phonelogo+234 8146561114 or +2347015391124

THE ROLE OF COMMUNITY HEALTH PRACTITIONERS ON INJECTION SAFETY

USER'S INSTRUCTIONS: The project work you are about to view is on "the role of community health practitioners on injection safety". Please, sit back and study the below research material carefully. This project topic "the role of community health practitioners on injection safety" have complete 5(five) Chapters. The complete Project Material/writeup include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.Our aim of providing this "the role of community health practitioners on injection safety" project research material is to reduce the stress of moving from one school library to another all in the name of searching for "the role of community health practitioners on injection safety" research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works.


TITLE PAGE

THE ROLE OF COMMUNITY HEALTH PRACTITIONERS ON INJECTION SAFETY

BY

---
EE/H2013/01430
DEPARTMENT OF ----
SCHOOL OF ---
INSTITUTE OF ---

DECEMBER,2018



APPROVAL PAGE

This is to certify that the research work, "the role of community health practitioners on injection safety" by ---, Reg. No. EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --- has been approved.

By
---                                                     . ---
Supervisor                                                  Head of Department.
Signature……………….                           Signature……………….        

……………………………….
---
External Invigilator



DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless their entire endeavour Amen.



ACKNOWLEDGEMENT

The successful completion of this project work could not have been a reality without the encouragement of my --- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---, --- and many others who were quite helpful.


PROJECT DESCRIPTION: This work "the role of community health practitioners on injection safety" research material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We made Preliminary pages, Abstract and Chapter one of "the role of community health practitioners on injection safety" visible for everyone, then the complete material on "the role of community health practitioners on injection safety" is to be ordered for. Happy viewing!!!


ABSTRACT

Injection is one of the important health care procedures used globally to administer drugs. Its unsafe use can transmit various blood borne pathogens. This article aims to review the history and status of injection practices, its importance, interventions and the challenges for safe injection practice in developing countries. The history of injections started with the discovery of syringe in the early nineteenth century. Safe injection practice in developed countries was initiated in the early twentieth century but has not received adequate attention in developing countries. The establishment of “Safe Injection Global Network (SIGN)” was an milestone towards safe injection practice globally. In developing countries, people perceive injection as a powerful healing tool and do not hesitate to pay more for injections. Unsafe disposal and reuse of contaminated syringe is common. Ensuring safe injection practice is one of the greatest challenges for healthcare system in developing countries. To address the problem, interventions with active involvement of a number of stakeholders is essential. A combination of educational, managerial and regulatory strategies is found to be effective and economically viable. Rational and safe use of injections can save many lives but unsafe practice threatens life. Safe injection practice is crucial in developing countries. Evidence based interventions, with honest commitment and participation from the service provider, recipient and community with aid of policy makers are required to ensure safe injection practice.

TABLE OF CONTENTS

TITLE PAGE                                                                                                             I
ATTESTATION                                                                                                         II        
CERTIFICATION                                                                                                     III
DEDICATION                                                                                                           IV
ACKNOWLEDGEMENT                                                                                         V
ABSTRACT
INTRODUCTION                                                                                                                                                                                                                                                
CHAPTER ONE: INTRODUCTION                                                                                           
1.1       Background Information                                                                                 1                                                                                
1.2       Statement of the Problem                             2                                                                                            
1.3       Justification of the study               3                                                                                            
1.4       Objectives of the Study       3     
                                                                                       
CHAPTER TWO: LITERATURE REVIEW                                                     
2.1       Definition of injection, safe injection, unsafe injection                                  4-7                                          
2.2       Steps of giving safe injection                                                                          8                                                                       
2.3       Safe Choices matter                                                  11-12                                                         
2.4       Interventions and challenges for save injection practice                                13
2.5      Safe disposal of used injections equipments                 14                                                                                      
2.6   Training community health practitioners on injection safety              14-15                          
2.7Advocacy for injection safety      16                   
2.8Roles of other health progammes in promoting injection safety          17       

CHAPTER THREE: METHODOLOGY                                                                                       
3.0       METHODOLOGY                18               
                                                                                                    
CHAPTER FOUR: DISCUSSION                                                                        
4.0       DISCUSSION      19                               
                                                                        
CHAPTER FIVE: CONCLUSIONS                                                                    
5.0       CONCLUSIONS                         20
5.1     RECOMMENDATION                 21                                                                                                                                                                   
REFERENCES    22


CHAPTER ONE

1.1 BACKGROUND
Injection safety, or safe injection practices, is a set of measures taken to perform injections in an optimally safe manner for patients, healthcare personnel, and others. The Standard Precautions section of the 2007 Guideline for Isolation Precautions provides evidence- based recommendations for safe injection practices and reflects the minimum standards that healthcare personnel should follow to prevent transmission of infections in healthcare settings.(Brokensha,1999). Despite these recommendations, outbreaks and patient notifications resulting from healthcare personnel failing to adhere to Standard Precautions and basic infection control practices continue to be reported.(Bhattarai,2000). Unsafe injection practices that have resulted in disease transmission have most commonly included:(Brokensha,1999; Bhattarai,2000).
Using the same syringe to administer medication to more than one patient, even if the needle was changed or the injection was administered through an intervening length of intravenous (IV) tubing(Drucker,2001).
Accessing a medication vial or bag with a syringe that has already been used to administer medication to a patient, then reusing contents from that vial or bag for another patient   Using medications packaged as single-dose or single-use for more than one patient  Failing to use aseptic technique when preparing and administering injections  For these reasons, CDC reminds healthcare personnel of thefollowing practices that are critical for patient safety(Reeler,1990):
Never administer medications from the same syringe to more than one patient, even if the needle is

  • changed or you are injecting through an intervening length of IV tubing.
  • Do not enter a medication vial, bag, or bottle with a used syringe or needle.
  • Never use medications packaged as single-dose or single-use for more than one patient. This includes ampoules, bags, and bottles of intravenous solutions.
  • Always use aseptic technique when preparing and administering injections.

  • 1.2       STATEMENT OF THE PROBLEM

According to the WHO(2004), the most recent study indicates that each year, unsafe injections cause an estimated 1.3 million early deaths, a loss of 26 million years of life, and an annual burden of USD 535 million in direct medical costs. Unsafe injection practices are a powerful engine to transmit blood-borne pathogens, including hepatitis B virus (HBV), hepatitis C virus (HCV) and human immunodeficiency virus (HIV). Because infection with these viruses initially presents no symptoms, it is a silent epidemic. However, the consequences of this are increasingly recognized.
Hepatitis B virus: HBV is highly infectious and causes the highest number of infections: in developing and transitional countries 21.7 million people become infected each year, representing 33% of new HBV infections worldwide WHO(2004).
Hepatitis C virus: Unsafe injections are the most common cause of HCV infection in developing and transitional countries, causing two million new infections each year and accounting for 42% of cases. WHO(2004).
Reuse of syringes and needles in the absence of sterilization exposes millions of people to infections. Assessments carried out in numerous countries have revealed that syringes and needles are often just rinsed in a pot of tepid water between injections. WHO(2004).

Many injections around the world are unnecessary and often unsafe. Unsafe injections put lives at risk and every year cause 1.67 million hepatitis B infections, up to 315 120 hepatitis C infections and up to
33 877 human immunodeficiency virus (HIV) infections.(WHO,2015)1,2 The World Health Organization (WHO,2015) Guidelines recommend rational use of injections, safe injection practices and the exclusive use of safety-engineered syringes for all types of injections by 2020. Safety- engineered syringes exist for both immunization and therapeutic use and have mechanisms preventing re-use of the device [re-use prevention(RUP) syringe] and/or protecting health care providers from needle-stick injuries [sharp injury protection (SIP) feature]. Prescribers and health care providers have a key role to play in making the right choices that support safe injections and reduce unnecessary injections.

1.3       JUSTIFICATION OF THE STUDY
The study was conducted to highlight and show the clearly the important of safe injection practice and also show the implications and risks of practicing unsafe injection procedures to other community health practitioners that did not adhere safe injection practice.

1.4       OBJECTIVES OF THE STUDY
The objectives of this study are to:
1.         Review the status of safe injection practice
2.         Highlight importance of safe injection practice and
3.         Mention interventions and highlight the challenges towards safe injection practice in Nigeria.
4.         To examine the injection safety measures put in place by the community health practitioners.

1.5                                                         PROJECT ORGANISATION
The work is organized as follows: chapter one discuses the introductory part of the work,   chapter two presents the literature review of the study,  chapter three describes the methods applied,  chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.


CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of "the role of community health practitioners on injection safety" is also available. Order full work to download. Chapter two of "the role of community health practitioners on injection safety" consists of the literature review. In this chapter all the related work on "the role of community health practitioners on injection safety" was reviewed.

CHAPTER THREE: The complete chapter three of "the role of community health practitioners on injection safety" is available. Order full work to download. Chapter three of "the role of community health practitioners on injection safety" consists of the methodology. In this chapter all the method used in carrying out this work was discussed.

CHAPTER FOUR: The complete chapter four of "the role of community health practitioners on injection safety" is available. Order full work to download. Chapter four of "the role of community health practitioners on injection safety" consists of all the test conducted during the work and the result gotten after the whole work

CHAPTER FIVE: The complete chapter five of design and construction of a "the role of community health practitioners on injection safety" is available. Order full work to download. Chapter five of "the role of community health practitioners on injection safety" consist of conclusion, recommendation and references.

 

CLICK HERE FOR MORE RELATED TOPICS/MATERIAL


To "DOWNLOAD" the complete material on this particular topic above click "HERE"

Do you want our Bank Accounts? please click HERE

To view other related topics click HERE

To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE

Do you want us to research your new topic? if yes, click "HERE"

Do you have any question concerning our post/services? click HERE for answers to your questions


For more information contact us through any of the following means:

Mobile No phonelogo:+2348146561114 or +2347015391124 [Mr. Innocent]

Email address emailus:engr4project@gmail.com

Watsapp No whatsapp.html :+2348146561114


COUNTRIES THAT FOUND OUR SERVICES USEFUL

Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand, Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom, Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124

Watsapp Nowhatsapp.html
:+2348146561114


E
mail Address emailus:engr4project@gmail.com


FOLLOW / VISIT US VIA:

tweeter instagram.htmlfacebook logo

Order Full Material(s)
Download Full Material(s)
Bank Accounts

Contact us

Hire a writer

Order/learn construction


View other related topics

Vrequently asked questions(FAQ)
View more related topics and download more material
Format = microsoft word

Chapters = 1-5 chapters


Price: N3,000.
»Accountancy (AC) project
» Agric engineering project topics
» Business admin and management project
» Banking and finance project
» Civil engineering project
» Co-operative economics and management project
» Computer science project
» Community Health Project
» Electrical/electronic/telecom/ power project
» Estate management project
» Education
» Human Kinetics & Health Education Project
» Industrial safety and environmental (ISET) project
» Mass communication project
» Mechanical engineering (ME) project
» Medical And Health Science Project
» Office technology and management (O.T.M) project
» Public administration (PA) project
» Public Health Education Project Topics
» Paramedic Project Topics
» Industrial Physics/Physics Electronics Project
» Science laboratory technology (microbiology option) project
» Agricultural science and engineering seminar
» Building engineering seminar topics/materials
» Civil engineering seminar topics
» Computer science seminar topics
» Environmental seminar topics
» Electrical/electronic/telecom/ power seminar
» Mechanical engineering seminar
» Physics / industrial physics/physics electronics seminar topics/materials