Yams are grown in the coastal region in rain forests, wood savanna and southern savanna habitats.
Yam is in the class of roots and tubers that is a staple of the Nigerian and West African diet, which provides some 200 calories of energy per capita daily. In Nigeria, in many yam producing areas, it is said that “yam is food and food is yam”. However, the production of yam in Nigeria is substantially short and cannot meet the growing demand at its present level of use. It also has an important social status in gatherings and religious functions, which is assessed by the size of yam holdings one possesses.
1.1.2 NATIONAL VALUE
Yams are primary agricultural commodities and major staple crops in Africa, where yam cultivation began 11,000 years ago. In West Africa they are major sources of income and have high cultural value. They are used in marriage ceremonies, and a festival is held annually to celebrate its harvest.
Consumers’ demand for yam is generally very high in this sub-region and yam cultivation is very profitable despite high production costs.
1.2 PROBLEM STATEMENT
The edible yams are root crop groom on a field scale for the tubers. They provide staple carbohydrate food in the yam zone of West Africa, where daily consumption is 0.5, 1.0kg yam need a great deal of labour for their cultivation and to prepare them for food and they are usually expensive to buy for normal human consumption, the field or peel, sometimes after partial boiling in West Africa, they are usually eaten as pounded yam which is prepared by peeling cut-up yam and boil before pounding them in a wooden mortal to produce a glutinous dough (pounded yam).
The chemical composition of yam tuber is as follows:
Water 70%
Starch 25%
Sugar 1%
Protein 1.2%
- JUSTIFICATION OF PROJECT
The most important justification of this project are as follows:
- The machine is being operated electrically
- Safety of the user comes first when constructing the machine
- The operation is hygienic and the machine can be cleaned with water after used
- Lubrication of the adjacent moving part is made possible through a channel to reduce frictional resistance
- The need to improve the country’s economy for if the machine is produced in large number they could be exported thereby improving our foreign trade and hence, earning of more foreign exchange.
- AIMS AND OBJECTIVS
The aims and objective of the project were:
- To design and develop a mechanical device which with rotary motion of the beaters perform the pounding operation which will be more efficient, less time consuming, with less human effort and of a greater hygienic processing.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "fabrication of yam pounding machine" is also available. Order full work to download. Chapter two of "fabrication of yam pounding machine" consists of the literature review. In this chapter all the related work on "fabrication of yam pounding machine" was reviewed.
CHAPTER THREE: The complete chapter three of "fabrication of yam pounding machine" is available. Order full work to download. Chapter three of "fabrication of yam pounding machine" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "fabrication of yam pounding machine" is available. Order full work to download. Chapter four of "fabrication of yam pounding machine" consists of all the test conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a "fabrication of yam pounding machine" is available. Order full work to download. Chapter five of "fabrication of yam pounding machine" consist of conclusion, recommendation and references.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No 
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address 
:engr4project@gmail.com
Watsapp No 
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No :+2348146561114
Email Address :engr4project@gmail.com
FOLLOW / VISIT US VIA:
