+234 8146561114 or +2347015391124 This is page 9 of ELECTRICAL/ELECTRONIC/TELECOM/ POWER ENGINEERING department project topics and materials. Hyclassproject's aim of providing all these research materials is to reduce the stress of moving from one school library to another all in the name of searching for project topics and materials. We are not encouraging any form of PLAGIARISM. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works. According to Austin Kleon "All creative work builds on what came before", and according to Bishop Dr. David Oyedepo "You cannot be a Reference without having References".
Below are the continued list of our avaliable project topics/write-up. To view or download the complete work on each of the following works, click on the topic or on the useful links menu at the bottom part of this page:
[2401]. FABRICATION OF A 200W 24V MONOCRYSTALLINE SOLAR PANEL: This work is on fabrication of a 200W/24V monocrystalline solar panel. Monocrystalline solar panel converts the variable direct current (DC) output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be fed into a commercial electrical grid or used by a local, off-grid electrical network....READ AND DOWNLOAD
[2402]. POWER TRANSFORMER PROTECTION USING ARDIUNO-UNO: In this paper, present a “Arduino based power transformer protection” main attention is to reduced or overcome the fault occurred in the transformer. To prevent the transformer from the fault due to the over- currents, temperature rise in transformers oil and over voltage we used relay and sensor...READ AND DOWNLOAD
[2403]. DESIGN AND CONSTRUCTION OF A SOLAR MOBILE CHARGER: This project is titled the design and construction of a solar mobile charger. It is designed to meet up with the higher demand of power supply needed to keep our cell phone battery charged...READ AND DOWNLOAD
[2404]. DESIGN AND CONSTRUCTION OF AN AUTOMATIC ROOM LIGHT CONTROLLER WITH BIDIRECTIONAL VISITOR COUNTER: This Project "Automatic Room Light Controller with Bidirectional Visitor Counter” is a reliable circuit that takes over the task of controlling the room lights as well us counting number of persons / visitors in the room very accurately...READ AND DOWNLOAD
[2405]. DESIGN AND CONSTRUCTION OF AN FM CONTROL ELECTRICAL APPLIANCES: This device is design to monitor and control electrical devices remotely using fm transmitter circuit. The transmitter circuit provides the communication mechanism between the user and the system by means of RF signal. ...READ AND DOWNLOAD
[2406]. DESIGN AND CONSTRUCTION OF AUTOMATIC OVER AND UNDER VOLTAGE PROTECTION SYSTEM FOR HOUSEHOLD USING MICROCONTROLLER ( ARDUINO UNO): This paper presents a new design for over/under voltage (OV/UV) protection scheme using Arduino microcontroller. The protection scheme is designed to protect the solid-state transformer (SST) branch of a Future Renewable Electric Energy Delivery and Management (FREEDM) system...READ AND DOWNLOAD
[2407]. DESIGN AND CONSTRUCTION OF A DOT MATRIX INFORMATION DISPLAY SYSTEM: This work is on design, construction and working of a Dot Matrix Information Display. The project covered a fairly comprehensive study of a Dot Matrix Information Display. Digital instruments, signals, and related numbers and codes were discussed...READ AND DOWNLOAD
[2408]. HUMAN PRESENCE AUTOMATED ELECTRIC BULB SWITCH WITH PROXIMITY SENSOR: An automatic electric light switching system with proximity sensor system detects moving objects, particularly people. An automatic security light control and motion detection system is often integrated as a component of a system that automatically performs a task or alerts a user of motion in an area...READ AND DOWNLOAD
[2409]. DESIGN AND CONSTRUCTION OF A 4-CHANNEL AUDIO MIXER: An audio mixer is an electronic device for combining, and modifying audio signals. The modified audio signals are summed to produce some combined output signals. This project is titled design and construction of a 4-channel microphone mixer...READ AND DOWNLOAD
[2410]. DESIGN AND CONSTRUCTION OF A DC SOLDERING IRON: This work is on a dc soldering iron. A dc soldering iron joins two metal work pieces by means of a third metal (solder) at a relatively low temperature, which is above the melting point of the solder but below the melting point of either of the materials being joined. This device composes of a heating element, and a copper tip....READ AND DOWNLOAD
[2411]. DESIGN AND CONSTRUCTION OF A MOSQUITO INSECT KILLER: This work is on a mosquito insect killer. It is an Indoor and outdoor insect killer which gives an environmentally friendly strategy for getting rid of mosquitoes from your outdoors and your indoor environment. This device contains extraordinarily successful UV (Ultraviolet) lights that attract the mosquitoes and diverse dreadful little creatures towards it....READ AND DOWNLOAD
[2412]. DESIGN AND CONSTRUCTION OF A SENSITIVE CLAP ACTIVATED SWITCH: Sensitive Clap activated switch is an electronics device that can switch on & off a light, Fan, Radio or any other appliance by the sound of clap. This is the system of a very sensitive clap switch. It switches ON/OFF a White LED or electrical appliances through claps. The circuit can sense the sound of claps from a distance of 1-2 meters. Condenser Mic picks up sound vibrations caused by the clap....READ AND DOWNLOAD
[2413]. DESIGN AND CONSTRUCTION OF AN AUDIO EQUALIZER AMPLIFIER: This work is on audio equalizer. An equalizer allows the sound in specified frequency bands to be amplified or reduced, in order to adjust the quality and character of the sound. There are different types of equalizer for various uses, such as the parametric equalizers that are controlled using the knobs built into each mixer channel, or the graphic equalizers that allow multiple frequency bands to be adjusted using sliders...READ AND DOWNLOAD
[2414]. DESIGN AND CONSTRUCTION OF AN AUTOMATIC TEMPERATURE CONTROLLED FAN SPEED USING THERMISTOR: An automatic temperature controlled fan speed is designed with microcontroller is quite useful for conference halls, auditoriums, cinema halls, and other commercial organizations where many people gathered together, and lot of fans are required at these places. Depending up on the weather condition, organizers of the above places are supposed to be control each and every fan, otherwise lot of energy will be wasted...READ AND DOWNLOAD
[2415]. DESIGN AND CONSTRUCTION OF AN ELECTRONICS NOTICE BOARD USING LED: This project work is on an electronic notice board using LED which is an electronic display used in advertising and distribution of information in public and private locations. The displays are seen mainly in many public places such as airports, train stations, and shopping malls. In this work, signs uses technology such as LED to display information and can be found in public spaces, transportation systems, museums, stadiums, retail stores, hotels, restaurants, and corporate buildings...READ AND DOWNLOAD
[2416]. DESIGN AND CONSTRUCTION OF LED DISPLAY SYSTEM:This project work is on an “LED DISPLAY SYSTEM” which is an electronic display used in advertising and distribution of information in public and private locations. The displays are seen mainly in many public places such as airports, train stations, and shopping malls...READ AND DOWNLOAD
[2417]. DESIGN AND CONSTRUCTIONS OF PORTABLE RECHARGEABLE BACK UP POWER SUPPLY SYSTEM: Portable rechargeable back up power supply system comprises of a special battery in a special case with a special circuit to control power flow. They allow you to store electrical energy (deposit it in the bank) and then later use it to charge portable and mobile devices such as laptop via the laptop charger....READ AND DOWNLOAD
[2418]. DESIGN AND CONSTRUCTION OF A WIRELESS LAMP CONTROL USING BLUETOOTH: Wireless control system uses information technology to monitor and control ON and OFF of a lamp. The system is based on the embedded system and can act as a security guard to the home lamps. The whole system is a cheaper one, but it provides the full-scale home device monitor and control function...READ AND DOWNLOAD
[2419]. WIRELESS POWER TRANSFER THROUGH COIL: As power requirements for portable devices increase, consumers are looking for easy-to-use charging solutions that can be deployed in a wide array of environments such as home, office, automobiles, airports, schools and more. Wireless charging uses an electromagnetic field to transfer energy between two objects...READ AND DOWNLOAD
[2420].DESIGN AND CONSTRUCTION OF A MULTIPURPOSE LISTENING DEVICE: This multipurpose listening device can detect very faint, remote sounds with a good clarity. It is useful in large conference halls, auditoria, cinema halls, lecture rooms in colleges, etc. The circuit can be housed in a small plastic box and kept in a shirt pocket. It is especially useful for watching TV programs at a low volume so as not to disturb other family members in the house...READ AND DOWNLOAD
[2421]. ELECTRICC ARC WELDING MACHINE: In the past with the necessary of metals it always seems impossible to join two metals together with grooving riveting, this idea leads to alternative of finding a lasting solution to the problem. This brought about the idea of a welding machine with a well laminated core and coil wound together to form a high rated transformer which is immersed in a can of oil...READ AND DOWNLOAD
[2422]. DESIGN AND CONSTRUCTION OF A REMOTE CONTROLLED TRI–BAND FREQUENCY JAMMER: A mobile phone jammer or signal blocker is an instrument used to prevent cellular phones from receiving signals from base stations. The process of blocking the receiver to receive a transmitted signal is called Jamming of the signal. The jammer effectively disallows cellular phone signal when activated...READ AND DOWNLOAD
[2423]. DESIGN AND CONSTRUCTION OF AUTOMATIC CHANGE-OVER FOR THREE PHASES: Power instability in developing countries creates a need for automation of electrical power generation or alternative sources of power to back-up the utility supply. This automation is requiring as the rate of power outages become predominantly high. Research in the field of electrical electronics engineering has led to the tremendous discovers and inventions especially in the area of automation and power control...READ AND DOWNLOAD
[2424]. DESIGN AND CONSTRUCTION OF ELECTRONIC SCROLLING MESSAGE DISPLAY BOARD WITH BACK UP BATTERY: Communication has become inevitable and vital thing in this present age, it is even believed to be a commodity meant for consumption by any targeted audience. One of the important qualities possessed by all animals is the ability to communicate with each other or one another at a given time...READ AND DOWNLOAD
[2425]. REAL TIME SCHOOL BUS TRACKING SYSTEM USING (RFID): In present time due to increase in number of kidnapping and road accident cases, parent always worry about their children. This paper proposes a SMS based solution to aid parent to track their children location in real time...READ AND DOWNLOAD
[2426]. DESIGN AND CONSTRUCTION OF A HYBRID UPS: Electricity is the principal force that powers modern society. It lights buildings and streets, runs computers and telephones, drives trains and subways and operates all variety of motors and machines (“Powering a Generation”, 2014).It is important to recognize that electricity is not mined or harvested, it must be manufactured. Since it is not easily stored in quantity, it must be manufactured at the time of demand...READ AND DOWNLOAD
[2427]. DESIGN AND CONSTRUCTION OF A BUS MONITORING AND TRACKING SYSTEM USING RFID: Millions of children needs to be mould from home to school and via verra everyday. For parents, obtaining a safe transport for their children is a crucial issue. The students ride their bicycle getting to and from school safety...READ AND DOWNLOA
[2428]. CONSTRUCTION OF AUTOMATIC PHASE CHANGER: Raw power instability in developing countries creates a need for automation of electrical power generation or alternative sources of power to back up the utility supply. This automation is required as the rate of power outage becomes predominantly high...READ AND DOWNLOAD
[2429]. DESIGN AND CONSTRUCTION OF 2KVA INVERTER: An inverter is an electronics device or circuitry that changes direct current (D.C) to Alternating current [AC]. The device make used of an in–built automatic circuit to achieve a complete automation of the entire system. The input voltage, output voltage, frequency and overall power handling depend on the design of a specific device or circuitry...READ AND DOWNLOAD
[2430]. DESIGN AND CONSTRUCTION OF A DIGITAL CLOCK WITH CALENDAR: This project is aimed at explaining the Design and construction of a digital wall clock with calendar. It give report on how we can achieve this aim and the primary objective of this work is to bring a vibrant digital clock display to everyone located within the vicinity where the clock is being installed, and the importance of clock is to tell time and date, so you can meet up with events and assignments, these are just few importance of CLOCK...READ AND DOWNLOAD
[2431]. DESIGN AND CONSTRUCTION OF AUTOMATIC CHANGE-OVER FOR THREE PHASES: The main aim of any electric power supply in the world is to provide uninterrupted power supply at all times to all its consumers. Although in developing countries, the electric power generated to meet the demands of the growing consumers of electricity is insufficient hence instability and outage...READ AND DOWNLOAD
[2432]. DESIGN AND CONSTRUCTION OF A BATTERY LEVEL INDICATOR: Battery level indicator indicates the status of the battery just by glowing LED’s. For example six LED’s are glowing means battery capacity 60% remains. This article explains you how design battery level indicator. You can use this circuit to check car battery or inverter. So by using this circuit, we can increase the lifetime of battery...READ AND DOWNLOAD
[2433]. DESIGN AND CONSTRUCTION OF A BLUETOOTH BASED SPEAKER WITH MICROPHONE PORT AND MP3: Speaker with Bluetooth microphone port and mp3 stereo audio system—one that’s also fairly low-cost—for outdoor use. This device provides the easiest way to play music off your smartphone to a speaker unit...READ AND DOWNLOAD[2433]. DESIGN AND CONSTRUCTION OF AN ELECTRONIC WARNING TRIANGLE: An improved structure of an electronics triangle which has many holes inside the triangle for plugging in the bright red LED's, said electronics warning triangle having a reflecting plate and a transparent plate together. The electronics triangle has tight washers to seal the holes containing the LED's to achieve the goal of a water-proof device...READ AND DOWNLOAD
[2434]. DESIGN AND CONSTRUCTION OF BIOMETRIC SECURITY SYSTEM USING FINGERPRINT: Authentication plays a very critical role in security-related applications like e-commerce. There are a number of methods and techniques for accomplishing this key process. In this regard, biometrics is gaining increasing attention these days...READ AND DOWNLOAD
[2435]. DESIGN AND CONSTRUCTION OF DIGITAL CLOCK: Digital clock project is developed for the users to use a digital clock. The main parts of this project are set switch, microcontroller unit and LCD display...READ AND DOWNLOAD
[2436]. DESIGN AND CONSTRUCTION OF A MAXIMUM POWER POINT TRACKING (MPPT) CONTROLLER: This work covers the design and construction of a "Maximum Power Point Tracking" as used in solar electric charge controllers. An MPPT, or maximum power point tracker is an electronic DC to DC converter that optimizes the match between the solar array (PV panels), and the battery bank or utility grid...READ AND DOWNLOAD
[2437]. STUDY OF A VOLTAGE /FREQUENCY RATIO METHOD OF SPEED CONTROL FOR THREE PHASE INDUCTION MOTORS: Higher percentage of electrical energy is consumed by electric motors in loads like variable torque fan, pump and compressor. Induction motors are the most important workhorses in industry and they are manufactured in large numbers...read more and download here
[2438]. DESIGN AND CONSTRUCTION OF AN AUTOMATIC 3 PHASE SUPPLY MONITORING SYSTEM WITH HIGH AND LOW VOLTAGE PROTECTION: This project work is on the “automatic 3 phase supply monitoring system with high and low voltage protection”...read more and download here
[2439]. DESIGN AND CONSTRUCTION OF AN AUTOMATIC NIGHT LAMP USING TRANSISTOR: This work is on auto night lamp using high power LED. An Automatic Night Lamp Using High Power LEDs is a circuit which turns ON the LED lights interfaced to it at night time and it turns OFF the lights automatically when it is day...read more and download here
[2440]. DESIGN AND CONSTRUCTION OF VOLTAGE INVERTER SYSTEM WITH TRICKLE CHARGING SYSTEM: Inverter is an uninterrupted power supply which conversed from D.C to AC voltage with the help of an oscillator. This inter section consist of two stages of switching circuits which comprises of a power transistor connected in the common emitter configuration...read more and download here
[2441]. DESIGN AND CONSTRUCTION OF A 2.5KVA INTERRUPTIBLE POWER SUPPLY: The purpose of this project is to design and construct an uninterruptible power supply. Uninterruptible power supply is a voltage regulatory and uninterruptible power device planned to electromechanically sustain a constant voltage level and supply an uninterruptible power to devices...read more and download full material
[2442]. DESIGN AND CONSTRUCTION OF A 7.5KVA SOLAR INVERTER: Power inverter is an electrical appliance that can be used with solar energy from solar panel as an alternative source of energy supply in the event of power failures and energy crisis. It is cheap, clean, very conducive and silent when in operation and a very reliable source of power supply as to generator. Modern research and technologies have shown that inverter is one of the cheapest forms of energy generatio...read more and download full material
[2443]. ANALYSIS OF EARTHING SYSTEM IN POWER DISTRIBUTION NETWORK: Power system equipment are very expensive, and so a very large capital investment. To maximize the return on this outlay, the system must be utilised as much as possible within the applicable constraints of security and reliability of supply...read more and download full material
[2444]. ASSESSMENT OF SOIL RADIONUCLIDE LEVEL IN ILORIN, KWARA STATE: A study of soil radionuclide from Ilorin, Nigeria, has been carried out and it was analyzed by g-ray spectroscopy to determine the 226Ra and 228Ra concentrations. The activity concentration values range from 0.81 ± 0.08 to 7.4 ± 2.2 Bq/l for 226Ra and from 1.8 ± 0.3 to 5.6 ± 2.6 Bq/l for 228Ra...read more and download full material
[2445]. ATTITUDE OF WORKING MOTHERS TOWARDS EXCLUSIVE BREAST FEEDING IN GENERAL HOSPITAL UGHELLI: In delta state Nigeria, periodic national surveys report the practice of exclusive breastfeeding (EBF) in the general population to be over 50 %. However, little is known about EBF among professional working mothers, particularly its duration after maternity leave. Female workers are entitled to 12 weeks (84 days) of maternity leave with full pay in Nigeria, and this can be extended by two additional weeks in case of a caesarean or abnormal delivery...read more and download full material
[2446]. CONSTRUCTION OF A DIGITAL POINTING DEVICE (MOUSE): This work is on digital pointing device, which is also known as digital mouse. Mouse is known as an input device of computer which helps to control cursor that is visible on the computer screen while moving the mouse on flat surface place...read more and download full material
[2447]. CONSTRUCTION OF 12 VOLT AUTOMATIC BATTERY CHARGER WITH CHARGING PROGRESS AND CHARGING LEVEL INDICATORS: This project is on a 12volts automatic battery charger with charging progress and charging level indicator. This work is aimed at building an automatic battery charger which comprises of indicators that indicates charging process and charging level indicator...read more and download full material
[2448]. DESIGN AND CONSTRUCTION OF A 500KVA SOLAR INVERTER: This work is on design and construction of a 500KVA solar power system. This is a grid tie solar system that converts the variable direct current (DC) output of a photovoltaic...read more and download full material
[2449]. CONSTRUCTION OF MICROCONTROLLER BASE WATER LEVEL INDICATOR WITH AUTOMATIC PUMP CONTROLLER: This project presents the concept of a control system into an automatic water pump controller. One of the motivations for this project is the need to bring a solution to the problem of water shortage in various places eliminating the major culprit, waste of water during pumping and dispensing into overhead tanks...read more and download full material
[2450]. CONSTRUCTION OF A PROPENE GAS LEAKAGE WARNING SYSTEM USING AUDIO, VISUAL AND GSM DETECTION: As we know, security has been major issue in today’s scenario. Fire accidents are on increasing day by day. Here, we are talking about those accidents that are being occurred due to combustible gases, i.e., LPG, CNG. Frequently we hear, explosion in cylinder of household and vehicles...read more and download full material
[2451]. CONSTRUCTION OF A PROPENE GAS LEAKAGE WARNING SYSTEM USING AUDIO, VISUAL AND GSM DETECTION: As we know, security has been major issue in today’s scenario. Fire accidents are on increasing day by day. Here, we are talking about those accidents that are being occurred due to combustible gases, i.e., LPG, CNG. Frequently we hear, explosion in cylinder of household and vehicles...read more and download full material
[2452]. CONSTRUCTION OF A SOLAR STANDING FAN WITH REMOTE CONTROL AND BATTERY INDICATOR: This work is on solar standing fan with remote control and battery level indicator. The project involves using solar energy to power standing fan. Rechargeable solar standing fan, charges with solar energy. Standing solar fan operated either by solar panel and battery...read more and download full material
[2453] EFFECT OF CUTTING PARAMETERS ON SURFACE ROUGHNESS OF MILD CARBON STEEL DURING TURNING OPERATIONS: Cutting fluid play a very important role in machining but it also brings a lot of detrimental effects such as health hazards and environmental pollutions when it handled improperly...read more and download here
[2454]. DESIGN AND CONSTRUCTION OF A 1KVA MOBILE SOLAR GENERATOR: This work is on design and construction of a 1KVA mobile solar generator. Mobile solar generator converts the variable direct current (DC) output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be fed into a commercial electrical grid or used by a local, off-grid electrical network...read more and download full material
[2455]. CONSTRUCTION OF MICROCONTROLLER BASE WATER LEVEL INDICATOR WITH AUTOMATIC PUMP CONTROLLER: This project presents the concept of a control system into an automatic water pump controller. One of the motivations for this project is the need to bring a solution to the problem of water shortage in various places eliminating the major culprit, waste of water during pumping and dispensing into overhead tanks...read more and download full material
[2456]. DESIGN AND CONSTRUCTION A LITHIUM BATTERY CHARGER: This work is on a lithium battery charger which is designed to charge lithium batteries and other portable devices. This charger gives constant current and constant voltage for charging battery and also the voltage range and current value can be changed depending on the voltage of the battery under charge...read more and download full material
[2457]. DESIGN AND CONSTRUCTION OF A 2.5KVA PURE SINE WAVE INVERTER: This project is titled the design and construction of a 2.5Kva pure sine wave inverter system with battery feed indicator. Pure sine wave inverters produce a pure sine wave output. This means the power output from a pure sine wave inverter is the same as the mains supply...read more and download full material
[2458]. DESIGN AND CONSTRUCTION OF A 3.5KVA PURE SINE WAVE INVERTER: This project is titled the design and construction of a 3.5Kva pure sine wave inverter system with battery feed indicator. Pure sine wave inverters produce a pure sine wave output. This means the power output from a pure sine wave inverter is the same as the mains supply...read more and download full material
[2459] DETECTION OF POWER GRID SYNCHRONIZATION FAILURE ON SENSING FREQUENCY AND VOLTAGE BEYOND ACCEPTABLE RANGE: The project is designed to develop a system to detect the synchronization failure of any external supply source to the power grid on sensing the abnormalities in frequency and voltage...read more and download here
[2460]. DESIGN AND CONSTRUCTION OF A 3.5KVA PURE SINE WAVE INVERTER:This project is titled the design and construction of a 3.5Kva pure sine wave inverter system with battery feed indicator. Pure sine wave inverters produce a pure sine wave output. This means the power output from a pure sine wave inverter is the same as the mains supply...read more and download full material
[2461]. DESIGN AND CONSTRUCTION OF A CLAP ACTIVATED SWITCH: Clap activated switch is an electronics device that can switch on & off a light, Fan, Radio or any other appliance by the sound of clap. This is the system of a very sensitive clap switch. It switches ON/OFF a White LED or electrical appliances through claps. The circuit can sense the sound of claps from a distance of 1-2 meters. Condenser Mic picks up sound vibrations caused by the clap...read more and download full material
[2462]. DESIGN AND CONSTRUCTION OF A CAR FIGHTING ROBOTS WITH ROBOTIC ARM: Fire-fighting is an important but dangerous occupation. A fire-fighter must be able to reach the situation quickly and safely extinguish the fire, preventing further damage and reduce fatalities. Technology has come to rescue this issue, firefighters and machines are now having more efficient and effective method of firefighting...read more and download full material
[2463]. DESIGN AND CONSTRUCTION OF A DIGITAL SOIL MOISTURE SENSOR: This work is on a digital soil moisture sensor. Soil moisture sensors measure the volumetric water content in soil. Since the direct gravimetric measurement of free soil moisture requires removing, drying, and weighing of a sample, soil moisture sensors measure the volumetric water content indirectly by using some other property of the soil, such as electrical resistance, dielectric constant, or interaction with neutrons, as a proxy for the moisture content...read more and download full material
[2464]. DESIGN AND CONSTRUCTION OF A CLAP ACTIVATED SWITCH USING 555 TIMER AND CD 4017: Sensitive Clap activated switch is an electronics device that can switch on & off a light, Fan, Radio or any other appliance by the sound of clap. This is the system of a very sensitive clap switch. It switches ON/OFF a White LED or electrical appliances through claps. The circuit can sense the sound of claps from a distance of 1-2 meters...read more and download full material
[2465]. DESIGN AND CONSTRUCTION OF A CLAP ACTIVATED SWITCH: Clap activated switch is an electronics device that can switch on & off a light, Fan, Radio or any other appliance by the sound of clap. This is the system of a very sensitive clap switch. It switches ON/OFF a White LED or electrical appliances through claps. The circuit can sense the sound of claps from a distance of 1-2 meters. Condenser Mic picks up sound vibrations caused by the clap...read more and download full material
[2466]. DESIGN AND CONSTRUCTION OF A DARK ACTIVATED SWITCH USING LIGHT DEPENDENT RESISTOR: This work is aimed at activating a switch or AC lamp at sunset and deactivate it at sunrise.This Dark activated Switch can trigger a relay to operate an AC lamp at Sunset. The lamp remains on till morning and then turns off. This eliminates the need of switching the Porch lamp or Backyard lamp daily and also helps to light the premises of the house when the occupants are out of station...read more and download full material
[2467]. DESIGN AND CONSTRUCTION OF A DC - DC CONVERTER: DC to DC converter is an electronic circuit which converts a source of direct current (DC) from one voltage level to another. Every electronic system is designed to operate from a supply voltage, which is usually assumed to be constant...read more and download full material
[2468]. DESIGN AND CONSTRUCTION OF A FOUR-WAY REMOTE CONTROL USING ARDUINO UNO: The main objective of this project is to develop a four channel remote control system using an Arduino board. As technology is advancing so houses are also getting smarter. Modern houses are gradually shifting from conventional switches to centralized control system, involving remote controlled switches...read more and download full material
[2469] DESIGN, CONSTRUCTION AND EXPERIMENTAL PERFORMANCE ANALYSIS OF 1.5KVA VARIABLE DC TO CONSTANT AC SINGLE PHASE INVERTER: Solar energy is considered as fastest growing renewable energy source after wind energy for electricity generation...read more and download here
[2470]. DESIGN AND CONSTRUCTION OF A ENERGY SAVED RECHARGEABLE LANTERN: Since the invention of electricity by Michael faraday, Man has been so used to electricity that he cannot do without it. The absence of electricity causes a lot of sadness in our daily lives. Due to this reason I decided to work on a by rechargeable lamp as my project...read more and download full material
[2471]. DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED CAPACITANCE METER: Capacitors are one of the most common passive electrical components that are extensively used in all kinds of electronic circuits. In this project, we will discuss a technique of building a digital capacitance meter using a PIC microcontroller...read more and download full material
[2472]. DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED STADIOMETER: The project is aimed at designing a portable electronic device for human height measurement with the use of a microcontroller and ultrasonic transducers...read more and download full material
[2473]. DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED STADIOMETER: The project is aimed at designing a portable electronic device for human height measurement with the use of a microcontroller and ultrasonic transducers. Ultrasonic transducers use ultrasound wave having frequency being greater than the upper limit of human hearing...read more and download full material
[2474]. DESIGN AND CONSTRUCTION OF A SOLAR COOKER: The sun’s energy is really powerful. Solar energy is renewable and it’s free. We can use it to make electricity, to heat buildings and to cook. The field of cooking consumes many fossil fuels such as gas and wood. Million people cannot find enough gas and/or wood to cook, so using solar cookers is a good idea. During this work, we designed, built and studied a parabolic solar cooker...read more and download full material
[2475]. DESIGN AND CONSTRUCTION OF AN AUTOMATED GUIDED VEHICLE: This work is on the study of automated guided vehicle (AGV) systems. Nowadays the creations of Automated Guided Vehicle (AGV) system can be found from all over the countries, as it give many advantages in our lives...read more and download full material
[2476]. DESIGN AND CONSTRUCTION OF FORWARD AND REVERSE CONTROL OF AN AC MOTOR USING TIMER RELAY: Manually, the direction of rotation of any three-phase motor can be reversed by changing any of the motor leads. Since the motor is connected to the power line regardless of which direction it operates...read more and download full material
[2477]. DESIGN AND CONSTRUCTION OF FORWARD AND REVERSE DIRECT ONLINE MOTOR STARTER: A direct on line starter, often abbreviated DOL starter is an electrical/electronic circuit composed of electro-mechanical and electronic devices which are employed to start and stop an electric motor...read more and download full material
[2478]. DESIGN AND CONSTRUCTION OF POWER RESTORATION REMINDER USING A PIEZO-BUZZER AND LED LAMP: Power restoration is a period of time when the electricity supply to a particular building or area is restored, for example because of replacement or servicing damage to the cables or any other reason...read more and download full material
[2479]. DESIGN AND FABRICATION OF HEAT TREATMENT FURNACE: Metallic materials consist of a microstructure of small crystals called “grains” or crystallites. The nature of the grains is one of the most effective factors that can determine the overall mechanical behavior of the metal...read more and download full material
[2480]. REACTIVE POWER COMPENSATION IN HIGH VOLTAGE TRANSMISSION LINE: Transmission systems are becoming increasingly stressed because of growing demand and because of restrictions on building new lines. However, most high voltage transmission systems are operating below their thermal rating due to such constraints as stability limits...read more and download full material
[2481]. SOLAR OUTDOOR SURVEILLANCE CCTV CAMERA: The implementation and use of an outdoors solar powered surveillance (Closed Circuit Television technology) in societies across the globe has become a standard and reliable way of securing out environment...read more and download full materia
[2482]. STUDY OF EFFECT OF VOLTAGE INSTABILITY ON AFAM GENERATION STATION: Voltage Instability is another stability problem that may manifest under heavy loading conditions. This problem causes extremely low voltages. It stems due to the actions of loads to demand power which is beyond the capability of the generators and the transmission network...read more and download full material
[2483]. STUDY OF IMPACT OF FREQUENCY DEVIATION ON POWER SYSTEM: The operation and the development of power system networks introduce new types of stability problems. The effect of the power generation and consumption on the frequency of the power system can be described as a demand/generation imbalance resulting from a sudden increase/decrease in the demand and/or generation...read more and download full material
[2484]. DESIGN AND CONSTRUCTION OF AN AUTOMATIC LED STREET LIGHT USING ELECTRONICS LDR AND PIR SENSOR: Automatic street light control system is used inmodern world for energy savings by using Light dependentResistor (LDR).Nowadays the human has not enough time,and he/she is unable to find time even to switch the light sonor off...read more and download full material
[2485]. DESIGN AND CONSTRUCTION A 2KVA ARDUINO BASED AUTOMATIC VOLTAGE REGULATOR: This work is on a 2kva Automatic Voltage regulator. It is designed to meet up with the AC voltage safety, stability and accuracy demand in industries and in homes. Voltage regulators are useful in devices such as computer Power supplies, alternators and central power station generator plants, voltage stabilizer control the output of the plant...read more and download full material
[2486]. PROGRAMMABLE CONTROLLERS AND THEIR PROGRAMMING: Programmable controllers are known as the most widely used electronic devices in the control of production and assembly process in most automated factories due to its simplicity and versatility...read more and download full material
[2487]. ASSESSMENT OF NUTRITIONAL STATUS IN GERIATRIC PATIENTS: Although malnutrition risk is well documented in elderly care institutions, few studies have been conducted to address concerns regarding community-dwelling elderly people...read more and download full material
[2488]. ASSESSMENT OF PARAMETRICISM IN MUSEUM BUILDING DESIGNS: Theories have helped architecture to evolve and transform a long way since ages. A new specialist design role is rising in the construction. Industry for museum building designs...read more and download full material
[2489] DESIGN OF INTELLIGENT WIRELESS CONTROLLER SYSTEM FOR OIL WELL: Most oil pumping units (OPUs) have been using manual control in the oilfield...read more and download here
[2490]. ASSESSMENT OF PROXIMATE MINERAL, PHYTOCHEMICALS AND VITAMIN CONTENTS OF BANANA SUBJECTED TO RIPENING BY ARTIFICIAL METHODS: Foods frequently eaten supply both micro and macro nutrients to humans which are important in the total assessment of public health status of an individual. The analysis of these foods will provide evidence on their nutritional values, guide to appropriate choice of meal and encourage intake of varieties of food with better qualities during illness while preventing diet-associated disorders...read more and download full material
[2491]. ASSESSMENT OF SOIL RADIONUCLIDE LEVEL IN ILORIN, KWARA STATE: A study of soil radionuclide from Ilorin, Nigeria, has been carried out and it was analyzed by g-ray spectroscopy to determine the 226Ra and 228Ra concentrations. The activity concentration values range from 0.81 ± 0.08 to 7.4 ± 2.2 Bq/l for 226Ra and from 1.8 ± 0.3 to 5.6 ± 2.6 Bq/l for 228Ra...read more and download full material
[2492]DESIGN AND CONSTRUCTION OF A DIGITAL WEIGHT BALANCE: This paper presents the design of an efficient, accurate and inexpensive microcontroller based weighing scale which can be used in all weight measuring operations...read more and download here
[2493]DESIGN AND CONSTRUCTION OF AN AUTOMATIC RAIN SENSING WINDOW: This work is on an automatic rain water sensing window...read more and download here
[2494]DESIGN AND FABRICATION OF A MOBILE WATER SPRINKLER : Costs of taking a water sprinkler to a remote area are high...read more and download here
[2495]DESIGN AND FABRICATION OF AN ELECTRONIC IGNITION SYSTEM: The need for higher mileage, reduced emissions and greater reliability has led to the development of the electronic ignition systems...read more and download here
[2496]DESIGN AND INSTALLATION OF AN INTERCOM USING PABX SYSTEM: Electronic inter communication is the process of exchanging information between individuals over relatively long distance by the use of electronic system connected together by communication cables or the instrument cable or satellite links...read more and download here
[2497]E-WASTE: Access to Information and Communication Technology (ICT) is pivotal of a country’s economic and social development and is currently improving throughout the developed and developing world...read more and download here
[2498]INTEGRATED CIRCUIT: This work is on an integrated circuit which is described as a set of electronic circuits on one small flat piece of semiconductor material that is normally silicon...read more and download here
[2499]PHOTORESISTORS: This work is on a phototransistor which is a resistor whose resistance changes in response to light. A photoresistor resistance decreases with the strength of the light...read more and download here
[2500]PRINCIPLE OF TRACKING SENSOR: The Global Positioning System (GPS) is known as a monitoring sensor that uses satellites orbiting in space to help users on the ground to precisely determine their location almost anywhere in the world...read more and download here
[2501]PROTOTYPING OF A GAS SENSOR CONTROLLED VALVE TO PREVENT GAS LEAKAGE IN HOMES AND INDUSTRIES: The use of gas has replaces kerosene because of affordable price...read more and download here
[2502]SMART FIRE DETECTION AND ALARM SYSTEM USING GSM MODULE: This work is on “smart fire detection and alarm system using GSM module”. Fire accident as an unplanned and undesirable event that can cause by many factors which can brings damages to social wealth and human life needs to be prevented at all cost...read more and download here
[2503]SOLAR POWERED BATTERY CHARGER WITH REVERSE CURRENT PROTECTION: This work is on solar mobile charger with reverse current protection. It is designed to meet up with the higher demand of power supply needed to keep our cell phone battery charged and secured...read more and download here
[2504] WASTE TO ENERGY: Proper treatment of Municipal Solid Waste (MSW) is one of major challenges achieving adequate sustainability especially in the urban environment...read more and download here
[2505] ANALYSIS OF EKET 132/33KV TRANSMISSION STATION LOADING PROFILES POWER UTILIZATION PROSPECTS: Efficient electric power transmission is a major concern in Nigeria. Electric power transmission is the link between power generation and power distribution network...read more and download here
[2506] DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED AUTOMATIC SOLAR STREET LIGHT CONTROLLER: This paper aims at designing and executing the advanced development in embedded systems for energy saving of street lights...read more and download here
[2507]DESIGN AND CONSTRUCTION OF A SOUND POWERED LECTERN/PODIUM: Sound powered lectern is a handcrafted lectern constructed by using the finest solid hardwoods and artificial leather...read more and download here
[2508]DESIGN AND CONSTRUCTION OF AN ELECTRIC MOBILE LANTERN: Since the invention of electricity by Michael faraday, Man has been so used to electricity that he cannot do without it. The absence of electricity causes a lot of sadness in our daily lives...read more and download here
[2509]DESIGN AND CONSTRUCTION OF AN ELECTRONICS LECTERN/PODIUM: This work is on a mobile electronic lectern/podium which is an integration of PC and audio visual equipments, which makes a classroom and presentation hall interactive...read more and download here
[2510]SEMINAR ON A HEARING AID: This seminar work is on a hearing aid which is described as a device designed to improve hearing...read more and download here
[2511]THE DESIGN AND CONSTRUCTION OF AC (WINDOW UNIT) CONTAINING HEAT PUMP: This project study is applicable to the field of heating and air conditioning...read more and download here
[2512] AUTOMATIC WASHROOM LIGHT SWITCHING SYSTEM USING REED SWITCH: We turn on the lights in our washroom when we enter it and turn them off when we leave...read more and download here
[2513]COMPUTER BASED EXAMINATION-CBT: (Using linear congruencial method to generate questions): Taking advantage of computer technology in education will help the semester exams in every school become simpler during the process of the exam and scoring, School use manual exam system...read more and download here
[2514]DESIGN AND CONSTRUCT AN AUTOMATIC WATER LEVELER FOR A 1.5HP PUMPING MACHINE: Water scarcity is one of the major problems facing many cities of the world and wastage during transmission has been identified as a major culprit; this is one of the motivations for this study, to deploy computing techniques in creating a barrier to wastage in order to not only provide more financial gains and energy saving, but also help the environment and water cycle which in turn ensures that we save water for future...read more and download here
[2515]DESIGN AND CONSTRUCTION OF A 220V LIVE WIRE SCANNER: This project work is on 220v live wire scanner. When you hold the sensor (metallic conductor or copper wire) close to the live wire, electric field from mains activates the circuit...read more and download here
[2516]DESIGN AND CONSTRUCTION OF A BLUETOOTH ANDROID BASED OSCILLOSCOPE USING PIC33FJ16GS504: This work presents the proposed design and implementation of a light-weight, low power, portable, low-cost, single channel oscilloscope consisting of a hardware device and a software application...read more and download here
[2517] DESIGN AND CONSTRUCTION OF A STAND ALONE SOLAR SYSTEM: Stand-Alone PV System (SAPVS) supply an alternative means of electrification in urban landscapes that are not connected to power utility grid and that have a high flow of visitors....read more and download here
[2518]DESIGN AND CONSTRUCTION OF AN AUTOMATIC SOLAR WATER PUMP CONTROLLER USING ULTRASONIC SENSOR AND ATMEGA328P: This project is titled the design and construction of an automatic solar water level controller system...read more and download here
[2519] DESIGN AND IMPLEMENTATION OF AN AUTOMATIC FIRE DETECTION AND ALARM SYSTEM USING VOICE PROMPT: This work is on “automatic fire detection and alarm system using voice prompt”. Fire accident as an unplanned and undesirable event that can cause by many factors which can brings damages to social wealth and human life needs to be prevented at all cost...read more and download here
[2520]DESIGN AND CONSTRUCTION OF A 500VA SOLAR INVERTER WITH 12v/200AHr BATTERY: This work is on design and construction of a 500VA solar inverter with 12v/200ahr battery...read more and download here
[2521]DESIGN AND CONSTRUCTION OF A 500VA SOLAR INVERTER WITH 12v/200AHr BATTERY: This work is on design and construction of a 500VA solar inverter with 12v/200ahr battery...read more and download here
[2522]. DESIGN AND CONSTRUCTION OF A DIGITAL SOIL MOISTURE SENSOR: This work is on a digital soil moisture sensor. Soil moisture sensors measure the volumetric water content in soil. Since the direct gravimetric measurement of free soil moisture requires removing, drying, and weighing of a sample, soil moisture sensors measure the volumetric water content indirectly by using some other property of the soil, such as electrical resistance, dielectric constant, or interaction with neutrons, as a proxy for the moisture content...read more and download full material
[2523]. DESIGN AND CONSTRUCTION OF A DOT MATRIX INFORMATION DISPLAY SYSTEM (To display “welcome to electrical electronic engineering department”): This work is on design, construction and working of a Dot Matrix Information Display. The project covered a fairly comprehensive study of a Dot Matrix Information Display. Digital instruments, signals, and related numbers and codes were discussed...read more and download full material
[2524]DESIGN AND CONSTRUCTION OF A BJT TRAINER: In study center, students often used a trainer while experimenting in the laboratory; it becomes a dependable kits for user...read more and download here
[2525]. DESIGN AND CONSTRUCTION OF A DARK ACTIVATED SWITCH: This work is aimed at activating a switch or AC lamp at sunset and deactivate it at sunrise.This Dark activated Switch can trigger a relay to operate an AC lamp at Sunset. The lamp remains on till morning and then turns off...read more and download full material
[2526] DESIGN AND CONSTRUCTION OF AN RFID AND PASSWORD BASED AUTOMATIC DOOR ACCESS CONTROL SYSTEM: Security system solutions for strategic facilities are critical to prevent the intrusion of unauthorized persons, however there are many types of automatic access control systems which are expensive and complicated to use...read more and download here
[2527] DESIGN AND CONSTRUCTION OF HYDRO POWER GENERATION: Energy is the key stimulus for rapid industrial development of all sectors of the economy...read more and download here
[2528]. DESIGN AND CONTRUCTION OF AN AUTOMATIC CHANGEOVER WITH ALARM SYSTEM: This paper reviewed the methods of implementing change over system and proposed a better and cost effective approach to realizing the same...read more and download here
[2529] DESIGN AND IMPLEMENTATION OF A 4 KVA TRANSFORMER TRAINER: The transformer trainer is an electrical instrument design in the electric power and machine laboratory used extensively to demonstrate the operation and performance of the single phase transformer...read more and download here
[2530] FEEDBACK OF A CONTROL SYSTEM: Control theory deals with the control of dynamical systems in engineered processes and machines. The objective is to develop a control model for controlling such systems using a control action in an optimum manner without delay or overshoot and ensuring control stability...read more and download here
[2531] NANOTECHNOLOGY IN ENGINEERING: Nanotechnology is helping to considerably improve, even revolutionize, many technology and industry sectors: information technology, energy, environmental science, medicine, homeland security, food safety, and transportation, among many others...read more and download here
[2532]SIMULATION OF WIND TURBINE POWER GENERATOR: IMPACT OF WIND TURBINES IN THE NIGERIAN GRID SYSTEM: This study is on the wind turbine power generator and its impact on Nigeria grid system...read more and download here
[2533] SMART FIRE DETECTION AND ALARM SYSTEM USING GSM MODULE: This work is on “smart fire detection and alarm system using GSM module”...read more and download here
[2534] SOLAR RADIATION FORECASTING: In recent decades, the integration of solar energy sources has gradually become the main challenge for global energy consumption...read more and download here
[2535] SOLAR INVERTER: This work is on a solar inverter system. Solar inverter converts the variable direct current (DC) output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be fed into a commercial electrical grid or used by a local, off-grid electrical network...read more and download here
[2536]COMMUNICATION PROTOCOL: In the world of technology, there are vast numbers of users' communicating with different devices in different languages...read more and download here
[2537] CONSTRUCTION OF SOLAR POWERED SECURITY LIGHTING SYSTEM WITH LDR: This project work is titled design and construction a solar security Light Control system. Security lighting is any electrical lighting that is fixed in the house or road for the illumination of such road...read more and download here
2538]. DESIGN AND IMPLEMENTATION OF VOICE RECOGNITION SYSTEM: This study is on design and implementation a voice recognition system that would identify different users based on previously stored voice samples. Each user inputs audio samples with a keyword of his or her choice. This input was gathered but successful processing to extract meaningful spectral coefficients was not achieved ...read and download
[2539] DESIGN AND CONSTRUCTION OF A DIGITAL REAL TIME CLOCK: Digital clock is a type of clock that displays the time digitally (i.e. in numerals), as opposed to an analog clock, where the time is indicated by the positions of rotating hands...read more and download here
[2540]DESIGN AND CONSTRUCTION OF A DIGITAL REAL TIME CLOCK: Digital clock is a type of clock that displays the time digitally (i.e. in numerals), as opposed to an analog clock, where the time is indicated by the positions of rotating hands...read more and download here
[2541] DESIGN AND CONSTRUCTION OF A MINI MP3 PLAYER: The MP3 player has become a major and venue for listening to music on daily basis...read more and download here
[2542] FEEDBACK OF A CONTROL SYSTEM: Control theory deals with the control of dynamical systems in engineered processes and machines...read more and download here
[2543] IMPROVEMENT ON A DESIGN, CONSTRUCTION AND TESTING OF RICE PADDY PRE-CLEANING MACHINE: A portable cereal cleaning machine was developed to use forced air from a rotary fan and reciprocating sieve driven by an eccentric shaft for separation of grain from grain-impurity mixture...read more and download here
[2544]DESIGN AND CONSTRUCTION OF WIND TURBINE USED FOR DRIVING THE PROPELLER SHAFT OF MARINE VESSEL: Wind power has been a valuable resource for centuries, and in recent years this resource has become even more useful as a source for electrical power and its application has moved to ship driving...read more and download here
[2545]A SEMINAR ON AUTOMATIC CHANGEOVER SWITCH WITH PHASE MONITORING DEVICE: This project work is on changeover switch with monitoring device...read more and download here
[2546]AUTOMATED ELEVATOR WITH OVERLOAD ALERT: This work is on design and construction of an automated elevator for smart application...read more and download here
[2547]DESIGN AND CONSTRUCTION A 220V AUTOMATIC VOLTAGE STABILIZER: This project is titled the design and construction of a 220V Automatic Voltage Stabilizer...read more and download here
[2548]. DESIGN AND CONSTRUCTION OF A FINGER PRINT DOOR LOCK USING ARDUINO UNO BOARD: Authentication plays a very critical role in security-related applications like e-commerce. There are a number of methods and techniques for accomplishing this key process. In this regard, biometrics is gaining increasing attention these days...read more and download full material
[2549]. DESIGN AND CONSTRUCTION OF A FIRE (SMOKE) ALARM SYSTEM USING MQ SENSOR: This project is titled design and construction of an automatic fire alarm. Fire alarm detect the presence of smoke during fire accident. An automatic fire alarm system is designed to detect the unwanted presence of fire by monitoring environmental changes associated with combustion...read more and download full material
[2550]DESIGN AND CONSTRUCTION OF A 9V RECHARGEABLE STANDING FAN: Countries like Nigeria are plagued with erratic power supply that has lingered on for decades...read more and download here
[2551] DESIGN AND CONSTRUCTION OF A SOLAR POWERED AUTOMATIC HAND-DRYER: There are many diseases which are contagious like monkey pox and Ebola virus and their major mode of transmitting these diseases is through contact with an infected person especially by touching such persons; hence, washing/sanitizing of hands has become a standard preventive practice over the years...read more and download here
[2552] DESIGN AND CONSTRUCTION OF AN ELECTRIC BICYCLE: The main aim of this review paper is to present the idea of harnessing the various energy and use it in today’s existence of human life ...read more and download here
[2553] DESIGN AND CONSTRUCTION OF A SOLAR POWERED AUTOMATIC HAND-DRYER: There are many diseases which are contagious like monkey pox and Ebola virus and their major mode of transmitting these diseases is through contact with an infected person especially by touching such persons; hence, washing/sanitizing of hands has become a standard preventive practice over the years...read more and download here
[2554]DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED SURGE PROTECTION SYSTEM: Power surges happen whenever the wiring in your home or office experiences brief jolts of high electrical voltage. Power surges can be minor or severe...read more and download here
[2555]DESIGN AND CONSTRUCTION OF A PROXIMITY SENSOR: Proximity sensor detects the presence of nearby objects without any physical contact...read more and download here
[2556]DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED INFRARED OBJECT COUNTER: As automation is the next leading step in changing the traditional techniques, the means of making these changes possible is currently in trend...read more and download here
[2557]. INFLUENCE OF FACEBOOK IN AWARENESS CREATION ON DOMESTIC VIOLENCE (A STUDY OF PORT HARCOURT): The 21st century social media such as facebook has been described as a veritable tool to campaign and speak for the female gender. This study seeks to find out how facebook is used to eradicate domestic violence in Nigeria...read more and download full material
[2558]PREFORMANCE EVALUATION AND THERMOECONOMIC ANALYSIS OF A GAS TURBINE POWER PLANT: In this study, thermo economic (thermo economic) analysis and performance evaluation of selected gas turbine power plants in Nigeria were carried out...read more and download here
[2559]SYNTHESIS AND ANTIMICROBIAL PROPERTIES OF PALLADIUM CHLORIDE COMPLEXES OF RUTIN: Pd(II) complexes of rutin were synthesized and characterized by elemental analysis, UV-Vis, FTIR, and NMR spectroscopy...read more and download here
[2560]DESIGN AND CONSTRUCTION OF A HIGH (<40db) VHF – UHF RECEIVING ANTENNA BOOSTER: An antenna is a specialized transducer that converts radio-frequency (RF) fields into alternating current (AC) or vice-versa...read more and download here
[2561]DESIGN AND CONSTRUCTION OF A BJT TRAINER: In study center, students often used a trainer while experimenting in the laboratory; it becomes a dependable kits for user...read more and download here
[2562]DESIGN AND CONSTRUCTION OF A FIRE FIGHTING ROBOT: Fire-fighting is an important but dangerous occupation...read more and download here
[2563]. LEXICO SEMANTICS ANALYSIS OF THE SERMONS OF ANGELA ASHING: This study analyses the lexico semantics in the context of Christian sermons using the sermons of Rev. Angela Ashing as a case study. The aim was to examine the lexical characteristics of language in context to establish whether or not the character of English lexis is determined by linguistic context or co-text...read more and download full material
[2564] DESIGN AND CONSTRUCTION OF RADIO FREQUENCY (RF) REMOTE LIGHT CONTROLLER: This project work deals on the design and construction of an Rf based remote control for an electronic/electrical device say electric lamp with the aim of switching on/off of the lamp at discretion and from a distance...read more and download here
[2565] DESIGN AND CONTRUCTION OF AN AUTOMATIC CHANGEOVER WITH ALARM SYSTEM: This paper reviewed the methods of implementing change over system and proposed a better and cost effective approach to realizing the same...read more and download here
[2566] DESIGN AND FABRICATION OF A MOBILE WATER SPRINKLER IRRIGATION SYSTEM: Costs of taking a water sprinkler to a remote area are high...read more and download here
[2567] DESIGN AND FABRICATION OF A REMOTE CONTROL MOTOR CAR: design and fabrication of a remote control motor car...read more and download here
[2568]DETERMINATION OF ASSEMBLED SOLAR PANEL: Sunlight is a form of radiant energy that travels to the earth as electromagnetic waves...read more and download here
[2569]LIGHTNING STRIKE ON MEDIUM VOLTAGE DISTRIBUTION AND HIGH VOLTAGE TRANSMISSION LINE IN SIERRA LEONE USING PSCAD/EMTDC: The continuity of supply in order to fulfil the demand of consumers is of great concern and has become need of an hour...read more and download here
[2570]MODELING OF AUTOMATIC BREAK CONTROL SYSTEM USING FUZZY LOGIC: Traffic congestion is a worldwide problem...read more and download here
[2571] DESIGN AND CONSTRUCTION OF AN IMPROVED WOOD STOVE: The design and construction of an improved wood stove is undertaken in this work...read more and download here
[2572]. MODIFICATION, DESIGN AND CONSTRUCT A LABORATORY SCALE FATIQUE TESTING MACHINE: This work is on modification, design and fabrication of a fatigue testing machine. Many engineering machines and mechanical components are subjected to fluctuating stresses, taking place at relatively high frequencies and under these conditions failure is found to occur...read more and download full material
[2573]. LIFE CYCLE OF ELECTRONIC SYSTEM: Obsolescence of electronic parts is a major contributor to the life cycle cost of long- field life systems such as avionics...read more and download full material
[2574]. DESIGN AND CONSTRUCTION A LITHIUM BATTERY CHARGER: This work is on a lithium battery charger which is designed to charge lithium batteries and other portable devices. This charger gives constant current and constant voltage for charging battery and also the voltage range and current value can be changed depending on the voltage of the battery under charge...read more and download full material
[2575]. MODIFICATION OF A MANUALLY OPERATED ALUMINUM CAN CRUSHER: The main aim of this project is to fabricate a modified Can Crusher machine to reduce the scrap volume and use the Cans so that carrying them to the recycle site becomes easy. Now-a- days, a large number of cans are used in hotels, canteens etc...read more and download full material
[2576]. MICROBIAL CONTAMINATION OF YOGHURT: An assessment of the microbial contamination of selected yoghurt sold in Onitsha Market was determined in this study using standard microbiological procedures. The physical parameters of the brands at time of purchase were also determined...read more and download full material
[2577]. MICROBIOLOGICAL ANALYSIS OF SMOOTHIES: Various kinds of fruit juices sold by the street vendors are widely consumed in BELL University. These street vended fruit juices are usually high in microbial loads. So, the present study was undertaken to assess the microbiological load, possible risk factors and identity of freshly squeezed juices and their safety for human consumption in terms of pathogens...read more and download full material
[2578]. CONSTRUCTION OF MICROCONTROLLER BASE WATER LEVEL INDICATOR WITH AUTOMATIC PUMP CONTROLLER: This project presents the concept of a control system into an automatic water pump controller. One of the motivations for this project is the need to bring a solution to the problem of water shortage in various places eliminating the major culprit, waste of water during pumping and dispensing into overhead tanks...read more and download full material
[2579]. DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED CAPACITANCE METER: Capacitors are one of the most common passive electrical components that are extensively used in all kinds of electronic circuits. In this project, we will discuss a technique of building a digital capacitance meter using a PIC microcontroller...read more and download full material
[2580]. DESIGN AND CONSTRUCTION OF A MICRO CONTROLLER BASED STARTER FOR SINGLE PHASE INDUCTION MOTOR WITH DELAY: It is well understood that induction motors draw higher currents during their starting operations than is the case under full load running conditions. Since the early days of induction motor availability, starting methods other than Direct-on-Line have been used, and in some cases mandated by Utilities, to reduce the effect of these high starting currents on the electrical distribution network...read more and download full material
[2581]. MONITORING AND CONTROL OF LOW VOLTAGE NETWORK: This work describes the low-voltage distribution network monitoring and control system developed for electricity distribution company which investigate low-voltage distribution network performances as well as to identify and study energy losses in low-voltage distribution networks...read more and download full material
[2582]DESIGN AND CONSTRUCTION OF AN ELECTRONIC DISPLAY BOARD: This report is aimed at explaining the Design and Construction of an electronic display board. It enumerate why we need electronic display board which is primarily for passage of information across the staff, students and public. It also includes the aim and objectives, advantages and disadvantages with a well narrated literature review and timeline that relates to digital display and its current trends in digital world...read more and download here
[2583]. NUETRON RADIATION AND ITS IMPACT IN MEDICAL PHYSICS: Neutron radiation is a form of ionizing radiation that presents as free neutrons. Typical phenomena are nuclear fission or nuclear fusion causing the release of free neutrons, which then react with nuclei of other atoms to form new isotopes—which, in turn, may trigger further neutron radiation...read more and download full material
[2584]DESIGN AND CONSTRUCTION OF A SINGLE STAGE AMPLIFIER: An amplifier is an electronic device that amplifies the weak signal or increases the strength of a weak signal...read more and download here
[2585] DESIGN AND CONSTRUCTION OF AN AC CONTINUITY TESTER: This work is on continuity tester designed for frontline test and repair jobs...read more and download here
[2586]. PARASITIC AND FECAL CONTAMINATION OF SOME DOMESTIC WATER SOURCES: Availability of good water source is essential to every community in other to allay the risk of water- borne infection and diseases. In this study, the isolation of parasites and rate of parasitic contamination from different water sources were evaluated in Akure, Nigeria...read more and download full material
[2587]. PHYTOCHEMICAL AND ANTIMALARIAL PROPERTIES OF MANGIFERA INDICA: The menace of current cases of parasite resistance to anti-malarial drugs, non- availability and accessibility, and the high costs of pharmaceutical products contribute to the high rate of medicinal plants consumption in the treatment of malaria in Nigeria...read more and download full material
[2588]DESIGN AND CONSTRUCTION OF A RECHARGEABLE SOLDERING IRON: This work is on a rechargeable soldering iron. A rechargeable soldering iron joins two metal work pieces by means of a third metal (solder) at a relatively low temperature, which is above the melting point of the solder but below the melting point of either of the materials being joined ...read more and download here
[2589]. POWER LOSS MINIMIZATION FOR 11KV RADIAL DISTRIBUTION SYSTEM FOR IMPROVED POWER QUALITY. (USING RUMUOLA 11KV STATION AS CASE STUDY): The Distribution System can be seen as the networking line that interfaces between the large power generators and transmission lines on one hand and the electricity consumers on the other...read more and download full material
[2590]. PRODUCTION OF BLACK AND BROWN POLISH BROWN POLISH: This project is aimed at producing black and brown polish of good quality. For clearity, polish is a substance rubbed on the surface of materials to make them smooth and shiny. Polish has being of immense importance in protecting leather surfaces and enhancing their beauty...read more and download full material
[2591]DESIGN AND CONSTRUCTION OF A NON-CONTACT INFRARED THERMOMETER WITH ALARM: The project is titled “The design and construction of a non-contact thermometer using infrared and with alarm”...read more and download here
[2592]CONSTRUCTION OF THE SPIN DRYER: This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing...read more and download here
[2593]DATA BASE SIMULATION OF A HYBRID WIND AND SOLAR HARVESTING SYSTEM: Harvesting system of a hybrid wind and solar is developed for hybrid system with the aid of mathematical models for photovoltaic cell, wind turbine, and battery that are readily present in the literature...read more and download here
[2594]DESIGN AND CONSTRUCTION OF A 3KVA POWER INVERTER WITH 24V BATTERY: This project is titled the design and construction of a DC to AC inverter system...read more and download here
[2595]DESIGN AND CONSTRUCTION OF A MAINS AC SHORT CIRCUIT BREAKER:The circuit breaker is an absolutely essential device in the modern world, and one of the most important safety mechanisms in homes...read more and download here
[2596]. PROMOTIONAL MIX IN BANKING SYSTEM (UNION BANK PLC AS CASE STUDY): Marketing activities cannot said to be complete a effectives if the consumer did not get the message or where the message did not reach the target audience (market) an effective message needs to pass across the market so that consumer will be aware of the company’s product, where the company is what exactly the company produce and benefit to be derived from using the products...read more and download full material
[2597]. QUALITY ASSESSMENT AND SHELF LIFE OF SOYMILK PRODUCED FROM BLEND OF QUINOA (CHENOPODIUM QUINOA ) AND SOYBEAN (GLYCINE MAX) SEEDS: This work was to investigate the quality and shelf life of soymilk made with quinoa and soya beans seeds. This was carried out by isolating resident bacteria and carrying out their proximate analyses...read more and download full material
[2598]. REACTIVE POWER COMPENSATION IN HIGH VOLTAGE TRANSMISSION LINE: Transmission systems are becoming increasingly stressed because of growing demand and because of restrictions on building new lines. However, most high voltage transmission systems are operating below their thermal rating due to such constraints as stability limits...read more and download full material
[2599]. REACTIVE POWER COMPENSATION USING CAPACITOR BANKS (CASE OF THE PORT HARCOURT ELECTRICITY DISTRIBUTION COMPANY): Transmission systems are becoming increasingly stressed because of growing demand and because of restrictions on building new lines. However, most high voltage transmission systems are operating below their thermal rating due to such constraints as stability limits – reactive power...read more and download full material
[2600]CONSTRUCTION OF THE SPIN DRYER: This work is aimed at designing and fabricating a spin dryer which can be used in drying clothes after brewing...read more and download here
[2601]. REAL-TIME VEHICULAR SCENE MONITORING SYSTEM FOR THE RESCUE OF KIDNAPPED VICTIMS USING (RFID): In present time due to increase in number of kidnapping cases, parent always worry about their children.This paper proposes a SMS based solution to aid parent to track their children location in real time...read more and download full material
[2602]. REVIEW OF COMPUTER POWER BANK CHARGER: Computer Power Bank charger is comprised of a special battery in a special case with a special circuit to control power flow. They allow you to store electrical energy (deposit it in the bank) and then later use it to charge laptop via the laptop charger...read more and download full material
[2603]. SEQUENTIAL DEVICE CONTROL USING TV REMOTE CONTROL: This work is on sequential device control using TV remote control. This device lets the user to switch ON and switch OFF up to nine devices sequentially from your TV remote control...read more and download full material
[2604]DESIGN AND CONSTRUCTION OF 4-WAY CHANNEL AUDIO MIXER WITH PUBLIC ADDRESS SYSTEM: This work is on a four channel audio mixer with public addressing system...read more and download here
[2605] CONSTRUCTION OF 3KVA, 12V FERRITE BASE INVERTER: This project is titled the design and construction of a DC to AC inverter system...read more and download here
[2606]. SMART CCTV SURVEILLANCE AND SECURITY SYSTEMS FOR COMPANIES AND HOUSEHOLDS:The implementation and use of surveillance (Closed Circuit Television technology) in societies across the globe has become a standard and reliable way of securing out environment...read more and download full material
[2607] DESIGN OF A 4TH QUADRAT CHOPPER FOR DC-DC MOTOR: The speed control of separately excited DC motor can be done by using choppers from 0 to rated speed ...read more and download here
[2608] PERFORMANCE EVALUATION OF JAVA, PYTHON, JAVASCRIPT, C AND C++: Due to the rapid advancement of technology, there are many software development industries which led to the development of many programming languages to the extent that nowadays there are thousands of programming languages available, only a few of them can be applied comparatively widely...read more and download here
[2609]. STUDY ON THE CAUSES OF SIGNAL STRENGHT VARIATION OF MOBILE PHONE NETWORK (CASE STUDY OF UNIVERSITY OF MAIDUGURI): GSM Network performance and service quality evaluation are essential steps for mobile operators as the income generated and customer satisfaction is directly linked to network performance and quality...read more and download full material
[2610]. SURVEILLANCE CAMERA CONTROL SYSTEM: The proposed work is Smart CCTV camera surveillance system. CCTV camera can be wirelessly monitored and control with the help of the RF module. In the monitoring site, the system captures the video through the embedded multitask operating system...read more and download full material
[2611]. THE DESIGN AND CONSTRUCTION OF A 2000W POWER AMPLIFIER: This report is aimed at explaining the Design and Construction of an electronic sign pattern display which is also known as electronic display board. It enumerate why we need electronic sign pattern display which is primarily for passage of information across the staff, students and public...read more and download full material
[2612]DESIGN OF 2KV PURE SINE WAVE INVERTER WITH BATTERY FEED INDICATION: This project is titled the design and construction of a 2Kva pure sine wave inverter system with battery feed indicator...read more and download here
[2613]. THE CONTRIBUTION OF EMISSION OF DOMESTIC FOSSIL FUEL COMBUSTION ON GLOBAL CLIMATE CHANGE: Mitigating climate change is one of the biggest challenges that confront mankind in the present millennium. The problem has continued to dominate public debates in terms of its origin, sources, potential impacts and possibly adaptation strategies...read more and download full material
[2614]. THE DESIGN AND CONSTRUCTION A 5KVA AUTOMATIC VOLTAGE REGULATOR USING MICROCONTROLLER AND DISPLAY:Voltage regulators are used for many appliances in homes, offices and industries. The mains supply suffers from large voltage drops due to losses on the distribution lines en route...read more and download full material
[2615]. THE DESIGN AND CONSTRUCTION A 5KVA AUTOMATIC VOLTAGE STABILIZER WITH SURGE ARRESTOR: This work is on a 5kva Automatic Voltage Stabilizer. It is designed to meet up with the AC voltage safety, stability and accuracy demand in industries and in homes. Voltage stabilizers are useful in devices such as computer Power supplies, alternators and central power station generator plants, voltage stabilizer control the output of the plant...read more and download full material
[2616]. THE DESIGN AND CONSTRUCTION OF A 2000W POWER AMPLIFIER: This work is titled the design and construction of a 2000Watt Amplifier. An audio Amplifier is a device for increasing the audio power of a signal by use of an external energy source...read more and download full material
[2617]. THE INFLUENCE OF ORGANIC MATTER ON ACOUSTICAL PROPERTIES OF SOIL: It has been discovered long time ago that organic matter influences physical and mechanical properties of soils. Samples collected from a long-term agriculture experiment involving different treatments, have been subjected to differential thermal analysis (DTA) to deduce the organic matter content and its composition. Water release characteristics and soil strength have been measured with the suction plate method and indirect tension method, respectively...read more and download full material
[2618]. THE ONLINE PRESENCE AND CONSUMER BUYING BEHAVIOR (A CASE STUDY OF THREE SELECTED ONLINE STORES IN OWERRI, IMO STATE – NIGERIA): Consumers are the kings of markets. No business enterprise can operate without the presence of the consumer, and with the advancement of technology, consumers tend to make countless decisions in purchasing with the use of online means – online shops...read more and download full material
[2619]. THE ROLE MOTIVATION IN IMPROVING THE ORGANIZATION EFFECTIVENESS ( A CASE STUDY OF UBA BANK ILORIN): This project is divided into five chapter, chapter one consist of background of the study , introduction, statement of the problem , with productivity problem , objective of the study scope and limitation of the study , Definition of key term and plan of the study...read more and download full material
[2620] DESIGN AND CONSTRUCTION OF AN AUTOMATIC POWER RESUMPTION ALARM: Power restoration is a period of time when the electricity supply to a particular building or area is restored, for example because of replacement or servicing damage to the cables or any other reason...read more and download here
[2621] DESIGN AND CONSTRUCTION OF AN INDUCTION COIL: The write-up details the design and construction of an Induction coil which was capable of producing a high voltage in the secondary winding so as to produce a spark between the adjustable terminals of the secondary winding...read more and download here
[2622] DESIGN AND CONSTRUCTION OF AUTOMATIC FLUID PUMPING SYSTEM USING IC555: According to C.M. Schumacher (2014), fluid is a substance that continually deforms (flows) under an applied shear stress, or external force...read more and download here
[2623] DESIGN AND CONSTRUCTION OF GAS LEAKAGE DETECTOR WITH SMS ALERTS: This work is on a gas detection system. Gas detector is a device that detects the presence of gases in an area, often as part of a safety system...read more and download here
[2624]DESIGN AND CONSTRUCTION OF MOTION ACTIVATED AC SWITCH: Motion detector detects moving objects, particularly people. A motion detector is often integrated as a component of a system that automatically performs a task or alerts a user of motion in an area...read more and download here
[2625] DESIGN AND IMPLEMENTATION OF A DC-DC BOOST CONVERTER USING PID CONTROLLER FED TO A DC MOTOR: DC-DC converters are electronic devices used to change DC electrical power efficiently from one voltage level to another...read more and download here
[2626] DESIGN AND CONSTRUCTION OF A WIRELESS CELLPHONE DETECTOR AND JAMMER: This research have been done to restrict the use of cellphones in restricted areas and to increase security...read more and download here
[2627]. MOTION OF THE PLANET (EARTH): This study is on the motion of the planet. A planet is described as a celestial body that is in orbit around the Sun, has sufficient mass for its self-gravity to overcome rigid body forces so that it assumes a hydrostatic equilibrium (nearly round) shape, and has cleared the neighbourhood around its orbit...read more and download full material
[2628] DESIGN AND CONSTRUCTION OF A BLUETOOTH ANDROID BASED OSCILLOSCOPE USING WIRELESS EARPIECE MODULE: Oscilloscopes nowadays we use today are CRO or DSO which is little bit difficult to use as well as not portable and consumes more power...read more and download here
[2629]DESIGN AND CONSTRUCTION OF A 3KVA PURE SINE WAVE INVERTER: This project is titled the design and construction of a 2Kva pure sine wave inverter system with battery feed indicator...read more and download here
[2630] A SIMPLE THERMOELECTRIC GENERATOR USING THE TEG1848-27145 MODULE: Increasing the production of energy in line with industry development, transportation, and life quality improvement is an interesting topic needs to be addressed...read more and download here
[2631]CONSTRUCTION OF AN ADJUSTABLE ELECTRONIC FLASHER: This project (Construction of an adjustable electronic flasher) was constructed using available materials...read more and download here
[2632]. TEACHERS DEVELOPMENT PROGRAMME AND SCHOOL EFFECTIVENESS IN THE SECONDARY SCHOOL OF OYE EKITI: The objective of this study is to assess the policy implementation on Teachers’ Development for achieving school effectiveness in Nigeria. A descriptive survey research design was adopted for the study...read more and download full material
[2633]DESIGN AND CONSTRUCTION OF A 12 VOLTS BATTERY CHARGER: A battery charger is an electrical device employed for charging batteries...read more and download here
[2634]. THE EFFECT OF RADIATION ON HUMAN AND PLANT: Everyone on the planet is exposed to a certain amount of radiation as they go about their daily lives. Radioactive material is found naturally in the air, soil, water, rocks, and vegetation. The greatest source of natural radiation for most people is radon...read more and download full material
[2635]DESIGN AND CONSTRUCTION OF AN ELECTRONIC IGNITION SYSTEM(TRANSISTORIZED): This work is a transistorized electronic ignition system. An electrical system for use with an ignition system of the type including an ignition coil and breaker points...read more and download here
[2636]DESIGN AND CONSTRUCTION OF AN INTELLIGENT CHANGE OVER SWITCH FOR A THREE PHASE SUPPLY: This work is on an intelligent change over for a three phase supply. The system uses phase sensors to monitor the voltage in each phase...read more and download here
[2637]DESIGN AND CONSTRUCTION OF AN INTELLIGENT VOICE CONTROLLED SWITCH USING ANDROID: Automation is playing an important role in our daily lives most especially in the 21st century...read more and download here
[2638]. DESIGN AND CONSTRUCTION OF A HEARING AID USING BLUETOOTH: This work is on a Bluetooth based hearing aid. A hearing aid is a device designed to improve hearing. Hearing aids are classified as medical devices in most countries, and regulated by the respective regulations...read more and download full material
[2639] DESIGN AND CONSTRUCTION OF AN RF REMOTE CONTROL FOR FAN SPEED WITH A DIGITAL DISPLAY: The work is on design and construction of a remote controlled fan regulator...read more and download here
[2640] DESIGN AND CONSTRUCTION OF REMOTE SENSING DEVICE (SMART SWITCH) FOR HOME USE: This device is design to monitor and control electrical devices remotely using TV remote control. The infrared sensor provides the communication mechanism between the user and the system...read more and download here
[2641] DESIGN AND CONSTRUCTION OF SOLAR CHARGE CONTROLLER OF 24V/60A: Solar charge controller limits the rate at which electric current is added to or drawn from solar panel to electric batteries...read more and download here
[2642]. ENVIRONMENTAL EFFECT OF SOLAR ENERGY PERFORMANCE IN THE NIGER DELTA REGION A CASE OF STUDY OZORO OR ISOKO: This study presents the effect of temperature, relative humidity, rainfall and sunshine on solar energy in Ozoro. The study analyses a direct relationship between solar radiation and temperature, and an inverse relationship with rainfall and relative humidity and also sunshine...read more and download full material
[2643]. COMPUTATIONAL VERIFICATION METHODS FOR AUTOMOTIVE SAFETY SYSTEMS ON PERFORMANCE EVALUATION OF AUTOMOTIVE ACTIVE SAFETY SYSTEMS: With the development of the national economy, the people's standard of living got corresponding improvement, cars has been one of the indispensable traffic tools in many families...read more and download full material
[2644]. CONSTRUCTION OF 3BULBS SOLAR KIT FOR LIGHTING SYSTEM AND USB: Renewable energy sources have great potential to give solutions to the longstanding energy problems being faced in Nigeria. Renewable energy sources can be an important part of Nigeria's plan to increase energy security, move towards green energy and address environmental concerns...read more and download full material
[2645]. DESIGN AND CONSTRUCTION OF A 5KVA UTILITY VOLTAGE CONDITIONER FOR CRITICAL LOAD PROTECTION: An automatic Voltage regulators are used for many appliances in homes, offices and industries. The mains supply suffers from large voltage drops due to losses on the distribution lines en route...read more and download full material
[2646] DESIGN AND CONSTRUCTION OF THYRISTOR BASED A/C MOTOR SPEED CONTROLLER: Electric AC motor works at fixed speeds and are ideally suited to applications where a constant output speed is required...read more and download here
[2647]. DESIGN AND CONSTRUCTION OF A 500KVA SOLAR INVERTER: This work is on design and construction of a 500KVA solar power system. This is a grid tie solar system that converts the variable direct current (DC) output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be fed into a commercial electrical grid or used by a local, or off-grid electrical network...read more and download full material
[2648] EFFECTS OF POWER FAILURE ON APPLIANCES: Electric power supply is the most important commodity for national development...read more and download here
[2649] DESIGN AND DEVELOPMENT OF HEART RATE VALVE USING FINGERTIP: This work is on a microcontroller based heart rate valve using fingertip. It is a low cost and portable method that is proposed and implemented to measure heartbeat using the microcontroller device with LCD output...read more and download her
[2650]. AUTOMATED POULTRY MACHINE THAT PACKAGES EGGS ACCORDING TO THIER WEIGHT: Many small and medium scale poultry owners do the process of weighing and packaging their egg manually. Small and Medium scale poultry production business owners who particularly produce egg has to do the weighing and packaging process manually...read more and download here
[2651]. DESIGN AND CONSTRUCTION OF AUTOMATIC ELECTRIC COOKER WITH TIMER: This project entails the design and construction of electric cooker with timer, the cooker is powered by electricity because it is cheap and readily available...read more and download here
[2652]. CONSTRUCTION OF A GAS LEAKAGE DETECTOR ALARM USING MICROCONTROLLER: LPG gas is commonly used in our home for cooking purpose. LPG is used in school and college canteens; also it is used in various industries. Accidents never happen with a prior intimation. There are chances of gas leakage due to some negligence...read more and download here
[2653]. DESIGN AND ANALYSIS OF THE SYNCHRONIZATION OF A 2 * 250KVA GENERATOR: In this study, an automatic synchronization unit has been developed for the parallel connection of synchronous generators. Two synchronous generators are connected in parallel automatically with the developed control unit. Synchronous generators are also connected in parallel with the line...read more and download here
[2654]. DESIGN AND CONSTRUCTION AN ELECTRIC MUFFLE FURNACE: This work is on an electric muffle furnace which is a furnace in which the subject material is isolated from the fuel and all of the products of combustion, including gases and flying ash. [C.A. Crowley, 1937] After the development of high-temperature heating elements and widespread electrification in developed countries, new muffle furnaces quickly moved to electric designs...read more and download here
[2655]. DESIGN AND CONSTRUCTION OF A 92.5Mhz FM TRANSMITTER: An FM transmitter is an electronic device which, with the aid of an antenna, produces radio waves. The transmitter itself generates a radio frequency alternating current, which is applied to the antenna. When excited by this alternating current, the antenna radiates radio waves...read more and download here
[2656]. DESIGN AND CONSTRUCTION OF A 220-110V STEP DOWN TRANSFORMER: This work is on 220vac to 110vac power supply using transformer, which served as a step down transformer whose secondary voltage is less than its primary voltage. It is designed to reduce the voltage (220v) from the primary winding to 110v in the secondary winding...read more and download here
[2657]. DESIGN AND CONSTRUCTION OF A DIGITAL HYDROMETER: Digital Hydrometer measures specific gravity of lead-acid battery fluid. The measurable range is optimized to the specific gravity of sulfuric lead-acid battery fluid. This digital hydrometer is the quickest and most efficient way to maintain and ensure optimally charged industrial storage battery banks...read more and download here
[2658]. DESIGN AND CONSTRUCTION OF AN ELECTRONICS NOTICE BOARD USING LED: This project work is on an electronic school’s notice board using LED which is an electronic display board used in displaying our school’s signboard to the public and strategic locations. The displays are seen mainly in many public and strategic places such as school’s junction, entrance gate, and exit gate...read more and download here
[2659]. DESIGN AND CONSTRUCTION OF AUTOMATIC ROOM LIGHT CONTROLLER WITH VISITORS COUNTER: This Project ―”Automatic Room Light Controller with Bidirectional Visitor Counter” is a reliable circuit that takes over the task of controlling the room lights as well us counting number of persons / visitors in the room very accurately...read more and download here
[2660]. DESIGN AND CONSTRUCTION OF GAS FIRED HEAT TREATMENT MUFFLE FURNACE: This work is on the design of a Gas fired heat-treatment muffle furnace using locally sourced materials. The design philosophy is to eliminate the use of heating elements requiring electric power which is poorly supplied in the country...read more and download here
[2661]. DESIGN AND CONSTRUCTION OF PVC FULL CONDUIT WIRING SYSTEM FOR SIX BEDROOM BUNGALOW: Electrical conduits are the infrastructure of electrical installations. Building technology is one of the construction stages of a house which is used longest - mostly for the entire life of the building. Those who want to install only the minimum equipment in the new building for cost reasons should plan ahead and include several conduits...read more and download here
[2662]. DESIGN AND CONSTRUCTION OF WIRELESS CCTV USING OTP: With the rapid increase in the proportion of single households, vulnerability to crime is emerging as a new social problem. Especially for single female families, the anxiety of stranger visitors is known as the biggest problem...read more and download here
[2663]. DESIGN AND COSTING OF A 1KW WIND TURBINE POWER SYSTEM IN PORT HARCOURT: Wind power has been a valuable resource for centuries, and in recent years this resource has become even more useful as a source for electrical power. It has many advantages over traditional fossil fuel power sources, releasing no greenhouse gasses during energy production and having very low impact on the local environment while doing so...read more and download here
[2664]. DESIGN AND CONSTRUCTION OF A DOOR ALARM SYSTEM: The door alarm system is an electronic device that can be used as a security device. It is an electronic watch dog, because when installed to a door, and somebody touches the door, it sounds an alarm...read more and download here
[2665]. DESIGN AND CONSTRUCTION OF A RAIN OPERATED WIPER: In the present automobiles the number of facilities is much higher. The driver has to concentrate on road while driving, and with increased traffic, things get frustrating. The features in the car like GPRS to trace the route, music system, air condition system etc may drive away the attention of the driver ...read more and download here
[2666]. DESIGN AND CONSTRUCTION OF A RECHARGEABLE WIRELESS PUBLIC ADDRESS SYSTEM: This work is on a wireless amplifier. It has become inevitable that there would be communication and due to the inherent limitation of the human voice, the public address system came to being...read more and download here
[2667]. DESIGN AND CONSTRUCTION OF A SOLAR STREET LIGHT WITH PROXIMITY SENSOR: This project work is titled design and construction a solar Street Light Control system with proximity sensor.A street lighting is any electrical lighting that is fixed in the road for the illumination of such...read more and download here
[2668]. DESIGN AND CONSTRUCTION OF A SPEED SENSOR: While driving on highways, motorists should not exceed the maximum speed limit permitted for their vehicle. However, accidents keep occurring due to speed violations since the drivers tend to ignore their speedometers...read more and download here
[2669]. DESIGN AND CONSTRUCTION OF AN ELECTRONIC BILLBOARDS: An electronics billboard advertisements are designed to catch a person's attention and create a memorable impression very quickly, leaving the reader thinking about the advertisement after they have driven past it. They have to be readable in a very short time because they are usually read while being passed at high speeds. Thus there are usually only a few words, in large print, and a humorous or arresting image in brilliant color...read more and download here
[2670]. DESIGN AND CONSTRUCTION OF AN INTELLIGENT VEHICLE OVER SPEED DETECTION AND REPORTING SYSTEM USING ARDUINO AND GSM: This work is on a device to detect rash driving on highways and to alert the traffic authorities in case of any violation. In past, lot of devices to detect rash driving on highways has been made...read more and download here
[2671]. DESIGN AND CONSTRUCTION OF TEMPERATURE CONTROL AUTOMATIC SWITCH: This project is titled design and construction of a temperature control automatic switch. It is designed to control electric appliances such as electric kettle, oven, incubator, or lamp through the variation of temperature range (0°C -100°C) which must be set by the user or operator. And this can be achieved by the use of temperature sensor known as THERMISTOR. This thermistor is a temperature control device with a high or low resistance value which can go high or low when the temperature is increased or reduced depending on the type...read more and download here
[2672]. DESIGN AND CONSTRUCTION SMART HEALTHCARE MONITORING SYSTEM BASED ON IOT: Technology plays the major role in healthcare not only for sensory devices but also in communication, recording and display device. It is very important to monitor various medical parameters and post operational days...read more and download here
[2673]. DESIGN AND FABRICATION OF GARRI FRYING MACHINE: Traditional frying of cassava mash into garri continues to be an onerous and complex unit operation for food processors. It is highly labor intensive, tedious, unhygienic and low productivity compared with the time and labor invested...read more and download here
[2674]. DESIGN AND INSTALLATION OF A 4KVA HYBRID SOLAR POWER SYSTREM: Hybrid Inverter is designed to serve as a backup power supply for AC loads. The input power of hybrid inverter comes from PV system and AC grid which not only supply power to AC loads but also charge the battery bank when the power from AC grid or AC generator is present...read more and download here
[2675]. DEVELOPMENT OF IOT BASED SMART ENERGY METER READING AND MONITORING SYSTEM: The plan and improvement of a keen observing and controlling framework for energy meters continuously has been discussed in this paper. With the end goal to screen the energy consequently, diminish creation cost, the Remote Meter Reading System is produced. Remote energy meters were structured with prepaid appropriation framework...read more and download here
[2676]. RELIABILITY EVALUATION OF SECONDARY DISTRIBUTION SYSTEM IN NIGERIA: A power system is set up basically to meet the demands of the customers. However, interruptions which are largely unavoidable contribute to the unavailability of power and thus prevent power system from achieving this. In most cases, it is the sustained interruptions that greatly affect both the utility company and its customers...read more and download here
[2677]. REWINDING OF A 1.5HP SINGLE PHASE INDUCTION MOTOR: When a motor fails, the user must decide whether to repair or replace it. To make a proper decision, one must consider the cost of the repair, the availability of a replacement, the age of the motor, the electrical design required for the application, any special mechanical features, and the urgency of returning the failed motor to service...read more and download here
[2678]. MODELING AND ANALYSIS OF PROTECTIVE RELAYS FOR COMPONENTS SWITCHING AND FREQUENCY DEVIATION: This work is on power system protection. Power system protection concerns the detection of faults in the system from measured voltages and currents. However, non-fault voltage and current disturbances may lead to the inadvertent detection of a fault in the same way as voltage disturbances may lead to the tripping of end-user equipment...read more and download here
[2679]. STUDY OF A VOLTAGE /FREQUENCY RATIO METHOD OF SPEED CONTROL FOR THREE PHASE INDUCTION MOTORS: Higher percentage of electrical energy is consumed by electric motors in loads like variable torque fan, pump and compressor. Induction motors are the most important workhorses in industry and they are manufactured in large numbers...read more and download here
[2680]. DESIGN AND CONSTRUCTION OF A COST EFFECTIVE SOLAR RECHARGEABLE LANTERN: Nowadays, because of low energy or power consumption, low heat emission, low cost, the portability, wider application, energy saving bulb are highly used than florescent lamp which is powered and recharged using solar system...Read and download
[2681]. DESIGN AND CONSTRUCTION A MINI SOLAR HOME LANTERN USING LED: Nowadays, because of low energy or power consumption, low heat emission, low cost, the portability, wider application, energy saving bulb are highly used than florescent lamp which is powered and recharged using solar system...Read and download
[2682]. DESIGN AND CONSTRUCTION OF A 50W POWER AMPLIFIER: This work is titled the design and construction of 50W power amplifier...Read and download
[2683]. DESIGN AND CONSTRUCTION OF A SOLAR POWERED BLUETOOTH BASED HOME APPLIANCES CONTROL SYSTEM: Smart Home is a house that uses information technology to monitor the environment, control the electric appliance and communicates with the outer world...Read and download
[2684]. DESIGN AND CONSTRUCTION OF AN AUTOMATIC TRANSFER SWITCH USING ARDUINO: The need to protect electrical appliances from electrical power fluctuation cannot be over emphasized...Read and download
[2685]. DESIGN AND CONSTRUCTION OF AN AUTOMATIC TRANSFER SWITCH (ATS): Automatic transfers switch a device for use with a stand-alone generator, for supplying emergency power to a residence or small business...Read and download
[2686]. DESIGN AND CONSTRUCTION OF PROGRAMMABLE 3-PHASE MOTOR CONTROLLER USING ARDUINO EMBEDDED SYSTEM: This project is proposed to control the speed of the three-phase induction motor by using the Arduino controller. The Arduino controller is used to produce the pulse width modulation (PWM) signals...Read and download
[2687]. DESIGN AND FABRICATION OF CROSS FLOW TURBINE RUNNER FOR PICO POWER GENERATION: This paper describes the procedure for design and fabrication of a pico-hydro turbine...Read and download
[2688]. FOOT STEP POWER GENERATION USING PIEZOELECTRIC SENSOR: This work is on foot step power generation using piezoelectric sensor...Read and download
[2689]. FREE ELECTRICITY GENERATOR USING ELECTRO-MAGNETIC INDUCTION: The study for the search of renewable sources of energy is now a major concern worldwide as replacement to the high demand of fossil fuels...Read and download
[2690]. INVESTMENT ANALYSIS OF TIDAL CURRENT TURBINE IN NIGERIA USING ARTIFICIAL NEURAL NETWORK: Electricity remains an essential commodity and is one of the most used forms of energy which can be generated from renewable and non-renewable (re)sources...Read and download
[2691]. PROTECTION OF DISTRIBUTION TRANSFORMER ARISING FROM OVER- VOLTAGE: Increase in voltage for the very short time in power system is called as the over voltage....Read and download
[2692]. DESIGN AND CONSTRUCTION OF MICRO HYDRO POWER GENERATION: Energy is the key stimulus for rapid industrial development of all sectors of the economy. In fact, the availability of electricity (power) is of paramount importance for the economic and industrial development of a nation. The aim of this paper is to study to generate...Read and download
[2693]. DESIGN AND CONSTRUCTION OF AN AUTOMATIC SOLAR POWERED HAND WASHING MACHINE WITH HAND DRYER: The unhealthy pattern of washing and drying of hands in various restaurants and places of food selling and the rate of disease transmission such as corona virus and Ebola has prompted the need for this project. We have taken the standard mechanical...Read and download
[2694]. DESIGN AND CONSTRUCTION OF AN AUTOMATIC HAND SANITIZER: Using hand sanitizer reduces microbial counts and kills many harmful germs that could infect human being with the flu and other viruses. In order to keep a healthy and thriving environment, it’s critical that we take into account the health of our environment...Read and download
[2695]. STUDY OF THE EARTHING SYSTEM ON RCC POLES FOR 11KV DISTRIBUTION NETWORK: Power system equipment are very expensive, and so a very large capital investment. To maximize the return on this outlay, the system must be utilised as much as possible within the applicable constraints of security and reliability of supply. It is expected that power system should operate in a safe manner at all times. No matter how well designed...Read and download
[2696]. DESIGN AND CONSTRUCTION OF A REMOTE FAN REGULATOR VIA BLUETOOTH WITH ANDROID APP: This work is on cost-effective wireless FAN control system through Android mobile using arduino microcontroller. This is designed using mobile technology will be beneficial to our society. The System is made to satisfy the needs of elderly and physically challenged people. There are many ways to control the app that may depend on many variables like electrical, mechanical...Read and download
[2697]. DESIGN AND CONSTRUCTION OF AN ARDUINO-BASED AC LIGHT DIMMER: This work presents the construction of a light dimmer circuit that utilizes the current-regulating properties of a triac...read more and download here
[2698]. SEQUENTIAL DEVICE CONTROL USING TV REMOTE CONTROL: This work is on sequential device control using TV remote control. This device lets the user to switch ON and switch OFF up to nine devices sequentially from your...read more and download full material
[2699]. DESIGN AND FABRICATION OF MECHANICAL FOOTSTEP POWER GENERATOR: In this project we are generating electrical energy by means of a non- conventional method just by walking on the footsteps. Non conventional system for energies are very much required at this time...read more and download here
[2700]. DESIGN AND FABRICATION OF SOLAR REFRIDGERATOR: This paper presents the design of a solar powered refrigeration system. The design of the system takes into account the solar sorption principles which include both the absorption and adsorption...read more and download here
This material is a complete and well researched project material strictly for academic purposes, which has been approved by different Lecturers from different higher institutions. We make abstract visible for everyone.
All Project Topics on this site have complete 5(five) Chapters . Each Project Material include: Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation + References/Bibliography.
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
To view other related topics click HERE
To "SUMMIT" new topic(s) OR you did not see your topic on our site but want to confirm the availiability of your topic click HERE
Do you want us to research for your new topic? if yes, click "HERE"
IF YOU ARE SATISFIED WITH OUR SERVICES, PLEASE DO NOT FORGET TO INVITE YOUR FRIENDS AND COURSEMATES TO OUR PAGE.